By clicking "Accept", you consent to the use of analytical cookies (which are used to gain insight into site usage to improve our site and services for you) and tracking cookies (both from Machineseeker.com and from other trusted partners, including from outside the European Economic Area, where there may not be a comparable level of data protection, such as the United States). The latter helps us determine what products we show you on our site and elsewhere, and to measure the number of visitors to our websites.
Handfeeding station for one person, Gathering machine, model: 3692 - 16x, ASIR III Automatic Signature Image Recognition (barcode), ASAC Automatic Self Adjusting Caliper, Excluding pump(s), Setup element, Optional available:, Additional gathering element(s), -: Müller Martini 3692 - 2018 (1 element / 4 stations), Reject gate, for incomplete products: 3715, Criss cross delivery, model: 3635, Hand feeding station for one person, End sheet gluer, model : A461, Intermediate element with jogger, Tran...
Stahl TS49 4/4
Pharmaceutical folder
Maximum sheet size: 70 x 50cm
Single sheet suction feeder
Sound hoods on both upper units
Feeder pump
Cross fold (Second unit)
Batch counter
O7tpj
Books / manuals
We will even load it to truck free of charge for you.
Schmedt PraForm HHS 2100 book press
Book press with joint forming
Produced by Schmedt, Germany.
Technical data:
max format: 400x 520x 100 mm
Weight 250 kg
380V power supply
Fyxckdtui
/ year of construction: approx. 1990 / max. sheet size: 560 x 900 mm / min. sheet size: 140 x 180 mm / output: max. 30.000 cycles/h (according to manufacturer) / equipped with: 4 cassettes, 2 cross fold knives and delivery table
Bn028knsik
Copilot system with touch screen monitor, Board magazin for manual loading, Centre strip infeed, Chopper for the centre strip waste, Third transporter for stiff spine board, Viscosity control, Glue unit with pre-heated glue tube, Cloth feeder, Device for inside lining with hot glue, Device for producing padded cases, Pressing station, Stacking delivery, Automatic case counter, Electrical specification: 400 Volt - 3 Phase - 50 Hz
Ytem3o
This stand alone PUR glue unit is for converting your
existing 1-3 clamp binder into a PUR binder. It is self powered
and was bought by our client in case his existing PUR broke
down.
Inatec PUR System
5 litre pre-melter with fast melt mode
2 metre heated hose with nozzle
Like New Condition
Age: 2004
Suitable for a binder maximum 1500 cycles per hour
This unit was purchased as a back up for an existing PUR unit and
Bvp9vsfq
only used as an insurance.
This 3738 Streamfeeder turns feeding of your perfect binder or saddle stitcher a lot more efficient. Further Streamfeeder available on request.
Bibo8kbqip
Square Press Hohner SP Plus
The device is used to form the spine in brochures creating a perfectly square spine that looks like glued or hard binding.
An additional advantage is the flat product that does not open automatically.
The device is in perfect condition, 100% functional, like new!
Technical data:
Working width 350mm
Capacity 1000-1300 cycles / h
Material thickness 1-6.5mm, approx. 30 sheets
230V power supply
Weight about 100 kg
Possibility to put the material on a stacker or pick it u...
Book cover machine: - Cardboard pre-stacking belt for automatic refilling of the magazines - Schrenz feed for the spine insert from roll material - Schrenz waste shredder - Device for automatic gluing and changing of the roll schrenz while the machine is running - Blank feeder for non-stop operation with stack magazine - Missing blank control during separation -. device for mirror gluing with hot glue - viscosity control device - glue application adjustment from outside - rolling device for crea...
Three knife trimmer Wohlenberg 75i with year of construction 2005. In good condition, with infeed from the right, integrated pre-stacker, cutting cassette system, 2 sets of knives
W2qrr8w
Face cutter
Type: 78 XS
Year of manufacture: 2004
Machine no.: 7461120
Btmhibc7pp
- cutting width: 78 cm
- digital program
- chrome-plated air cutting table
- 4 knives
- condition: very good (used)
- Availability July 2021
Viewing possible by appointment.
Book blocks for hard cover books with lining using hotmelt, Book block feeder, model: MBT Masuri Bookbloc, End sheet gluer with hotmelt glue, model : VA 422 (HHS hotmelt), Transfer into the binder, Model: KM 411.B, Number of clamps: 30, Co-pilot with touch screen monitor, Main milling station, First spine preparation station, Second spine preparation unit, Excluding dust extraction system, machine was connected to a centralised dust extraction system, Base for first spine gluing station, Base fo...
Renz ECL 360 Electric Wire Closer
O7ee9
Perfect condition, ready for production.
Electric spiral crimping device ECL 360:
Electric clamping by foot pedal
Binding up to 34 mm (340 sheets) in one cycle
Capacity approx. 400 cycles / h, depending on the type and format of the material
The foot-operated cycle activation allows you to position the material with both hands
Supports 3/16 ”- 1 1/2” diameter spirals regardless of pitch
Quick settings of various spiral diameters in seconds
Quiet work. The ...
GUK FA36/4-SAF
Flat pile feeder
Btlap8wlzo
format max. 36 x 65 cm
4 folding pockets
Availability: Immediately
used, year of construction 1997, good condition
Soft cover perfect bound books with hotmelt glue, Soft cover perfect bound books with PUR glue, Hand feeding station for 2 persons, Gathering machine, model: 1571 - 22x, Pump(s), Setup element, Reject gate, for incomplete products: 3715, Hand feeding station for one person, Transfer into the binder, Model: Acoro A5 (3026-20), Number of clamps: 20, Colour monitor(s) with touch screen, Automatic setting, Main milling station, First spine preparation station, Second spine preparation unit, Excludin...
The opportunity of creasing, folding and gluing all in one.
Dimensions 5,2 x 1,2 x 1,65 m
Bol0k32vqj
Feeder Mode: Flat pile feeder, Pocket Type: Gate fold buckle, Pocket Configuration: manual, Rollers Configuration: manual, Roller condition: n/a, Working width max: 520 mm, Fold length max: 1.200 mm, Gluing unit not included, Delivery mode: Shingle delivery with pressing, Sheet size max: 520 x 1.200 mm, Sheet size min: 150 x 200 mm
Book block rounding machine Tranklein BRM 500
Bth3gh83a3
The machine is in perfect condition, after the review, ready to work.
Technical data:
Max working format: 500mm
Max th. books: 120mm
Speed: 300 cycles / h
Power supply: 400V
Weight 300 kg
Easy operation, quick settings.
different twin press drinker, machine number 1443/744, plate size ~32cm x 45cm, a good condition, immediately available
If you are interested, we will also be happy to inform you about other machines in our company.
You are very welcome to visit the machine in our house after prior appointment.
Omgqp
Thread sewing machine: - feeder magazine - opening variant 2+2 - Commander with touch screen - automatic sheet type control ASIR 3 - book block stacker with belt delivery to the left - converter compressed air to vacuum PIAB
Vtwxzi
Wohlenberg Cover Folder Feeder for the production of 6- or 8-page flap-covers with symmetrical or asymmetrical flaps.
Bjkivpdpzy
Case size min: 140 x 308 mm, Case size max : 485 x 1002 mm, Mechanical speed max: 1.000 - 6.000 cyces/h, Case weight min.: 200 g/m³, Case weight max.: 400 g/m³
Book Stacker to suit Muller Martini Perfect Binding Line
Bsd7ryyqh9
Maximum Mechanical Speed: 16,000 Copies Per Hour
(dependant on book count per layer and book dimensions)
Corner cutter Pescha Type 105
Kcdjulez
Production Germany.
Very good condition . It is a professional device for rounding corners.
A solid cast iron structure and strong pressure ensure precise operation.
Replaceable knives.
Adjustable margins.
Large load.
Built in: 2010
Mech. Speed: 0,8 m/s
Cycle per layer: 50 s
Sheet size:
max 480 x 320 mm
min 200 x 110 mm
Number of pages:
max 8-32 pages
Vuaugi
bar length 500 - 1200 mm
Stream distance: 40 mm
Pile height: max. 1450 mm
Compressed air: 6 bar
Compressed air: 8 Nm³/h -6 bar
gross weight: 2550 kg
Handfeeding station for one person, Gathering machine, model: Kolbus ZU 841.A - 17x, Card gluer, Optical signature control system, Air center: Becker, Setup element, Reject gate, for incomplete products, Book block feeder, Intermediate element with jogger, Transfer into the binder, Model: Kolbus KM 473, Number of clamps: 32, Co-pilot with touch screen monitor, Semi automatic setting, Main milling station, First spine preparation station, Second spine preparation unit, Excluding dust extraction s...
Thread sewing machine: - feeder magazine - opening variant 2+2 - Commander with touch screen - automatic sheet type control ASIR 3 - book block stacker with belt delivery to the left - converter compressed air to vacuum PIAB
Bqjzbvms7f
This Müller Martini 382 card gluer is used with a saddle stitcher and is the perfect solution if you need to stick cards, small brochures, DVD, CD or notes. The position of the product can easily be defined and it is even possible to adjust it during production, avoiding any production interruption if the position need to be changed. This card gluer has a large feeder and the machine allows to choose between gluing the products or also to electrostatically block them
N0iwj
Hot Foil Lettering System DIDDE Schmedt EASYMARK 90 DL
Year 1990 - Serial-No. 7
Hot Foil Lettering System
Bjrrncla8w
-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Renz DTP 340A perforator
The machine is in perfect condition, ready for production.
Manufacturer’s description:
Semi-automatic device for perforation for a closed spiral, screwed in or for a plastic spine of the German company RENZ:
Device for electric perforation of paper, cardboard or PVC with a working width of 340 mm
The fastest perforating system in its class – up to 350 blocks / h A4 per hour
Perforates up to 35 sheets of 70/80 gsm (3.5 mm) in one cycle
Quick change of slats
Equipped wit...
Soft cover perfect bound books with hotmelt glue, Model: Ratiobinder KM 472.A, Number of clamps: 21, Solo Perfect binder, Hand feeding station, Main milling station, First spine preparation station, Second spine preparation unit, Third spine preparation unit, Hotmelt spine glue station, Hotmelt side glue station, Premelter for hotmelt spine gluing system, model: LH 370, Heating elements in curve, Stream cover feeder, Nipping and Pressing station, First nipping and pressing station, Gripper carri...
Used splitting saw which can be used in production lines or as an individual machine.
Bgzhp3co3
Infeed direction: Left, Size max: 305 x 510 mm, Size min: 100 x 250 mm, Block thickness: 5 - 80 mm, Saw blade thickness: 2.5 mm, Saw blade diameter: 450 mm, Mechanical speed max: 3.400 - 20.000 Blocks/h
Hydraulic Twin Press Tränklein ZP
Serial-No. 627
2 pressure plates - Size 440 x 320mm
Stack high 600mm
Space requirement 85 x 70 x 150cm
Weight net 420kg
Electrical equipment:
A.C. motor 400 volts, 3 ph.
50 cycles, 1,1 kW
Manual Included
-Online-Video-Inspection by Skype-Video-
Gwe0rs
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Case in machine Schmedt PraLeg XL HHS 1840
Bs9dm2ee0w
The device is in perfect condition, very little used.
Virtually no signs of use.
The machine hangs the book block in the prepared hard cover.
Two gluers, smooth glue thickness adjustment.
The machine has full documentation with CE certificate.
Format:
Block height: 80 – 440 mm
Block width: 110 – 450 mm
Block thickness: 2 – 80 mm
Capacity about 200 – 300 pcs / h
230V power supply
Weight 300 kg
Hand feeding station for 2 persons, Gathering machine, model: ZU 832.A -15x, Number of gathering stations: 15 , Optical signature control system, make: SignaLynx, Automatic sheet thickness control: ATC, Air center: Becker VariAir, Reject gate, for incomplete products: AS 842 , Intermediate element with jogger, Transfer into the binder, Model: KM 600, Number of clamps: 21, Co-pilot with touch screen monitor, Hand feeding station, Main milling station, First spine preparation station, Brushing sta...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.