Used Weiler for sale (201)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Iedpfoz Dgvnox Angjbb Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm Ibodpfxoz A Tgqe Angjb >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: used, Year of construction: 2009, power: 11 kW (14.96 HP), spindle mount: MK 6, rotational speed (max.): 2,800 rpm, rotational speed (min.): 9 rpm, total width: 1,456 mm, total length: 4,500 mm, total height: 4,600 mm, overall weight: 12,100 kg, Equipment: CE marking, We offer this used WEILER VO 100 radial drilling machine, year of construction 2009. Manufacturer: WEILER Holoubkov S.R.O. Model: VO 100 Serial number: 152 452 057 Weight: 12,100 kg Year of manufacture: 2009 Country of manufacture: Czech Republic Ibedpfx Aez A S D Isngjb If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1999, operating hours: 36,151 h, functionality: fully functional, Disassembly, loading, and transport are the responsibility of the buyer. Sale only within the EU. Iedpfxszzvxcj Angsbb

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm Ibjdezzcfpspfx Angeb - Main spindle: 8,000 rpm - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment - Fully functional - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Isdpfx Ansyuyrujgsbb Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Ibsdpfx Ajzy Sr Nengsb Year of manufacture: 2018 Condition: Used Operating hours: 8563 h

Condition: like new (used), Year of construction: 2013, Weiler Praktikant VCD Precision Lathe (2013) Manufacturer: Weiler Type: Praktikant VCD Precision Lathe Year of Manufacture: 2013 Condition: used, very good, like new, no signs of wear, including new maintenance and inspection report prior to sale. Distance between centers: 650 mm Swing over bed: 160 mm Swing over cross slide: 320 mm Swing over compound slide: 190 mm Cross slide travel: 150 mm Compound slide travel: 110 mm Compound slide swivel range: +/-65° Bed carriage travel: 350 mm Bed width: 205 mm Tool holder cross-section (height x width): 20 x 20 mm Height from top slide to center line: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in the front bearing: 70 mm Spindle bore: 43 mm Internal taper of the main spindle: Metric 50 Drive power: 6 kW Spindle speed range: 30 - 4000 rpm Number of gear stages: 1 Iedpfx Aozza Nrongobb Number of spindle speeds: infinitely variable Number of feeds: 24 Longitudinal: 0.02 - 0.63 mm/rev Cross: 0.006 - 0.2 mm/rev Tailstock diameter: 40 mm Tailstock travel: 85 mm Internal taper of the tailstock: 3 MK Weight, without packaging and accessories: approx. 1150 kg Length / Width / Height, net: 1720x890x1700 mm Headstock / Back wall / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Housing of the display screen: Blue NCSS 4550-R80B.

Condition: good (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: HK06, spindle bore: 48 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 48 rpm, overall weight: 800 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 7 A, WEILER PRAKTIKANT GS Lead and Feed Spindle Lathe - Connection: 5.5 kVA - Distance between centers: approx. 700 mm - Center height above bed: 160 mm - Turning diameter above bed: 320 mm - Center height above cross slide: approx. 100 mm - Turning diameter above cross slide: approx. 200 mm Iodpezxzmyjfx Angsbb The machine is equipped with a tailstock, a Multifix tool holder, and a quick-change chuck, including a three-axis digital display from the manufacturer FAGOR. FCA D-72589 Westerheim - loaded onto a truck.

Condition: used, Year of construction: 2011, functionality: fully functional, WEILER C30 cycle lathe (2011) Manufacturer: WEILER Type: C30 cycle lathe Ibedpfezy Sq Eox Angob Year of manufacture: 2011 Condition: Used

Condition: used, Year of construction: 2012, functionality: fully functional, Weiler Primus VC Precision Lathe, manufactured in 2012. 3-axis digital display from Siemens with AC drive and stepless speed control. CE certified. Technical specifications: >> Year of manufacture: 2012, Machine No. HB 01 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev Ibsdpfx Anszl T Hxogjb >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display from Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck, 160 mm, with 7 sets of jaws >> Stop >> Mulifix, size A, with 4 steel holders >> Electric chip guard >> Machine lamp >> Spindle stop, drill chuck, center >> Change gears >> Splash guard About the machine: Offered for sale is a Weiler Primus VC lead screw and draw spindle lathe, manufactured in 2012, in very good condition. The control system, in combination with a precision lathe from Weiler, performs the following functions: graphical display of travel paths and travel direction, graphical representation of the coordinate system on the lathe, compensation of tool corrections, zero point shift to compensate for workpiece position, radius/diameter switching, graphical display of the main spindle direction of rotation, and graphical display of the position of the machine's speed potentiometer. This is a very nice lathe with AC drive and stepless speed control of the spindle. All slides move very easily and smoothly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that are as smooth as ground surfaces. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Iedpfsz A Ah Rjx Angobb Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over cross slide: 185 mm, spindle bore: 40 mm, spindle speed (max.): 2,800 rpm, total height: 1,290 mm, total length: 1,850 mm, total width: 880 mm, turning diameter over bed slide: 330 mm, type of input current: three-phase, overall weight: 1,150 kg, spindle mount: MK 5, Conventional lathe, Weiler, in good condition! Year of manufacture: 1996 Includes collet chuck! Iedpfx Anszx Uqlogsbb

Condition: used, Year of construction: 2003, Turning machine, cycle-controlled Manufacturer: Weiler Type: E50 Year of manufacture: 2003 Control system: Weiler cycle control D2 Operating hours: 15,164 Iedpfx Anezt S A Usgjbb Distance between centers: 1,000 mm Height between centers: 280 mm Chuck, max. diameter: 315 mm Max. diameter over bed: 570 mm Max. diameter over compound slide: 340 mm Max. diameter over tailstock: 600 mm Length of tailstock: 140 mm Workpiece weight, max.: 1,600 kg Spindle bore: 83 mm Spindle head: Size 8 Quick-change tool holder: Parat 4-way turret Includes 1 chuck, RÖHM, new! Dimensions: 2,850 x 2,280 x 1,750 mm Weight: 3,350 kg 18926ä

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Weiler Primus VC precision center lathe, year of manufacture 2008, 3-axis digital display, Siemens, with AC drive, stepless speed control, CE compliant! Technical data: >> Year of manufacture 2008, machine no. DB-01 >> Center height 140 mm >> Center distance 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display, Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck 160 mm with 5 sets of jaws >> Stop >> Mulifix size A with 4 steel holders >> Electric chip guard Ijdpezl T Trjfx Angobb >> Machine lamp >> Drill chuck, centering point >> Change gears >> Splash guard About the machine: Offered is a Weiler Primus VC lead screw and draw spindle lathe, year of manufacture 2008, in very good condition. The control system, in combination with a precision center lathe from Weiler, performs the following functions: graphical display of travel paths and direction, graphical representation of the measuring system on the lathe, compensation of tool corrections, zero point adjustment to compensate for the workpiece position, radius/diameter switching, graphical display of the main spindle rotation direction, graphical display of the position of the machine's speed potentiometer. A very nice lathe with AC drive and stepless speed control of the working spindle. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced with a ground finish. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Parallel Lathe WEILER type PRAKTIKANT 160 B Between points: 650 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 192 mm Centre height: 160 mm Spindle diameter: Ø 40 mm Rotation: from 48 to 2500 RPM Turret Multifix type A 3-jaws chuck Ø 135 mm Year of construction: 1999 2 speeds spindle motor - 3kW Threadings Metric + Whitworth Tailstock CM3 Scale 2 axes MITUTOYO Supplied with (see photos) : 1 clamps system Ibedpozwcn Nofx Angeb 1 4-jaws chuck Ø 135 mm 7 MULTIFIX tool holders + various tools ariousSet of clamps Voltage: 380 V Length: 1800 mm Width: 1100 mm Total height (with light): 2100 mm Weight: approx 900 KG

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 260 mm, travel distance Z-axis: 1,000 mm, overall weight: 1,510 kg, number of axes: 2, Horizontal turning machine manufactured in 2016. This Weiler DA 260 X 1000 features a robust design with a weight of 1510 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Weiler DA 260 X 1000 machine we have for sale. Contact us for further details. Isdpfxszylt To Angebb - Operating Voltage: 400 V- Control Voltage: AC 230 / DC 24 V- Connected Load: 11.5 kVA- Nominal Current: 15.5 A- Frequency: 50 Hz- Main Fuses: 32 A- Additional Components: Digital read-out (DRO) unit, lathe chuck, quick-change tool post, lathe tailstock center points, chuck jaws, splash guard back wall, chip tray / coolant pan, tool storage box with inserts, hand brushes, wooden V-block support, main switch, emergency stop button, machine light, chuck guard cover. Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2017, - Accessories included - Digital display WEILER VCPlus WORK AREA Maximum turning diameter over bed 360 mm Maximum turning diameter over cross slide 190 mm Distance between centers 800 mm Spindle center height 180 mm TURRET Ibodpszu I Amjfx Angsb Spindle head DIN 55027/DIN ISO 702-3, size 6 Spindle bore 57 mm Spindle diameter in the front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % duty cycle – / 10.5 kW Speed range 25 – 4,000 min-1 Number of speeds, infinitely variable FEED RANGE Number, infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREADING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill travel 110 mm Internal taper DIN 228 MK 3 WEIGHT Machine 1400 kg DIMENSIONS Length / Width / Height 2000 x 970 x 1730 mm

Condition: excellent (used), Year of construction: 2013, WEILER Praktikant GS – Precision lathe For sale is a used WEILER Praktikant GS precision lathe. Technical data: • Manufacturer: WEILER • Type: Praktikant GS • Machine number: ID03 • Year of manufacture: 2013 • Operating voltage: 400 V • Control voltage: AC 230 V • Connected load: 5.5 kW • Rated current: 7 A • Frequency: 50 Hz • Main fuse: 25 A • Design: 1 Ibsdpfxozl D Umj Angsb • Machine weight: approx. 710 kg The machine is ideally suited for use in workshops, training companies, and for the precise production of individual parts and small series. It is being sold as a used machine. Inspection and functional testing are possible by arrangement.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Ibodpeztyrqofx Angob Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: used, Year of construction: 2001, Lathe, cycle-controlled Manufacturer: Weiler Type: E70 Year of manufacture: 2001 Control system: Weiler cycle control D2 Operating hours: 68,950 Distance between centers: 2000 mm Center height: 360 mm Max. chuck diameter: 400 mm Max. diameter over bed: 720 mm Max. diameter over carriage: 430 mm Ibjdpfx Anszt S Ttegob Max. diameter over cross slide: 780 mm Length of cross slide: 160 mm Max. workpiece weight: 3,800 kg Spindle bore: 106 mm Spindle head: Size 11 Quick-change tool holder: Parat 4-position turret Dimensions: 4,030 x 2,443 x 1,900 mm Weight: 5,200 kg 9926ä

Condition: used, Year of construction: 1999, Cycle-controlled lathe Weiler E50 Year of manufacture: 1999 Control system: Weiler cycle control system D1 Operating hours: 28,506 Center distance: 1,000 mm Center height: 280 mm Max. chuck diameter: 315 mm Max. diameter over bed: 570 mm Max. diameter over compound slide: 340 mm Max. diameter over offset: 600 mm Length of offset: 140 mm Max. workpiece weight: 1,600 kg Ibodpfx Anjzt S Svegeb Spindle bore: 83 mm Spindle head: Size 8 Quick-change tool holder: Parat 4-position turret Includes 1 RÖHM chuck jaw, new! Dimensions: 2,850 x 2,280 x 1,750 mm Weight: 3,350 kg 18926ä

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Commodor B AC lathe, manufactured in 1996, with a 3-axis Weiler digital display, three-jaw chuck, Multifix system, rear splash guard, and electric chuck guard. The machine is in good, operational condition and can be demonstrated under power by arrangement. Ijdpjzr El Tsfx Angsbb

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Praktikant 160 AC lathe, manufactured in 1996, with a 3-axis Heidenhain digital display, three-jaw chuck, Multifix system, rear splash guard, electric chuck guard, collet chuck system with a set of collets, and change gears. The machine is in good, operational condition and can be demonstrated under power by arrangement. Ibedpfozpfw Dex Angeb

Condition: ready for operation (used), Year of construction: 2005, L & Z Lathe / WEILER DA 210x1000 / With new 3-axis digital readout - Year of manufacture: 2005 - CE marking - Guideways in good condition - FULL TECHNICAL DATA SEE PHOTOS - Three-axis digital readout "NEW" - Quick-change collet system incl. 79 collets (173E) - Multifix base holder with inserts - 3-jaw chuck - Electrical chuck guard - Additional sliding guard - Coolant system - Drill chuck / live center - Chip guard rear wall - Work light - Complete documentation Dimensions: LxWxH 2.8x1.2x1.8 meters / Weight 1600 kg Iodpfoy H Ikqsx Angsbb Errors / input mistakes excepted.