Used Cnc Lathes for sale (11,461)

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, turning diameter: 220 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 580 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €342,000! Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. bore / max. passage: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter spindle / Sub spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Dodpfx Aoy Ukhhsl Uekn Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Counter support Morse taper: CM3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven tools Number of rotary stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque max. / S1: 42 / 32 Nm Liquids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubricating oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage according to table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS Control model: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with a set of soft jaws for right spindle Measuring arm Hinged band chip conveyor with side discharge Upper turret station (T1) double high-pressure pump (6+15 bar, 55 l/min) Inner turret station (12) double high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic part unloader Part unloader with pneumatic opening and closing function for catching ejected parts Pneumatic part ejector for counter spindle with 100 mm stroke, stroke adjustment and end position sensor Unimag interface for bar feeder

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 162881, turning diameter over cross slide: 410 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 80 mm, rotational speed (max.): 3,800 rpm, TECHNICAL DETAILS Swinging diameter over bed: 530 mm Swinging diameter over carriage/slide: 410 mm Distance between centers: 1,000.00 mm Maximum turning diameter: 340 mm Maximum machining length: 1,000 mm Travel X-axis: 260 mm Travel Z-axis: 1,016 mm Travel X-axis (B-axis): 139 mm Travel Z-axis (B-axis): 965 mm C-axis: 360° Control: Okuma OSP-P200LA Dodpfx Aloy U T Dlo Uskn Spindle speed: 38–3,800 rpm Speed ranges: stepless, automatic range selection Spindle nose: Option A2-8 Big Bore Spindle bore: 80 mm Main drive motor: 22.37 kW Torque: 412.17 Nm Upper multitasking turret: V-12 NC turret Lower turret: V8 (VDI) Indexing time without lifting: 0.18 s Speed of driven tools: 45 – 4,500 rpm Motor for driven tools: 7.08 kW Feeds X/Z: 333.16 / 416.56 mm/s Feed C: 3.333 rpm Tailstock spindle diameter: 90 mm Tailstock taper: MK #5 Tailstock travel: 120 mm MACHINE DETAILS Machine weight: 8,800 kg Supply voltage: 220/480 V Phases: 3-phase Frequency: 60 Hz Rated apparent power: 31 kVA Full load current: 81.7/37.5 A Largest motor rated current: 96 A Short-circuit rated values: 30/10 kA

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Dsdpfx Asza D Rfsl Uskn Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Dkodoza D Iwspfx Al Ujn Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: used, Year of construction: 2017, INDEX C200 Mfd. 2017 Tooling in photos to be divided between 3 C200 machines available. Power-on hours: ~49,960 h Hydraulic hours: ~48,700 h Main spindle hours: ~24,800 h Counter spindle hours: ~24,000 h Stroke mm 20 Clamping pressure min.Max. bar 8/80 Piston Area pressure cm^2 57 Area piston thrust cm^2 57 pressure Force Max. CN 45,6 Tensile force Max. CN 45,6 10350989 1 INDEX C200 CNC-turning machine with 3 revolvers with Siemens-Based Index C200 control system SINUMERIK 840D SolutionLine - Rigid cast iron bed, perpendicular angle to the ground, excellent gradient chips - The kinematics of tool head movements guarantees maximum damping, reducing tool wear - Patented plate supports with excellent properties damping and stiffness The motion of the X-axis is derived through kinematics. "double scissors" guaranteeing high dynamics - Thermosymmetric spindle Control system Index C200 Identical to SIEMENS SINUMERIK 840d SolutionLine - Modular multiprocessor control system, SINAMICS with 120 drives - Siemens Operate control box, display in language Germany - language switching WINDOWS and flat screen - 2x USB 2.0 connection on the control panel, 2x USB connection on the control panel - NCU 720.3 B PN NCK - Integrated PLC 317-3 PNDP and ET200S - Security features implemented in software through SIEMENS Safety-Integrated and ProfiSave Extended machining cycles consisting of: Einstechzyklus Freistechzyklus Dkodpfx Ajy Um Rrjl Uen Gewindestrehlen with 4 point move Lighting work. space in LED design 1 flat color TFT screen, 18.5" PCT-Touch IP65 front panel 10142338 1 Main spindle dia 65 Spindle end AD140mm, ID 85mm Material passage Max. mm 65 Speed max. 1 / min 5000 Front bearing diameter mm 110 Power 100% / 40% kW 31,5/32 Torque Max. 100%/40% Nm 125/170 Continuously synchronous variable speed drives Main spindle with hollow clamping cylinder D65/20 for pincer clamping or Chuck clamping Hydraulic control with clamp metering C axis of main spindle Drive: hollow spindle motor clamping cylinder, metering system directly on the spindle Resolution 0.00014 degrees Positionsstreubreite (VDI/DGQ 3441) Psmax = 0.01 degree 11040430 pressure clamping device Clamping pressure 8-75 bar adjustable For anti-spindle clamping cylinder 10038475 1 tool carrier 1 X-axis work vehicle mm 110 X-axis quick shift m / min 30 X-axis acceleration m / s^2 9 X-axis shear force N 5000 Z-axis work vehicle mm 320 Z-axis quick feed m / min 50 Z-axis acceleration m / s^2 9 Z-axis shear force N 5000 Y-axis working vehicle mm 100 Y-axis quick feed m / min 15 Y-axis acceleration m / s^2 9 Y-axis shear force N 5000 Offer: 1702114 - 02 / 30.3.2017 CNC-lathe INDEX C200 (GP3790. 0000F) Revolver 1: 14 stations with cylindrical shank clamping D25x48 (DIN 69880), W-grooves on the revolver-higher repeated accuracy when replacing the tool. Centering plate set, V-strips, not content of delivery, must be ordered separately. Gearshift revolver AC motor, hydraulic locking A driven tool is possible in each station of the revolver 1 . Power 25% kW 10 Torque 25% Nm 16 Speed max. 1 / min 8000 10720950 1 tool carrier 2 X-axis working vehicle mm 110 X-axis quick shift m / min 30 X-axis acceleration m / s^2 9 X-axis shear force N 5000

Condition: used, Year of construction: 2024, Tsugami B0205-VR CNC Swiss-Type Lathe Dkedpfoy Um N Isx Al Uon Mfd. 2024 Hours: 73 NEVER RAN PRODUCTION! Accessories & Options: Fanuc 0i-TF Control Fire Trace Fire Suppression (5 lbs) B0-WORK-KIT MKIII Work Conveyor Through Sub-Spindle Coolant with Pump Abile Programming Software Edge Scout 320 Barfeed Two Channel Sets Specifications: Max Machining Diameter: .787" Max Headstock Stroke: 6.69" (Guide Bushing) / 1.771" (Chucker) Main Spindle Speed: 10,000 rpm Sub Spindle Speed: 12,000 rpm Live Tool Spindle Speed: 8,000 rpm Tool Positions: 21 Sub Spindle Max Machining Diameter: .787" Sub Spindle Front Ejection Max Length: 3.15" Max Tool Spindle Slotting Cutting Diameter: 1.18" Rapid Traverse Rate: 36M/min Main Spindle Motor: 7.5 hp | Sub Spindle Motor: 5.0 hp Coolant Tank Capacity: 47 gal. System Input Power: 13.0 KVA Compressed Air: 60 psi Dimensions: 69" x 41.5" x 67" | Weight: 3,968 lbs

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder Dksdpfx Aljq Npqms Uen 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 250 mm, turning diameter: 210 mm, spindle bore: 100 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 1,355 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 370 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,675 mm, total length: 4,400 mm, total width: 2,100 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, overall weight: 5,000 kg, We offer this very good Biglia BV 210 CNC vertical lathe, year of construction 2005. Dodpfx Ajzbdgcjl Uskn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Dkodpfowcfgbsx Al Uen Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: excellent (used), Year of construction: 2000, INDEX ABC CNC Lathe. Mfd. 2000 Control: Siemens 840C Capacity 65mm Ran oil Still in production, running nylon With 12-ft Bar Feed (pictured) Chip Conveyor Comes the a good amount of tooling Control Type: Siemens SINUMERIK 840C Spindle Speed (max.): 6,000 RPM Power Requirements (V/Hz/PH): 400/60/3 Main Spindle Speed (max.): 6,000 RPM Dksdpfx Alew Td U Re Usn Bar Capacity: 65 mm Power: 20 kW (at 100%) Power: 27 kW (at 40%) Synchronous Spindle Speed (max.): 4,500 RPM Power (max.): 4.2 kW Capacity Tool Carrier 1: 8 (7 + synchronous spindle) Tool Carrier 2: 6 Dimensions Bar Feeder: L 150" x W 27" x H 52" Turning Center: L 80" x W 48" x H 65" Power Enclosure: L 52" x W 18" x H 70" Chip Conveyor: L 88" x W 48" x H 35"

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Dsdertrlzepfx Al Ujkn Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Dkjdjv Nw Npepfx Al Uen Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 Dkedpfxswwarus Al Usn tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor Djdpezb Ipzofx Al Uskn 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Dkedpozbhc Iefx Al Uon Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Tailstock Coolant tank and tray 6 tool holders Dksdpfx Ajzakk Eel Uen

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Tailstock Coolant pump and tank Dkodpfx Aezakgtol Usn Swarf conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck 720mm swing Dodszaix Iepfx Al Uskn 2000mm between centres 8 station turret Coolant pump and tank Swarf conveyor

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo 2-Axis X,Z Turning Center CE Certified Puma 250B Model Fanuc CNC Control Year 1998 Sold as a Complete Unit Chip Conveyor Documentation Included Dsdpfxezb Ik Ss Al Uokn Reference: A044

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Dkodoxrg S Ispfx Al Usn Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: used, Year of construction: 2007, functionality: fully functional, CN ROSILIO TBI 280 TURRET LATHE Djdpfxszbidte Al Uskn Machining Capabilities • Swing over bed: 280 mm • Maximum machining diameter: 220 to 250 mm, depending on the version • Maximum machining length (Z-axis): 350 mm • X-axis travel: 145 mm (including 20 mm below zero) Spindle • Maximum speed: 6000 rpm • Spindle nose: A2 5 • Motor power: 5.5 / 7.5 kW • Spindle bore: 42 mm • Chuck: hydraulic Turret • 8-position VDI 30 intelligent turret • Coolant supply to each position Available CNC Controls • Siemens 802D SL General Data • Rapid traverse rates: o X-axis: 10 to 15 m/min o Z-axis: 20 to 30 m/min Tailstock: o CM4, sleeve Ø70 mm, travel 65 mm, total travel 400 mm Footprint: 2000 × 1450 × 1800 mm Weight: 2200 kg

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm Dodpfjzcd Hlox Al Uskn - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: used, Year of construction: 2000, max swing diameter 700mm, X/Y 255/520mm, tailstock, 12-position tool turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12t Dedpfx Aoym Sm Uol Uekn

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 455 mm, turning length: 1,000 mm, spindle bore: 107 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 4 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 3 m/min, Equipment: documentation/manual, rotational speed infinitely variable, The machine is currently still in operation but will be decommissioned due to the operator’s retirement. Available from week 30. Dkjdpfezbik Tsx Al Usn

Condition: good (used), Year of construction: 2011, 575mm centre height, 3000mm between centres, maximum cutting diameter 950mm, Djdpfx Alsy U Nume Uekn FANUC 21iTB, 230mm spindle bore, 22/26kW motor power, 7-400 rpm spindle speed, 12 station turret, steady, 4 jaw chuck, swarf conveyor