Used eccentric presses single column 25-54t for sale (83)

Condition: used, Year of construction: 1969, pressure 050 t Dsdpfx Asvzxr Negcscr throat 260 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 410 mm table surface area 650 x 500 mm hole in the table 250 x 180 mm table height over floor 740 - 980 mm table adjustable 240 mm ram surface 400 x 180 mm ram adjustment 70 mm power requirement 2,2 kW weight 2,3 t dimensions (WxDxH) 1,2 x 1,4 x 2,3 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm Dcedpjb U Hwmofx Agcer ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: good (used), Year of construction: 1999, 1 used eccentric press, Ambold make Model: PEEV 40/2 Press force: 40 t Throat depth: 225 mm Stroke: 8 – 84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram area: 185 x 180 mm Dcedpfxjxvqlto Agcer Ram bore: 40 mm Drop-through opening in table: 210 x 170 mm Clamping plate: 570 x 450 mm Total power requirement: 3.5 kW Machine weight: approx. 2.7 t Dimensions (LxWxH): approx. 1.4 x 1.1 x 2.1 m

Condition: good (used), pressing force: 25 t, – Capacity 25 tons – Table 360 x 350 mm – Foot control – 380V Dcodpoxc N Tcjfx Agcer

Condition: used, Russian manufacturing, Max. pressing force: 25 t Dedjxbf Sfopfx Agcecr Table size: 550 x 400 mm

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Djdpfetx E N Tsx Agcjcr Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: used, Year of construction: 1977, pressure 050 t throat 255 mm stroke 8 - 120 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 640 x 500 mm hole in the table 250 x 180 mm table height over floor 710 - 930 mm table adjustable 220 mm ram surface 550 x 170 mm ram adjustment 70 mm Djdpfxsvzxr Ae Agcecr power requirement 4,0 kW weight 3,1 t dimensions (WxDxH) 1,5 x 1,5 x 2,3 m year of manufacture 1951 - modernized 1977 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min Dcsdjb U Hwpopfx Agcjr ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: good (used), Brand: WMW Model series: Ruckmarsdorf / Biberitz Manufacturer: VEB Maschinen- und Anlagenbau Country of origin: GDR (former East Germany) Total weight: 2,700 kg Power type / Frequency: 3 PEN – 50 Hz Mains voltage: 380 V Control voltage: 110 V Power: 3.0 kW Rated current: 12.5 / 7.2 A Technical specifications: Djdpfx Agjxw Nncscscr Pressing force: 400 kN Torque: 6080 Nm Shearing area: 1000 mm² (at Ta = 392 MPa) Single stroke working energy: 3530 J Continuous working energy: 1765 J Stroke: 8 – 84 mm Tool installation height: 308 mm Ram adjustment: 55 mm Strokes per minute: 130 Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The displayed price includes VAT (VAT not deductible for businesses).

Condition: good (used), Year of construction: 1979, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Dedpsxr Azxjfx Agcecr Video about functionality available

Condition: used, Year of construction: 1968, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 115 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 645 x 510 mm hole in the table 250 x 180 mm table height over floor 700 - 930 mm table adjustable 230 mm ram surface 220 x 185 mm ram adjustment 70 mm power requirement 3,0 kW Dodpfx Agevzxriscjcr weight 3,0 t dimensions (WxDxH) 1,1 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Year of construction: 1977, condition: used, pressure 40 t throat - mm stroke 8 - 90 mm table size 630 x 430 mm ram adjustment 60 mm no. of strokes max. 65 Hub/min total power requirement kW weight of the machine ca. 2480 kg dimensions of the machine ca. m Djdpfx Asb U Hxfjgcocr - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch

Condition: good (used), Machine data: Make / Model: Ter Hart Eccentric Press THEP25 Machine number: 99302 Press capacity: 250 kN Number of strokes: 140 strokes/minute Adjustable stroke: 6 – 60 mm Adjustable ram: 35 mm Cutting capacity (at 400 N/mm²): 625 mm² Year of manufacture: 1999 Motor power: 1.5 kW Supply voltage: 3 x 400V / N / PE Operating air pressure: min. 0.55 MPa – max. 0.65 MPa Dedpfxjxw Nm Es Agcjcr Weight: 700 kg Origin: Riva B.V., Epe – Netherlands Included: CE marking Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min Dcjdpfx Aovuudnogcsr distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: excellent (used), pressure 50 t Dcodpfx Astrhf Asgcjr throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: used, Year of construction: 1978, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 650 x 515 mm hole in the table 115 mm Dcjdpfx Agsvut E Docjr table height over floor 790 - 1020 mm table adjustable 230 mm ram surface 390 x 180 mm ram adjustment 70 mm power requirement 2,0 kW weight 2,6 t dimensions (WxDxH) 1,1 x 1,4 x 2,2 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1983, pressure 63 t throat 315 mm stroke 10 - 105 mm Dcodpjumm S Dofx Agcsr no. of strokes 71 - 140 Hub/min ram adjustment 70 mm table size 800 x 620 mm ram head dimension 450 x 280 mm total power requirement kW weight of the machine ca. 5850 kg dimensions of the machine ca. 1,425 x 1,79 x 2,55 m

Condition: used, Year of construction: 1987, pressure 25 t Dcodpfx Aeu Dn Sbogcer throat mm stroke mm table surface area 500 x 340 mm hole in the table 250 x 210 mm ram surface 345 x 230 mm column daylight 250 mm mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: new, pressure 25 t throat 200 mm Dodpfsb U Hwnjx Agcjcr stroke 4 - 80 mm table-size 520 x 400 mm no. of strokes 160 Hub/min work capacity during endurance run 1370 Nm force 2740 Einzelhub adjustment of stroke 4 - 80 mm ram adjustment 40 mm ram surface 160 x 160 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm hole in the table 80 mm weight of the machine ca. 1,9 t

Condition: used, Year of construction: 1986, pressure 40 t throat 265 mm stroke 8 - 95 mm table size 660 x 520 mm Djdpfx Aeumm Sqjgcocr ram head dimension 400 x250 mm ram adjustment 80 mm no. of strokes 70 - 142 Hub/min total power requirement kW weight of the machine ca. 4500 kg dimensions of the machine ca. 1,245 x 1,585 x 2,37 m

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Dsdpsb U Hwtjfx Agcocr Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: used, pressure 25 t Djdpfx Ajxu Nqlegcjcr throat 200 mm stroke 4 - 80 mm no. of strokes 150 Hub/min ram adjustment 85 mm distance table/ram 300 mm table surface area 600 x 410 mm hole in the table 210 mm tool shank hole (depth x diameter) 80 x 40 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t

Condition: used, Year of construction: 1983, pressure 25 t throat 225 mm stroke 8 - 85 mm table size 560 x 450 mm ram head dimension 360 x 220 mm ram adjustment 55 mm no. of strokes 80 - 160 Hub/min total power requirement kW weight of the machine ca. 2500 kg Dedpfx Asumm Swsgcscr dimensions of the machine ca. 1,135 x 1,365 x 2,145 m

Condition: used, pressure 40 t throat 225 mm stroke 8 - 84 mm table surface area 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 mm hole in the table 210 x 170 mm clamping plate 570 x 450 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m Dsdpewxfmtjfx Agcscr

Condition: used, Year of construction: 2007, pressure 125 t stroke 12 - 140 mm daylight, max. stroke above - ram adjustment above 495 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm total power requirement 70 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated multi-disc wet multi-plate clutch and spring-loaded safety brake - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized ram height adjustment - Semi-automatic stroke adjustment - Ram weight compensation - Manual TDC correction - Belt drive Djdpfxjxx A Dto Agcscr - Press force measuring device - hanging control panel - reverse switch (return) - electric stroke counter - electric preselection counter - electronic cam switch - clamping plate - two-hand control panel, swiveling, height-adjustable - Operating hours counter - 1 set of swing elements - with feed The press is technically inspected at our premises and undergoes a current safety inspection.