Used Reiser for sale (20)

Condition: good (used), Rotary unit, rotary device, turning table, conveyor belt, container rotary device, welding rotary device, welding device -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring Dceleca Iatjhccqmek -Device is: pneumatically tiltable -Dimensions: 2520/800/H380 mm -Weight: 524 kg

Condition: good (used), Rotary unit, rotary device, turning table, turning unit -Roller conveyor length: 850 mm -Rollers: Ø 80-120 mm Dsleb A Ib Ejhccqmsck -Roller spacing: 190 mm -Roller width: 220 mm

Condition: excellent (used), Year of construction: 2017, Reiser GK512B Vacuum chamber packaging line Dcolhcswtzd Rocqmok 2017, Stainless vaccum chamber packaging line, consisting of Supervac GK Vacuum chamber, Supervac AT hot water shrink tank and Supervac BL15 Drying tunnel, also comes with Supervac BG450 bag opener, 3Ph

Condition: used, UV drying system Totalisator operating hours 1484 The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. Dcelhccqjzr I U Demok No direct connection to the pre-machines/devices is required. It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Year of construction: 2000, condition: used, - 5 printing units - 1 flexo coating unit - 6 UV drying units (air-cooled) - Rotary die-cutting unit - GAP Master Dcjlhcey H U Uiocqmok - BST video web monitoring system Fully rotary, 355.6 mm Maximum web width: 340 mm Minimum web width: 120 mm

Year of construction: 1989, condition: used, LACO 52 Inline Coating System Supply voltage: 220V Weight: 84 kg Dslhcszrm R Rjcqmeck Coat volume: 3.5 liters

Condition: used, Year of construction: 1988, - Processing - 4 printing units (letterpress) Dcolhccszq U U Ioqmjk - UV coating - Die-cutting - Winding

Condition: used, The Lemorau CT 1500 is a manual core cutter. It offers quick and easy conversion for various core diameters and wall thicknesses. The CT 1500 is very easy to operate: after the core has been slid onto the mandrel, the operator adjusts the end stop, which determines the width of the core cuts. The operator then presses the start button, lowers the knife using the handle, and cuts the core. - Maximum core length up to 1500 mm (59”) Delhccjzq U Uzeqmock - Standard core diameters 25, 40, 50, 76 mm (1”, 1.57”, 2”, 3”) - Other sizes up to 152 mm (up to 6”) available as an option - Maximum measured cutting length 330 mm (13”) - Maximum wall thickness 6 mm (0.23”) for cardboard - Two-hand operation for operator safety

Condition: used, The GM PN100S model is an automatic core cutter for cores with a maximum length of 100 cm. Delhccqezq U Unomsck The device is operated via a touch display. Max. wall thickness: 10 mm Core inner diameter: 25 mm (1") - 120 mm (4.7")

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Splice detection: Yes Check for missing labels: Yes Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Djlhozq U Syjccqmsck Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment Dcjlhccqezqnxtsmjk 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: used, A Heidelberg cylinder press (OHT) has been converted and equipped with a die-cutting unit from PRACMATIC for printing labels on rolls. Dslhjzgi Tdjccqmjck

Condition: good (used), 3:1 Wire punching and locking system Dcslhcezd Hkzscqmek Stamping tool 3:1, round hole 4 mm Working width up to 420 mm Max. stamping capacity per the manufacturer: 30 sheets/80 g/m² foot switch operation manual A small palette with 3:1 wire-binding elements is included in the delivery.

Condition: good (used), RENZ WP 300 Dispenser for RENZ RingWire wire comb elements The RENZ WP300 is designed for separating RENZ RingWire wire comb elements from the carrier cardboard (wire pack). Delhcozdym Aecqmjck Accessories: Connecting cable WP300 for the ECL binding machine Machine documentation Dimensions (L x W x H): 54 x 40 x 33 cm Weight: 30 kg

Condition: good (used), RENZ WP 300 Dispenser for RENZ RingWire wire comb elements The RENZ WP300 is designed for separating RENZ RingWire wire comb elements from the carrier cardboard (wire pack). Dcslhjzdymisccqmok Accessories: Connecting cable WP300 for the ECL binding machine Machine documentation Dimensions (L x W x H): 54 x 40 x 33 cm Weight: 30 kg

Condition: good (used), NAGEL Rinak stapler with base Electric stapler for block stitching and saddle stitching for brochure production Block stitching: up to 4 mm / approx. 40 sheets (80g/m² paper) Saddle stitching/brochures: up to 3 mm / approx. 30 sheets (80g/m² paper) The feed table can be easily adjusted for block or saddle stitching Stapling head stroke adjustable Benchtop machine for mounting on the table Dcoljzb Uuwehccqmek Staples: 26/6, 26/8S, Ri 26/6 Staple magazine capacity: 210 pieces Insertion depth: 30 mm (for block stitching) Connection: 230 V / 50 Hz Weight (net): 7.5 kg *Information according to the manufacturer and without guarantee!

Condition: used, Electric drive Cycle initiation via foot switch Various tools included in the scope of delivery: 1 x upper/lower blade with 4 mm radius 1 x upper/lower blade with 6 mm radius 1 x upper/lower blade with 7 mm radius Djlhjythzujccqmsck 1 x upper/lower blade with 8 mm radius 1 x upper/lower blade with 9 mm radius 1 x upper/lower blade with 15 mm radius (currently installed)

Condition: used, Punching machine for, e.g., slipcases with many punching dies Dslsxw N Ntjhccqmsck

Condition: used, working width: 500 mm, Electric edge banding machine with integrated grooving unit. Feed width approx. 500 mm The following glue application rollers are included (the glue tank can be adjusted to match the width of the required glue roller): 1 x 13 mm width 1 x 15 mm width 1 x 17 mm width 1 x 19 mm width 1 x 21 mm width 1 x 23 mm width 1 x 25 mm width Delheytxw Hjccqmjck 1 x 27 mm width 1 x 33 mm width

Condition: excellent (used), functionality: fully functional, Vemag ASV811/Reiser RUK-CONV-006 Portion Cutter Pneumatic cutting device For processing a wide range of products, e.g. fresh food cubes, chew sticks and granules. Can be used with the VEMAG Robot500 robot or vacuum filling machines from the VEMAG HPE series High cutting capacity of up to 140 portions per minute Optionally equipped with a knife or wire cutter Dcslhcev Abglscqmsk