Used manual spindle presses for sale (15)

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Bledjz Hlplepfx Amgop

Condition: ready for operation (used), Mechanical spindle press / four-column press - Four-column press - Pressing force approx. 40 tons Dimensions: L x W x H 1.5 x 1.5 x 2.0 meters / Weight 1000 kg Bsdpfx Aezta Tuemgslp Errors and omissions excepted.

Condition: ready for operation (used), Four-column press SP60/670 - Achtermann & Co. Stuttgart - Pressing force: 60 tons - Distance between columns: 670 mm - Distance between columns / laterally: 400 mm - Table size: 900 x 750 mm - Vertical clearance: 520 mm - 6 x T-slots in the upper platen Bledpfszcxhwjx Amgop - 6 x T-slots in the table Dimensions: L x W x H 2 x 1.5 x 2 meters / Weight 3000 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 1974, Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: NEHER, manual spindle press type SPPG-40/100 Bledpoypvtksfx Amgjp -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm -Dimensions: 1800/1800/H2400 mm -Weight: 1940 kg

Condition: ready for operation (used), Year of construction: 1984, Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible. Blsdpfxsxl Elye Amgjp

Condition: used, Manual Press KLOPFER Bodpfx Amoz Iz Rzegolp Maxi travel: 400 mm Throat depth: 220 mm Thrust shaft diameter: Ø 50 mm Ideal for all types of shafts extraction, fitting works, etc. Width: 500 mm Depth: 500 mm Total height: 1000 mm Weight: approx 100 kg

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm Bsdpjigwdwofx Amgolp -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press from Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition. Price reduced!!!!! Technical data on Gemini-Google: The Hiller & Lutz HP71 is a classic, robust manual spindle press (often also referred to as a piercing press), which is primarily used in locksmith shops, workshops, and the metalworking industry for tasks such as straightening, bending, pressing, or punching. Here are the common technical specifications for this model: Technical details (approximate values) Since these machines were manufactured over decades, details may vary slightly depending on the year of manufacture: Pressing force: approx. 20 to 25 tons (The designation "71" often refers to the size/frame width; the force results from the spindle pitch and the flywheel diameter). Spindle diameter: approx. 70 – 80 mm Stroke: approx. 200 – 300 mm (depending on the spindle length) Blodpfswxyn Ejx Amgjp Overhang: approx. 250 – 300 mm (distance from the center of the spindle to the stand) Table area: approx. 500 x 400 mm Through-height: max. approx. 400 – 500 mm (with the spindle rotated upwards) Flywheel diameter: approx. 1,000 – 1,200 mm Machine features Construction: Solid cast iron frame in C-shape for high rigidity. Drive: Manual, via the large flywheel; the energy is generated by the inertia of the wheel when the spindle is screwed down. Table: Usually equipped with a central through-hole and T-slots for tool attachment. Weight: The weight typically ranges between 700 kg and 950 kg, which guarantees a stable position (usually requiring bolted mounting to the foundation). Gemini says The dimensions of the Hiller & Lutz HP71 depend heavily on whether you are considering only the body or the total space required, including the flywheel overhang. Here are the specific dimensions for this model: Machine base dimensions (body) Height: approx. 1,800 mm to 2,100 mm (depending on the spindle position). Width (stand): approx. 500 – 600 mm. Depth (foot): approx. 800 – 1,000 mm.

Condition: ready for operation (used), Manual spindle press / 25 tons -Clearance between columns: 400mm -Spindle diameter: 80mm -Vertical clearance: 420mm -Various clamping jaws Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight: 700kg Blodpfxozcxdle Amgep Errors and omissions excepted.

Condition: used, Year of construction: 1971, pressure capacity max. 80 t Stroke 500 mm table surface area 960 x 810 mm spindle pitch 72 daylight between the columns 950 / 540 mm passage 640 mm machine weight ab. 4500 kg dimensions of the machine ca. 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves Bedevxwzkepfx Amgjlp different support frames

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm Blsdjv Svc Tspfx Amgep dayligth 380 mm stroke 260 mm weight of the machine ca. ca. 750 kg

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm -Intermediate dimension: 200 mm Bljdpfx Amsz Egh Tegep -Dimensions: 1020/600/H1520 mm -Weight: 120 kg

Condition: good (used), Hand-operated spindle press, homemade, from a training center Blsdpfx Ajzcqmlsmgep Pressing force: approx. 5-10 tons Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Bledpfxev Td Erj Amgep

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. Bjdpfx Ametty Nksgslp -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW