Used Manual Screw Press for sale (41,266)

Condition: good (used), Screw bookbinding press Mahez 50×40 Manufacturer Mahez, Amsterdam, Netherlands. The device is fully functional, ready to work. Format 500×400 mm Pressure 2t Iajlhccjwud Syeqnjw Weight 150kg

Condition: good (used), Large screw bookbinding press 50x56cm The device is fully functional, ready to work. Manufactured by Hugo Peege, Leipzig, Germany. The press has a tapping block that increases the pressing force. Pressure 5t Iaelhccqjwud Sgjnsw Plate dimensions 500x560mm

Condition: good (used), Bookbinding screw press 50×40 on a base The device is fully functional, ready to work. Iaslhccqswud Sajnjw Format 500×400 mm Pressure 5t

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Iajlhcov Td Erscqnsw

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm Ielhccsvuud Usqneaw no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm ram surface 630 x 630 mm spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: like new (used), Functionality: fully functional, Press force 25 ton Clearance between guides 510 mm Table size W x D approx. 510 x 400 mm Plunger, W x D approx. 430 x 200 mm Hole through the table 90 mm Installation height max. / min. 380 / 180 mm Ielhcewu Tcnocqneaw Plunger stroke 200 mm

Condition: used, Year of construction: 1980, Functionality: fully functional, Spindle press by Hiller & Lutz Year of manufacture: 1980 Iaolhcowxyn Ejcqnjw Fully functional In good used condition

Condition: used, Year of construction: 1977, Functionality: fully functional, total height: 5,560 mm, table width: 775 mm, table length: 875 mm, pressing force: 400 t, outer dimension width: 1,760 mm, outer dimension length: 4,424 mm, working stroke: 450 mm, net weight: 30,000 kg, Operational, complete screw press with the following technical specifications: STANKO F1736 forging screw press Year of manufacture: 1977 Press force: 400 Mp Stroke: 450 mm Iajlhccqjww A Edenow Number of strokes per minute: 30 Table dimensions (L x W): 875 x 775 mm Power: 63 kW Machine dimensions (D x W x H): 1790 x 4425 x 5560 mm above floor level Weight: 30,000 kg Technical condition: good, the press is operational and complete Currently, the press is disconnected and prepared for sale.

Condition: used, Year of construction: 1970, pressure 100 t Iaelewp Tt Nehccqnjw Stroke 400 mm table surface area 650 mm weight 6 t

Condition: used, Year of construction: 1973, column spindle press Iaslhccqewtnigjnsw

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m Iaolhsvuk N Teccqnjw only permitted for hot forming work high speed friction screw press with motor, friction screw drive as is where is, WITHOUT putting into operation

Condition: good (used), Year of construction: 1963, stroke = 250 mm Iaelswl Dddshccqnew

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, lifting speed: 25/min, ram stroke: 230mm, power requirement: 5.5kW, safety distance: 640mm, stopping time: 400ms, weight: 4600kg. Has been overhauled once. Islhstk Nx Eeccqnjaw

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Ielhccswiwqfeqnsaw

Condition: excellent (used), Year of construction: 1963, Functionality: fully functional, pressing force: 28 t, manual spindle press 28 tons in very good condition Ijlequqpaohccqnoaw

Condition: good (used), RAS screw press - Width: 80 cm - Depth: 60 cm - Height: 150 cm - Weight: approx. 250 kg Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Iaelhcstku Ekecqnjw Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 150 359 - 11683, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email! Iaeljt Ucpbohccqnjw

Condition: ready for operation (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 7412, power: 15 kW (20.39 HP), Presto SPS15 - Screw press Refurbished in 2019 Iolhcswcd Htscqnsaw Used for cardboard Complete set including container, aggregate and hopper Automatic grease lubrication

Year of construction: 1974, Condition: used, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base Iaelsigwdwshccqnsw -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Iaslswiwpuehccqnsw

Year of construction: 1964, Condition: used, pressure 7 t Iaolheqy Rn Tjccqnsw weight 0,9 t 1417

Year of construction: 2006, Condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Iaslhccqsd D Ryfonsw with various punching tools

Condition: ready for operation (used), Year of construction: 1962, Functionality: fully functional, Used Weingarten P 100 screw press Pressing force: 80t Table: 350 x 400 mm Stroke: 80 - 250 mm Islevuqlbehccqneaw Stroke rate: 45 min-1 Installation space: 400 mm

Condition: excellent (used), machine/vehicle number: 2421, Hand spindle press fully functional Iaolewaq H Ujhccqnow

Condition: good (used), Year of construction: 2011, Functionality: fully functional, We have a PRESTO SP11 screw press (11kW) for sale. The machine is in good working order with a new coat of paint. With a pressure cap. Ielhccqsv T Uzweneaw 2 pieces available in stock (Price is for one piece).