Eccentric presses single column 55-99t for sale
Identified location: Ashburn (US) (Edit)
|
Pressure:63 t
throat:400 mm
stroke:16 - 90 mm
no. of strokes:60 /min
distance table/ram, max. stroke up, adjustment up:350 mm
table surface area:1000 x 750 mm
hole in the table:260 x 140 mm
table height over floor:710 mm
ram surface:600 x 220 mm
ram adjustment:50 mm
weight:4,3 t
dimensions (WxDxH):1,1 x 2,6 x 2,4 m
Bfdyaxv3ny
German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1
clutch:pneumatisch
overload protection in ram:mechanisch
ram counterbalance:pneumatisch more
|
|
4
pressure 080 t
throat 280 mm
stroke 8 - 100 mm
table-size 710 x 500 mm
no. of strokes 65 Hub/min
max. distance table - ram 300 mm
hole in the table 200 mm
7yviot72s
ram surface 430 x 280 mm
ram drills x depth 50 x 80 mm
ram adjustment 63 mm
total power requirement 8 kW
weight of the machine ca. 4 t
Dimensions (L/W/H) 1,6 x 1,5 x 2,6 m
Machine was checked each year by Schuler Service. more
|
|
2
pressure: 90 t
throat: 320 mm
no. of strokes: 90 Hub/min
daylight dimension : table/slide up: ca. 380 mm
ram adjustment: max. 65 mm
ram surface area: 600x55 mm
clamping plate on table: 800x640x80 mm
passage: 260x160 mm
adjustment of stroke: 60 fest/fixed mm
total power requirement: 5,5 kW
weight of the machine approx.: 4500 kg
space requirement approx.:: L:1,8xB:0,82xH:2,42 m
- single / continous stroke
- manual not available
- normal maintennance has been executed, overhauled 2010
Iwdyugf
- a... more
|
|
4
.
Bg8jxxwja7
Output 63 to
Stroke rate approx. 140 /min
Throat 450 mm
ram stroke 8-100 mm
Tappet adjustment 63 mm
Table , WxD approx. 700 x 780 mm
Plunger , W x D approx. 450 x 280 mm
Tenon hole 40 mm
Installation height approx. 320 mm (measured with mounted clamping plate)
width x depth approx. 1.25 x 1.7 m
Height approx. 2.55 m
Engine power 5 kW
Weight approx. 4 to
.
new UVV tested, with test book
.
More according to offer !
..... more
|
|
3
PRESS DESIGN
Bgnuo7xjtr
.. drive system eccentric / cran
PRESS FORCES
.. total force (nominal) 80 to
PRESS TABLE
.. table surface (left-right) 900 mm
.. table surface (front-back) 620 mm
.. opening in bed (diameter) 220 mm
SLIDE
.. table surface (left-right) 500 mm
.. table surface (front-back) 240 mm
.. stroke rate (max.) 55 /min
SLIDE (MECHAN. PRESS)
.. stroke min. 10 mm
.. stroke max. 160 mm
.. stroke rate (min.) 55 /min
.. main drive power 7.5 kW
TOOL ASSEMBLY DIMENSIONS
.. distance between... more
|
|
6
Capacity: 63 ton
Gfwz2bh
Throat: 250 mm
Ram stroke: 8 - 100 mm
Ram adjustment: 63 mm
Shut height (stroke down, adjustment up): 230 mm
Additional table plate thickness: 85 mm
Table surface area : 700 x 490 mm
Ram surface area: 450 x 280 mm
Distance between the columns: 320 mm
Number of strokes: 56 / 84 [...]
Weight of machine approx.: 5 ton more
|
|
2
pressure:80 t
throat:300 mm
stroke:7 - 100 mm
no. of strokes:120 /min
distance table/ram, max. stroke up, adjustment up:450 mm
table surface area:720 x 600 mm
hole in the table:300 x 120 mm
Bfdydnqpcb
table height over floor:850 mm
ram surface:400 x 275 mm
ram adjustment:60 mm
power requirement:5,5 kW
weight:6,5 t
dimensions (WxDxH):1,2 x 2,0 x 2,9 m
German Safety: permitted for manual loading:CE-sign
light guard:Sick
clutch:hydraulic
overload protection in ram:hydraulic
ram adjustment:motor... more
|
|
13
- Manufacturing number: 2026
- Delivery year: 1981
- Press pressure: 63 t
Kdf7gh3
- table dimensions: 700 x 480 mm
Technical details
Weight approx.: 6.000 kg
Dimensions (LxWxH) approx.: 1,500 x 1,300 x 3,000 mm more
|
|
2
pressure 63 t
throat 500 mm
I3ekywb
stroke 10-90 mm
no. of strokes 70 Hub/min
ram - range of adjustment 55 mm
ram surface 600x270 mm
table surface area 1000x1000 mm
hole in the table 270x150 mm
weight of the machine ca. 6.5 t
dimensions of the machine ca. 1300x2500x2500 mm more
|
|
6
compressive force 63 tons
outreach 315 mm
ram stroke 8 to 120 mm
number of strokes 80 / min
ram adjustment 70 mm
distance between table and ram max. 417 mm
ram surface 490 x 400 mm
table surface 800 x 620 mm
Ftz80gt
outlet in the table 280 mm
table height 730 mm
T-slots width 22 mm
two-hand operation with foot switch
electrical data 380V / 5KW
space requirements width - 1,150 x depth - 1,700 x height -
2,600 mm
weight approx. 5,900 kg
more
|
|
5
PRESS DESIGN
.. drive system eccentric / cran
.. number of suspensions 1
.. feedstock transport direction left to right
PRESS FORCES
.. total force (nominal) 60 to
PRESS TABLE
.. table surface (left-right) 800 mm
.. table surface (front-back) 450 mm
.. thickness of bolster plate 100 mm
SLIDE (MECHAN. PRESS)
.. slide adjustment 70 mm
.. stroke adjustment yes
.. stroke min. 10 mm
.. stroke max. 100 mm
Cbpofdape
ATTACHMENTS (PRESSES)
.. decoiler yes
.. leveller unit yes
.. feeder type grip f... more
|
|
1
Capacity: 80 ton
Throat: 280 mm
Ram stroke: 20 - 160 mm
Ram adjustment: 72 mm
Shut height (stroke down, adjustment up): 325 / 240 mm
Additional table plate thickness: 85 mm
Table surface area : 1.200 x 560 mm
Ram surface area: 700 x 355 mm
Distance between the columns: 320 mm
Tool Clamping Hole Ram: 40 / 80 mm
Number of strokes: 125 [...]
Weight of machine approx.: 4,4 ton
No8k9 more
|
|
2
Pressure:63 t
throat:250 mm
stroke:10 - 100 mm
no. of strokes:120 /min
distance table/ram, max. stroke up, adjustment up:380 mm
table surface area:700 x 500 mm
hole in the table:180 x 140 mm
table height over floor:700 mm
ram surface:360 x 275 mm
ram adjustment:60 mm
power requirement:5,5 kW
weight:3,8 t
German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1
clutch-/ brake combination:hydraulic
Ihosnv30k
overload protection in ram:mechanical more
|
|
1
new
Force 63 to
Table 750 x 500 mm
Delivery time approx. 12 weeks from order placement
Pressing force: 63 to
Table: 750 x 500 mm
Clutch: Plates
Activation: pneumatically
Stroke: 4-102 mm
Stroke rate: 54 H / min
Be9k7c79ui
Motor: 7,5 kW
Distance from table slide: Max 350 mm
Aufspannzapfendurchm.: 50 mm
Throat depth: 270 mm
Tappet surface: 490 x 325 mm
Hole in the table: 170 mm
Clearance in the frame: 440 mm
Length: 1.850 mm
Width: 1100 mm
Height: 2,370 mm
Weight: 4,100 kg
8 slide guide front hedging ... more
|
|
1
pressure 63 t
throat 280 mm
stroke 8-100 mm
ram surface 310x260 mm
table surface area 620x500 mm
hole in the table Ø 250 mm
no. of strokes 56/84 Hub/min
ram - range of adjustment 63 mm
weight of the machine ca. 4,0 t
Bxjf7wbq
dimensions of the machine ca. 1200x1900x2800 m more
|
|
1
new
pressure: 60throat depth: 260stroke: 0-100total power requirements: 5,5weight approx.: 3500messurements (LxWxH): 1150 x 1350 x 2050
Ewavpgx more
|
|
6
PRESS DESIGN
.. drive system eccentric / cran
PRESS FORCES
.. total force (nominal) 63 to
PRESS TABLE
.. table surface (left-right) 710 mm
.. table surface (front-back) 500 mm
.. thickness of bolster plate 85 mm
SLIDE
.. table surface (left-right) 450 mm
.. table surface (front-back) 280 mm
SLIDE (MECHAN. PRESS)
.. slide adjustment 63 mm
Hizg7s2d
.. stroke min. 30 mm
.. stroke max. 140 mm
.. variable speed yes
.. stroke rate (max.) 125 /min
TOOL ASSEMBLY DIMENSIONS
.. shut height (stroke down,... more
|
|
4
pressure unbekannt t
Beoej8t93y
throat unbekannt mm
stroke unbekannt mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m more
|
|
2
Pressure:80 t
throat:280 mm
stroke:20 - 120 mm
no. of strokes:42 - 125 /min
distance table/ram, max. stroke up, adjustment up:510 mm
table surface area:700 x 560 mm
hole in the table:280 mm
table height over floor:800 mm
Ba0ufo9sss
passage to the back:320 mm
ram surface:560 x 350 mm
ram adjustment:72 mm
Weight:5,2 t
Dimensions (WxDxH):1,6 x 1,6 x 2,6 m
German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1
clutch:pneumatic
overload protection in ram:mechanical more
|
|
12
Force 63tons
Throat 250mm
Daylight 380mm
Table size 650x550mm
Ram size 360x275mm
Stroke 10-100mm
Strokes per minute 70
Cstb7ux3u
requested power 4KW
Weight 5000Kg
Height 2130mm
width 900mm
depth 1700mm
hydraulic clutch more
|
|
2
pressure 80 t
throat 300 mm
stroke 8-112 mm
table surface area 700x550 mm
Ben3gmd2vr
ram surface 390x300 mm
hole in the table Ø 260 mm
weight of the machine ca. 7 t
dimensions of the machine ca. 1500x1900x2800 m more
|
|
3
pressure:80 t
stroke:50 mm
Table area:875 x 695 mm
ram surface:350 x 355 mm
distance between columns:450 mm
ram adjustment:71 mm
no. of strokes:30 - 90 Hub/min
distance between table and ram (stroke down, adjustment up):480 mm
weight of the machine ca.:6,2 t
dimensions of the machine ca.:2,0 x 2,1 x 3,2 m
Djjyeiz more
|
|
5
pressure: 80 t
slide stroke: 30 - 120 mm
throat: 300 mm
ram adjustment: 100 mm
no. of strokes: 40 - 130 Hub/min
dayligth: 400 ohne Aufspannplatte mm
Table dimensions: 1200 x 600 x 70 mm
passage opening in table: Ø 180 mm
surface area of ram: 600 x 450 mm
control for program: SPS S7-300 mit PROFIBUS Siemens
Ize7upp
control: PILZ SPS PSS 3075/3 zur Absicherung
table height over floor: mm
total power requirement: ca. 7,5 + 2,2 kW
weight of the machine ca.: 7,5 + 0,8 + 0,55 t
dimensions electric cab... more
|
|
4
pressure unbekannt t
throat unbekannt mm
stroke unbekannt mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Beoekiffqz more
|
|
Pressure:80 t
throat:345 mm
stroke:20 - 160 mm
no. of strokes:65 /min
distance table/ram, max. stroke up, adjustment up:495 mm
table surface area:920 x 610 mm
table height over floor:800 mm
Hole in the table:280 mm
passage to the back:670 mm
ram surface:650 x 400 mm
ram adjustment:50 mm
Sapt2g8
power capacity:10,0 kW
weight:7,7 t
Dimensions (WxDxH):1,5 x 2,2 x 3,15 m
German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1
overload protection in ram:hydraulic
ram adjustment:motoric more
|
|
4
pressure 63 t
stroke 8 - 125 mm
Beoinczlkq
throat 280 mm
ram - range of adjustment 80 mm
strokes per minute 63
table: 280 x 450 mm
weight 3,5 t more
|
|
2
pressure 100 t
throat 410 mm
stroke 8-112 mm
no. of strokes 55/82 Hub/min
ram - range of adjustment 80 mm
table surface area 950x700 mm
ram surface 700x450 mm
hole in the table Ø 280 mm
table height 800 mm
total power requirement 11 kW
weight of the machine ca. 7,5 t
Ben3d90ovj
dimensions of the machine ca. BxTxH 1600x2200x3000 m more
|
|
3
pressure:63 t
throat:315 mm
stroke:8 - 120 mm
Strokes in endurance, stand.:80 min-1
Mx9a9
ram adjustment:70 mm
greatest distance between table & ram:417 mm
table surface area:800 x 620 mm
ram surface:490 x 400 mm
table height:730 mm
column daylight:320 mm
total power requirement:5 kW
weight of the machine ca.:5,5 t
dimensions of the machine ca.:1,15 x 1,7 x 2,6 m more
|
|
4
Very high quality eccentric press with gear reduction.
Brand new - immediately available - subject to prior sale
Nominal press force 800 kN
Table size 580 x 900 mm
Yziif8dx
Plunger size 380 x 560 mm
Largest installation height 480 mm
Stroke adjustment range 14 to 150 mm
Drive power 5,5 kW
Weight 5.600 kg
Dimensions 1.61 x 1.54 m x H 2.93 m / Transport height 2.74 m
Equipment:
- SIEMENS® PLC - control with touch screen
- PILZ® safety control
- Central lubrication device
- Hydraulic overload prote... more
|
|
10
Manufacturer: Ludwig WIDANI Nuremberg
Year of construction: 1955
Machine number: 971 055
Type: 60 AMP
Bezdeyd
Press force: 60 t
table: 750 x 520 mm
Plunger: 240 x 200 mm
Through-hole: 300 x 170 mm
Throat: 220 mm
Distance table - ram: 350 mm
Material thickness max.: 4 mm
stroke rate: 65/min
ram adjustment: 10 to 90 mm
condition: good
Equipment: protective screen black (retrofitted), foot release
Connection: 3 kW
Weight: approx. 3.5 t
Dimensions: 1.300 x 1.800 x 2.100 mm more
|
|
3
pressure:63 t
C3nwct0e
throat:250 mm
stroke:8 - 100 mm
Stroke rate:47 - 140 / min
Distance table/ram, max. stroke up, adjustment up:415 mm
Table surface area:710 x 480 mm
Hole in the table:280 / 250 mm
Table height above floor:800 mm
Passage to the back:290 mm
Ram surface:450 x 280 mm
Ram adjustment:63 mm
Weight:4,0 t
Dimensions (WxDxH):1,5 x 1,6 x 2,7 m
German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1
infinitely variable drive:PIV
clutch:pneumatic
overload protection in ra... more
|
|
pressure: 100 t
stroke: 20-140 manuell einstellb./manual adjustable mm
no. of strokes: Dauerlauf 70 Hub/min
table:: 900x700x120
table height over floor: 800 mm
2plzem
throat: 360 mm
distance between columns: 400 mm
ram stroke-adjustment: 80 motorisch
clamping plate on table: 1260x760x110 mm
biggest distance between table & ram: 470 mm
tool shank hole: 180 mm
total power requirement: 10,5 kW
weight of the machine ca.: ca. 8,5 t
space requirement approx.:: L:2,1xB:1,6xH:3,0 m
Manual and/or foot co... more
|
|
1
pressure 63 t
throat 280 mm
stroke 8-100 mm
Ben3bj93ba
no. of strokes 56/84 Hub/min
ram - range of adjustment 63 mm
table surface area 620x500 mm
ram surface 310x260 mm
hole in the table Ø 250 mm
315 mm
weight of the machine ca. 4,0 t
dimensions of the machine ca. BxTxH 1200x1900x2800 mm more
|
|
3
pressure:60 t
throat:280 mm
stroke:5/100 mm
strokes per minute:54
ram adjustment:70 mm
ram head dimension:485 x 295 mm
Table dimensions:750 x 500 mm
hole in the table:180 mm
Taoboqscu
total power requirement:ca. 7,5 kW kW
weight of the machine ca.:ca. 4,93 t
dimensions of the machine ca.:2,8 x 1,55 x 1,52 m more
|
|
4
Very high quality eccentric press with gear reduction
Brand new - immediately available - subject to prior sale
Nominal press force 630 kN
Table size 500 x 800 mm
Csuoufdzk
Plunger size 380 x 560 mm
Largest installation height 450 mm
Stroke adjustment range 12 to 140 mm
Drive power 5,5 kW
Weight 5.100 kg
Dimensions 1.46 x 1.41 m x H 2.79 m / Transport height 2.64 m
Equipment:
- SIEMENS® PLC - control with touch screen
- PILZ® safety control
- Central lubrication device
- Hydraulic overload prote... more
|
|
10
Single column eccentric press make HEILBRONN type EP 75
fabr.# 3201, year of construction 1965
Technical data:
Compressive force 75 t
Projection 300 mm
Table size 720 x 600 mm
Durchfalloch in the table 320 x 200 mm
large distance between table and plunger 400 mm
ram surface 450 x 300 mm
Tappet adjustment 80 mm
Stroke adjustment 8 - 100 mm
Stkmvc
Number of strokes 90 /min.
Tappet bore 38 x 94 mm
Drive motor 380 V, 4 kW
Space requirement approx. 1250 x 1700 x 2500 mm
Weight approx. 3.8 t
with
- fo... more
|
|
pressure:75 t
throat:295 mm
stroke:16 - 140 mm
Stroke rate:75 / min
Distance table/ram, max. stroke up, adjustment up:450 mm
Table surface area:800 x 595 mm
Hole in the table:330 x 230 mm
Table height above floor:745 mm
Ram surface:470 x 180 mm
Ram adjustment:80 mm
Bhyi7tn
Power capacity:5,5 kW
Weight:5,0 t
Dimensions (WxDxH):1,5 x 2,5 x 2,5 m
German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1
clutch:pneumatic
overload protection in ram:mechanical more
|
|
1
pressure: 100 t
stroke: 20 fest mm
no. of strokes: 55 Hub/min
Dygmrpd
table surface area: 900x640 mm
throat: 355 mm
ram adjustment: 150 mm
mortise hole in ram: Ø 36 mm
clamping surface ram: 500x415 mm
height over floor: 800 mm
biggest distance between table & ram: 390 mm
passage opening in table: Ø 330mm mm
total power requirement: 11 kW
weight of the machine ca.: 7,5 t
dimension machine [...]: 1,47x1,58x2,57 m
transport dimensions LxWxH: 1,9x1,6x3,1 m
Press is without electric cabinet, optional... more
|
|
1
pressure 60 t
throat 280 mm
stroke 10-90 mm
no. of strokes 110 Hub/min
ram - range of adjustment 60 mm
table surface area 740x530 mm
Ben3baowm9
ram surface 380x200 mm
hole in the table 300x200 mm
table height 780 mm
tool hole in ram Ø 40 mm
weight of the machine ca. 3,8 t
dimensions of the machine ca. 1700x1800x2400 mm more
|
|
3
pressure:63 t
stroke:16-125 mm
Torque:1600 kpm
cutting surface:1600 mm²
C80pzdcsc
through-put sheet thickness:3,2 mm
force:250 kpm
distance table/ram:562 mm
adjustability of Ram:70 mm
Table dimensions:800 x 600 mm
table adjustment range:220 mm
Stroke -permanent runnig:80 min.-1
total power requirement:6 kW
weight of the machine ca.:5 t more
|
|
5
pressure 80 t
Dpjc0cn
stroke 6 - 99 mm
ram adjustment 800 mm
lower gears 70 /min
total power requirement 7,5 kW more
|
|
9
Single column eccentric press make HEILBRONN type REP 75
fabr.# 2652, year of construction 1962
Technical data:
Compressive force 75 t
Projection 300 mm
Table size 850 x 600 mm
Nsvqx
Durchfalloch in the table 320 x 100 mm
large distance between table and plunger 400 mm
Plunger surface 440 x 300 mm
Tappet adjustment 80 mm
Stroke adjustment 15 - 99 mm
Number of strokes 60 /min.
Drive motor 380 V, 4 kW
Space requirement approx. 1000 x 1800 x 2400 mm
Weight approx. 3.7 t
with
- foot control
- swingi... more
|
|
Pressure:80 t
throat:300 mm
stroke:8 - 140 mm
no. of strokes:60 / 90 /min
distance table/ram, max. stroke up, adjustment up:420 mm
table surface area:800 x 600 mm
hole in the table:330 x 230 mm
table adjustable:230 mm
table height over floor:750 - 980 mm
ram surface:600 x 240 mm
Nacm9
ram adjustment:100 mm
power capacity:4,5 / 6,9 kW
Weight:5,5 t
Dimensions (WxDxH):1,4 x 2,5 x 2,6 m
German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1
clutch-/ brake combination:hydraulic
overload... more
|
|
5
pressure: 100 t
stroke: 20 fest mm
no. of strokes: 55 Hub/min
throat: 355 mm
mortise hole in ram: Ø 36 mm
table surface area: 900x640 mm
ram adjustment: 150 mm
clamping surface ram: 500x415 mm
height over floor: 800 mm
biggest distance between table & ram: 390 mm
passage opening in table: Ø 330 mm
total power requirement: 11 kW
weight of the machine ca.: 7,5 t
dimension machine [...]: 1,46x1,58x2,57 m
Bjas32de
transport dimensions LxWxH: 1,9x1,6x3,1 m
Press is without electric cabinet, optional ... more
|
|
2
pressure 63 t
throat 275 mm
stroke 8-120 mm
no. of strokes 30-120 Hub/min
ram - range of adjustment 85 mm
hole in the table 220x100 mm
table surface area 750x540 mm
ram surface 400x260 mm
Ben3anmle7
table height 820 mm
tool hole in ram Ø 50 mm
total power requirement 7,7 kW
weight of the machine ca. 5 t
dimensions of the machine ca. BxTxH 1500x2000x2450 m more
|
|
4
pressure:80 t
throat:300 mm
stroke:8 - 140 mm
Babn8gd7bk
no. of strokes:60/120 Hub/min
ram adjustment:100 mm
day light (max. stroke down, ram adjustment on top) :485 mm
Mortise in ram (Ø x depth):50 x 80 mm
ram surface:600 x 280 mm
table surface area:900 x 620 mm
table height adjustment:240 mm
table height above floor:800 mm
hole in the table:325 x 225 mm
total power requirement:5,5 kW
weight of the machine ca.:7,8 t
dimensions of the machine ca.:1,55 x 2,3 x 2,56 m more
|
|
1
1963
ready for operation (used)
We sell 1 eccentric press Weingarten type ER 63, serial no.: 52A/61, pressing force 63 tons, T-slot clamping table approx. 600 x 500 mm, sheet thickness up to approx. 10 mm, number of strokes approx. 65/min., ram stroke approx. 8-100 mm, ram adjustment approx. 63 mm on behalf of the authorised persons.
An inspection can take place, after date arrangement, gladly.
Ccwi7kezo
Dismantling, loading and transport must be organised and carried out by the buyer! more
|
|
9
For sale is an eccentric press of the manufacturer EBU, type 75RWeight: 3650 KgWe will be happy to answer any questions you may have.
Jvd32i more
|
|
pressure:80 t
throat:360 mm
stroke:8 - 112 mm
no. of strokes:78 /min
distance table/ram, max. stroke up, adjustment up:467 mm
table surface area:900 x 650 mm
hole in the table:250 mm
table height over floor:800 mm
passage to the back:330 mm
ram surface:650 x 400 mm
ram adjustment:80 mm
Kjeotoq
power requirement:11,0 kW
dimensions (WxDxH):1,2 x 2,2 x 2,9 m
German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1
overload protection in ram:mechanisch more
|
|
1983
good (used)
Eccentric press FPA PMS 63 CP produced in 1983 by the Warsaw Fabryka Obrabiarek.
Press parameters:
- maximum pressure: 63 tons
- dimensions of the table top: 800 x 560 mm
- overhang, at table height: 280 mm
- adjustable stroke of the slider: 8-110 mm
- slider jumps: 65, 85, 110 strokes / min.
Glvok3d
- maximum number of clutch activations in intermittent traffic: 20 on / min.
- the largest distance between the slider and the table: 315 mm
- diameter of the hole in the table: 250/280 mm
- slider... more
|
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
New Machineseeker.com TV commercial with Michael van Gerwen
Sell now on Machineseeker! Over 160,000 inquiries per month
10 valuable tricks for buying used machines online
Sponsorship of Michael van Gerwen and TV advertising
Sample sales contract for used machines in nine languages
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Presses
Dealer for Presses
