Used Weiler Md 220 for sale (177)

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 Nsdpfx Abswa Dz Es Uekw weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: excellent (used), WEILER PRIMUS Type MD-G - Centre height: 125 mm - Centre distance: 400 mm - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix with tool holders - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Dimensions: LxWxH 1.3x0.8x1.6 meters / Weight: 450 kg Nodpfxjxw H Dbo Ab Uekw Errors and omissions excepted.

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Nkedpfx Aexqqmtob Uow

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws Nkedpfx Aboxv A I To Uow incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Year of construction: 1973, condition: excellent (used), turning length 125 mm Nkodpfxsxpxqwo Ab Uew weight of the machine ca. 0,4 t

Condition: used, 110 Kw / 150 hp model. Machine has been refurbished previously. Perfect for grinding full frozen blocks etc. Nedpeywpciofx Ab Uskw

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Nkodpfxsxt Ngqj Ab Usw Make: WEILER Model: COMMODOR Year: 1979 Technical Data Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm Nsdpfjwwl Izjx Ab Uskw turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: used, Year of construction: 1989, turning diameter over bed 300 mm turning diameter over slide rest 150 mm turning length 800 mm spindle bore 36 mm Nkedpfx Aerdwfzsb Usw turning speed range 42 - 2000 U/min feeds 0,011 - 0,91 mm/U tailstock quill taper MT 3 total power requirement 2,2 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used!

Condition: used, Year of construction: 2000, machine/vehicle number: 4645, This WEILER centre lathe, model Praktikant, is being auctioned in our industrial auction/machinery auction for the insolvency of MarGenius GmbH & Co. KG – machines, tools, material, and office equipment – conducted online. Nedoyxd E Ijpfx Ab Uskw

Condition: good (used), Year of construction: 1997, greates pass round over bed 330 mm turning dia. over face-slide 185 mm centre height 165 mm turning length 750 mm spindle turning speed range 22-2800 U/min spindle passage 40 mm tailstock quill taper MT 3 quill stroke 110 mm total power requirement 3 kW weight of the machine ca. 1,04 t dimensions of the machine ca. 1850 x 880 x 1290 m Well-maintained machine from a training workshop Accessories/Equipment: - Heidenhain 3-axis digital readout - Multifix holder - Multifix cassette (3 pieces) - Forkardt 3-jaw chuck - Various machine keys Nedpfxoyxhike Ab Uekw - Machine feet - LED work light - Chuck guard with electric shut-off - Turret stop - Operating instructions

Condition: good (used), WEILER Lathe COMMODOR B Year of manufacture: 1987 with HEIDENHAIN 3-axis digital readout Center height: 190 mm Center distance: 750 mm Swing diameter over cross slide: 190 mm Spindle bore: 56 mm Spindle speed range: 25–2,000 rpm Number of speed steps: 18 Nkodpfxjxz Rc Ne Ab Usw Motor power: 2/4 kW Longitudinal feed: 0.022–0.8 mm/rev Cross feed: 0.011–0.4 mm/rev Number of feeds: 200 Metric thread pitches: 0.3–10 mm Weight: approx. 1,500 kg Dimensions: 2,350 x 1,000 x 1,450 mm Technical data not binding! This machine is ideal for users who require a large spindle bore. Accessories/Equipment: - 3-axis HEIDENHAIN digital display - Independently adjustable faceplate - Electrically interlocked chuck guard - Multifix toolpost size "B" - Machine lamp - Coolant system - Rear chip guard - 2 emergency stop buttons - Bed stop - Fixed steady rest (as new) - Traveling steady rest (as new) - Röhm 3-jaw chuck - Revolving center - Fixed center - Catch plate - Faceplate Available from March 2026 from Vocational Training Center "Due to its quality and price, this machine is not suitable for private individuals." Condition: good to very good

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Nkjdpeyuyrujfx Ab Usw Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Nsdpfx Abjyg Rfij Uekw Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg Nkedpfoyu R H Nox Ab Uow

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Nkodpfxjyub Spo Ab Uew Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) Njdpfx Aoyah Rvsb Uokw - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 280 mm, WEILER MATADOR VS2 Weiler Matador VS2 lathe in very good condition from an educational institution, year of manufacture 1991, original paintwork, with Heidenhain digital readout and accessories. Technical specifications: * Machine number 91-102 * Centre height 140 mm * Distance between centres 500 mm * Speed: 15 / 3550 rpm Nkjdpfxjytd U Re Ab Ujw * Spindle bore 36 mm * Spindle nose DIN 55027 -5 * Tailstock MK 3 * Automatic feed from 0.012 to 0.9 mm/rev * Thread cutting capability: metric, inch, module, and diametral pitch threads * Metric thread pitch from 0.25 to 12 mm * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * 3-jaw steel chuck * Motor with brake * Multifix quick-change toolpost with 4 holders * Drill chuck * Rotating centre * Change gears * Electronic spindle protection * Machine manual in German.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 320 mm, turning length: 650 mm, spindle bore: 40 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, WEILER PRAKTIKANT 160B Weiler Praktikant 160B lathe in excellent condition, with many accessories. Year of manufacture: 1993. Technical specifications: * Machine year of manufacture: 1993, Machine number: 160 3471 * Centre height: 160 mm * Distance between centres: 650 mm * Speed: 16 steps, 48 / 2500 rpm * Spindle bore: 40 mm * Spindle head: DIN 55027 5 * Tailstock taper: MK 3 * Automatic feed from 0.02 to 0.63 mm/rev * Capable of metric, imperial, module, and diametral pitch threads * Metric thread pitch from 0.25 to 8 mm Nkedpfeytd Ukex Ab Uow * Switchable spindle brake * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * Several collets * 3-jaw steel chuck Rhom with 2 sets of jaws * 4-jaw chuck * Multifix A with 4 holders * Bed stop * Fixed centre * Change gears * Machine feet * Machine manual in German.

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel Nkodoyu Iliopfx Ab Uew :- Chuck guard with limit switch monitoring :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical data Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm Nodpfx Asyuy D Rsb Uekw Bed width: 205 mm Infinitely variable speed: 30 - 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: Taper DIN 228, MK 3 Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Dimensions (LxWxH): approx. 1600 mm x 950 mm x 1700 mm Equipment / Accessories Siemens SICOMP IMC 05 3-jaw chuck 4-jaw chuck Quick-change tool post system Multifix with 6 holders Bed stop Drill chuck with taper arbor Collet chuck Large collet set Fixed and travelling steady rest Coolant system Emergency stop switch Machine light Change gear set Operating tools

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Nodpjyucf Refx Ab Ujkw Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation Nodpfx Aboyucd To Uokw – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. We can overhaul a machine from you or deliver a machine from us. Njdpfx Aofhnr Iob Ujkw

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 x 750 Precision Lathe (2007) Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2011 Availability: from April-May 2026 Condition: very good, used Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool shank cross-section: 20 x 20 mm Spindle nose according to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40.5 mm Main spindle internal taper: 5 mm Njdjyw Tkdopfx Ab Uokw Drive power 60%/100% duty cycle: 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Cross feed force: 3,000 N Feed range: 0.001 - 10 mm/rev Rapid traverse (longitudinal/cross): 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 TPI Module threads: 0.125 - 28 mm DP threads: 224 - 1 DP Max. number of thread pitches: 99 Quill diameter: 50 mm Quill stroke: 130 mm Quill internal taper: MT3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Weight: 1,300 kg Scope of delivery: - Collet chuck system - Multifix quick-change tool post - Machine lamp - Coolant system - Machine feet - Original documentation