size max: 270x365x80 mm
size min: 100x100x6 mm
with case bender DBA
with VBF- Book Press and Joint Burning Machine, EP 260 R
size max.: 370 x 300 x 80 mm
size min.: 100 x 100 x 6 mm
speed: 50 strokes/min
Tensol 8m length of bending sheet metal up to 1 mm thickness in iron - aluminum more
Comes from Steve and cheap offered reasons of space!
Bends with rolling scissors hydraulic opening and closing hydraulic
For sale comes from a Commons resolution a used but good condition fully functional punching or stamping press.
With this engine were steel blanks marked.
Ronde diameter: 35 mm
including various stamping:
A22 / A34 / A41 / A43 / A50 / A60
Discharge height: 920 mm
Machine comes from a Commons resolution of to a major German industrial group and was accordingly UVV compliant equipped.
Space Lxwxh: 1000 x 900 x 1400 mm
Hardware drilling machine
Type: fitting drilling machines
Model: Minipress DA 12
Hole line 7 spindles
Furniture hardware holes
Drilling holes for furniture hardware
Drilling hole lines
Features: 2 pneumat. workpiece clamps
ready for action
Location: Western Germany
Availability: on demand
Terms of delivery: ex works
Terms of payment: 100% before dismantling/loading more
Folding bench Schechtl HA 300 bending length about 3 m thickness 1, 25 mm steel - ALU more hand and Fusschlieser depth stop is new ca €1000
Rolling scissors is high-quality new ca €2000
Loading free with Stacker
Blade diameter: 500 mm
Cutting width: 250 mm
Cutting height: 180 mm
Profile feed 2.5-600 mm manually adjustable with tape measure and Vernier
Fully automatic operation
Saw feed from below, hydro-pneumatic, adjustable from outside
Pneumatic profile voltage horizontal and vertical
Cutting height adjustable with limit switch
Hydraulic press Stromab SL3/6000
Max working dimensions : 1200 mm x 6000 mm
Overall dimensions : 8000 mm x 2300 mm x 1500 mm
Vertical joist with servomotor - 18 pcs
5 joist to preassure
Supporting foot with height regulation
Max thickness wood - 200 mm
Preassure joist on wood about thicnkess 120 mm - 11 kg / cm2
Preassure joist on wood about thickness 200 mm - 8,7 kg / cm2
Pressure of the hydraulic cylinder - 7200 kg
Joist with valve open/close more
RED2140T/0.8 + rolling scissors NK/0.8 + hand folding machine = 900 euro
Year of constr.: 2017
-maximum working width: 2140 mm
-Bending performance: up to 0.8 mm (steel)
-Titanium zinc sheet 0,8 mm, aluminum sheet 1.5 mm copper sheet 1.25 mm
-Bending angle: Max 145 degree
-Bending beam thickness: 15 mm
-the lifting of the upper bar in three positions
-Top beam stroke: 80 mm
-Scala of degree of
-Weight: 180 kg
The machine complies with the CE directives and has 12 ... more
Notching width: 200 mm max
Notching depth: 40 mm
Profile height: 100 mm
Vise clamping width: 100 mm
Feed length: 500 mm
Speed: 2,800 U / min
Electric milling feed by pressing the foot switch
Profile voltage by adjustable swivel vise.
Max working dimensions : 3000 mm x 1700 mm
Min working dimenions : 250 mm x 350 mm
Motor power HP2
Weight : 1600 kg
Overall dimensions : 3600 mm x 1200 mm x 2350 mm
CE Norm more
Canon ImagePRESS 1110
-with Stacker - 1.9 mill pressure
-Image compression server J100
Resolution 1200 x 1200 dpi printing
Color scan: Yes
Fax card: No
Speed: S / W 110 pages per minute
Max paper weight: 300 g / m ²
Min paper weight: 52 g / m ²
Paper format: DIN A4 - DIN SRA3
Scanning speed: 120 pages per minute
Touch display: Color
Maintenance contract by 12/2017
We are your strong and competent partner in sheet metal processing machines.
Especially the individual advice is one of our strengths.
For the realisation of your individual project of construction machinery we are competently and reliably available.
Technical data:-maximum working width: 3140 mm - bending performance: up to 0.8 mm (steel) - bending angle: Max 145 degree - bending beam thickness: 24 mm - the section with the Rollenchere over the entire working width - the lifting... more
To the scrap too bad? Register punch Krause, book cover round device with various radii gas-fired, wire stitching machine (tenderizer), Bomco punch + div. Tools, hot stamping press, horizontal wire stapler instead of sewn. Please enquire if you are interested.
Description Used bending press
Model AP 200 – 3100
2005 Conversion to ADCOBEND (complete replacement of all electronics)
Working hours Ca. 20.000 h with new control
Press power 2000 kN
Bending length 3100 mm
V10, Geissfuss mit R1,
tool length 3100 mm
Condition Machine is not connected on power
Compression of general residual waste
Stainless steel container mobile
Compressed air operated
Compression ratio 10: 1
stable and robust press
Bag size 870 mm high
Dimensions: 730 x 700 x 1850 mm more
Drilling machine Fabr ALZMETALL Type AB 3 ESV in very good condition.
Mach nr 15171
- Drilling capacity in steel 28 mm
- spindle taper MT 3
- throat 290 mm
- spindle speed variable 55 up to 1450 rpm.
- Table size 500 x 390 mm
- Column diameter 130 mm
- aut feeds 0.1-0.2-0.3mm / rev
- quill stroke 160 mm
- Weight 500 kg
ZGR-2140 T/0.8 incl. rolling scissors and hand folding machine
-Working length: 2140 mm
-Thickness - 0.8 mm,
-Bending angle up to 145 *.
-12 months of warranty
-Lift the upper cheek in three layers
-maximum 80 mm clear width between the cheeks
-Non-ferrous metal 30% more thickness
-Weight approx. 180 kg
-Beam 15 mm
-rear rack to hold of the sheet
-in the price incl. rolling scissors and hand hemming device
Delivery cost is 100 euros
Edge thickness 0.3-13 mm
Workpiece thickness 6-45 mm
Feed 8 + 16 m / min.
Edge feeder 1901 automatically
Pressure - 4 mill type 1914
End trimming unit with 2 blades
Flush trimming unit type 1942
1943 RADIUS trimming unit
Scraper unit 1927
Buffing unit 1944
UniPress grass for pot hinge drilling and injection is in good condition
Weight 95 kg
Year of manufacture approx. 1993
Attacks left and right
Mobile base operating instructions the machine is in good condition, ready to use.
Location: 54634 Bitburg's stock changes, errors, prior sale reserved.
Model: ZGR-3140/1.0 with accessories
Year: 2017 technical data:-maximum working width: 3140 mm - bending performance: up to 1.0 mm (steel) - bending angle: Max 145 degree - bending beam thickness: 20 mm - the section with the Rollenchere over the entire working width - the lifting of the upper bar in three positions - throat opening: 80 mm - degree Scala - angle stop - depth stops - weight: ca. 600 kg - the rolling scissors (maximum cutting performance up to 0.8 mm / steel) and manual folding... more
Bending tool, template, top blade, punch, upper beam br / br / -tool comes from a folding machine Fasti Type 211-32-2.5 br / handover in current condition as seen br / br -partially damaged / -Spitzes tool br / -Dimensions 75 x 13 mm br / length 3245 mm br / weight 24 kg
PAKAGE: (DIE-CUT & LETTERPRINT)
1 x ALBERT FRENKENTHAL LETTERPRESS / DIE CUTTING 570 x 800 mm
2 x ADAST GRAFOPRESS GPA, #22085, 22086, 1972, 26 x 38 cm
3 TOP used Machines from first owner with doc. , in working cond. complete with lot of tools, spare parts, equipment, manual. more
Well-kept folding machine state bending length about 2 m 2 thickness steel - ca 3 mm aluminium is machine electron via footswitch and bending operated mechanically on request matching plate shear and many more electric, mechanical hydraulic machines on stock
Edge glue machines wood here express 1437
Second-hand machine, fully functional!
Thickness 6-45 mm, edge thickness 0.3-13 mm, feed 13 m / min, pressure zone type in 1904 with 4 wheels,.
End trimming unit type type 1976 with 2 x 0,3 kW, milling unit 1943 with 2 x 0,6 kW, RADIUS scraping unit type in 1927.
Buffing unit, built in 1994
Location: Camp 54634 Bitburg
The satisfaction of our customers is our top priority.
Qualitative and reliable work characterize us and are the rule for us.
maximum working width: 3640 mm bending capacity: 0.8 mm (steel) bending angle: 145 degree beam: 24 mm the rolling scissors over the whole working width lifting of the upper bar in three positions
Opening: 80 mm front and depth stops angle stop
Gas pressure spring degree Scala
Weight: approx. 850 kg the rolling scissors NK 0,8 has the maximum cuttin... more
Bending tool, template, top blade, punch, upper beam br / br / -tool comes from a folding machine Fasti Type 211-32-2.5 br / handover in current condition as seen br / br -partially damaged / -Spitzes tool br / -Dimensions 75 x 15 mm br / length 3041 mm br / weight 23 kg
Grundplattengetriebe-3 spindle table dimension B-730 mm T-450 mm travel in depth 170 mm material thickness 15-40 mm 13 mm drilling depth Max Bohrenutzlaenge 20 mm shank diameter of the drill bit 10 mm compressed air 6 bar insertion force at 6 bar pressure approx. 280 kg 1, 1kW motor power weight 125 kg
Complete with Base cabinet and attacks
2 different fittings heads grass and Hettich
Location: Off the shelf 54634 Bitburg
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.