Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,504 h, Functionality: fully functional, machine/vehicle number: 23140000264, total height: 3,000 mm, total length: 4,000 mm, total width: 3,500 mm, TECHNICAL DETAILS Control: CNC MACHINE DETAILS Net weight: 12,500 kg Dimensions: 400 cm x 350 cm x 300 cm Serial number: 23140000264 Operating hours: 11,504 hours Hfelhcewpi Hrjdwxeh EQUIPMENT - Documentation - CE marking

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: VM43182E, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel distances x-axis: 560 mm y-axis: 450 mm z-axis: 450 mm Table Table surface: 760 x 410 mm Hfslowm I N Tohcdwxoh Spindle Speed range: 8,000 rpm Dimensions Dimensions: 2.16 x 2.32 x 2.37 m

Condition: ready for operation (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 6675 1727 J, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, TECHNICAL DETAILS Travel paths x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm Hfslhcswm I Nyjdwxoh General information Machine weight: approx. 8 t

Condition: excellent (used), Year of construction: 2019, operating hours: 1,848 h, Functionality: fully functional, machine/vehicle number: 220564, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 48, swivel angle A-axis (min.): -110 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS X-axis (saddle left/right): 762 mm Y-axis (pallet front/back): 460 mm Z-axis (spindle up/down): 460 mm A-axis: +20 to −110° C-axis: 360° Table surface to spindle nose: 100 to 560 mm Control: OSP-P300MA-H Table Table size: ø400 mm Max. workpiece size: ø600 × h400 mm Floor to table top: 1,050 mm Max. load: 300 kg Spindle Spindle speed: 15,000 rpm Number of speed ranges: stepless Spindle taper: 7/24 Taper No. 40 Bearing diameter: ø70 mm Feed Rapid traverse speed: X-Y: 40 m/min, Z: 32 m/min Rapid traverse speed A-C: A: 14,400 deg/min, C: 18,000 deg/min Cutting feed: X-Y-Z: 32,000 mm/min Motors Spindle (10 min/cont): 22/18.5 kW Feed axes: X-Y-Z: 3.5 kW, A: 4.2 kW, C: 3.0 kW Tool Changer (ATC) Tool shank: MAS BT40 Pull stud: JIS-specified with through hole Hfolhewnpxxscdwxoh Tool capacity: 48 tools Max. tool diameter (with adjacent tool): ø90 mm Max. tool diameter (without adjacent tool): ø125 mm Max. tool length: 240 mm Max. tool weight: 8 kg Max. tool moment: 7.8 N·m (8 kg × 100 mm) Tool selection: memory random MACHINE DETAILS Height: 2,946 mm Footprint (W × D): 2,160 × 2,810 mm Weight: 7,700 kg Connected load: 40.5 kVA Spindle hours: 1,848 h EQUIPMENT - Spindle/spindle head cooling system: oil controller - Air filter (incl. regulator) - Oil-air lubrication system for spindle - A/C-axis rotary table with 0.0001 deg incl. DD encoder - C-axis table ø400 mm, T-slot 18H7, 6-fold tool holder - Automatic tool changer (32-position) - Tool magazine with slider - Coolant system: tank 170 L [effective: 100 L], pump: 250 W - Coolant nozzle: flexible nozzle (5-fold tool) - Chip conveyor table left/right - Chip tray with 60 L usable volume - ATC air blower (nozzle) - Chip air blower (nozzle) - Foundation blocks with clamping bolts (8 pieces) - 3-lamp status indicator type C (LED signal tower) - Work lamp LED - Full enclosure with roof - Tool for cleaning taper holes - Hand tools - Tool box - Control panel with color LCD - Handwheel

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,057 h, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, table width: 460 mm, table length: 800 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bid! Revised spindle and new spindle motor in August 2023 Spindle hours: approx. 18,000 h (new spindle: 1,057 h) TECHNICAL DETAILS   X-axis travel: 550 mm   Y-axis travel: 460 mm   Z-axis travel: 460 mm   Control: HEIDENHAIN TNC 530   Number of processing axes: 3   Tool holder: ISO SK 40   Speed range up to: 12,000 rpm   Number of tool positions: 24   Rapid traverse X: 30,000 mm/min   Rapid traverse Y: 30,000 mm/min   Rapid traverse Z: 24,000 mm/min   TABLE   Table width: 460 mm   Table length: 800 mm   Workpiece weight (max.): 300 kg   SPINDLE   Max. spindle speed: 12,000 rpm   Hfslhewqgvmocdwxoh Total spindle time: 18,000 h Revised spindle time with new spindle: 1,057 h (August 2023) WORKPIECE AUTOMATION   Number of pallets: 2   MACHINE DETAILS   Total height: 2,500 mm   Total weight: 4,000 kg   Required space length: 2,400 mm   Required space width: 2,000 mm   Connected load: 30 kVA   Connection voltage: 400 V   Mains frequency: 50 Hz   EQUIPMENT   - Chip conveyor   - Coolant system   - Fully enclosed working area   - CE compliant

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table width: 500 mm, table length: 100 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No minimum price – guaranteed sale to the highest bid! TECHNICAL DETAILS   X-axis travel: 2x 750 mm   Y-axis travel: 500 mm   Z-axis travel: 600 mm   Number of processing axes: 3   Simultaneous CNC axes: 3   Control: HEIDENHAIN ITNC 530C   Table width: 500 mm   Table length: 1,000 mm   Workpiece weight (max.): 800 kg   Hfslhcdowqgu Njwxoh Max. spindle speed: 10,000 rpm   Tool holder: ISO SK 40   Number of tool positions: 22   MACHINE DETAILS   Total height: 2,800 mm   Total weight: 8,000 kg   Required space length: 6,000 mm   Required space width: 4,500 mm   EQUIPMENT   - Design: moving column   - Various tool holders   - Each side with 3R clamping system   - Work area lamp

Condition: used, (1) Cincinnati Milacron Arrow 1000 CNC vertical milling machine, model ERO, S/N 7049-A0A-97-0272, with a 43" x 23" table, 60-8000 RPM spindle speed, CAT 40 spindle taper, 21 tool capacity, 40" X travel, 20" Y travel, 22" Z travel, Siemens Acramatic 2100 CNC control with pendant control, includes 36.5" width x 40" height x 23" depth heavy duty steel 2-tier cart, winning bidder responsible for proper removal. Hfelhswni Iaocdwxjh

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 12020 kg Control Unit Brand MAZATROL Movement X-Axis Movement 203.2 Y-Axis Movement 70.10 Z-Axis Movement 71.8 Additional Equipment Hslhcewfuqujdwxsfh Tool Taper: CAT#40 / Automatic Tool Changer (ATC): 48 tools This 3-axis Mazak VCN 700E/40-II vertical machining center was manufactured in 2013. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this Mazak VCN 700E/40-II vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2022, operating hours: 1,215 h, Functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Max Control, table width: 610 mm, table length: 1,270 mm, rotary table diameter: 600 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, The Hurco VMX42HSRTi high-speed 5-Axis CNC mill offers maximum flexibility. The SR series of 5-axis CNC mills offers multiple advantages, starting with the machine’s design configuration that utilizes a swivel head and C style rotary table. The generous size of the rotary table provides maximum versatility because you can use the extra table space for secondary operations or 3-axis work. This Hurco VMX42HSRTi is in perfect condition with very low spindle running hours. Hfslowrr Rxshcdwxsh

Condition: excellent (used), Year of construction: 2019, operating hours: 2,121 h, Functionality: fully functional, machine/vehicle number: 0712-101296, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS Travel X / Y / Z: 1,050 x 560 x 460 mm Control: OSP-P300MA-e Spindle motor: 22/18.5 kW (10 min./cont.) Spindle taper: NT40 (ø70 mm) Spindle speed: 50 to 15,000 rpm Max. torque: 199 N·m Spindle cooling: oil regulation Travel speeds Rapid feed X-/Y-axis: 40 m/min Rapid feed Z-axis: 32 m/min Cutting feed: max. 32 m/min Coolant supply Tank capacity: 230 L (effective 120 L) Pump output: 0.25 kW Shower coolant supply: present Coolant through spindle: medium pressure 1.5 MPa, 20 L/min Tool changer ATC specification: MAS BT40 + JIS special pull stud Tool capacity: 32 tools Tool release package: present ATC air blower: present Tool breakage monitoring (OTS Renishaw): present Tool measuring (OMP60 Renishaw): present Chip management Chip tray: present Chip conveyor (screw type): 0.1 kW × 2 units Air blower for chips: nozzle system Chip conveyor Mayfran H-type: present Preparation for chip conveyor M-A type: present Control CNC: OSP-P300MA-e Display: 15" color display, XGA 3D-E kit with special functions: incl. spiral milling, synchronized tapping II, free bevel angle, travel limitation, 3D simulation, tool management, cycle time reduction, automatic shut-off, and much more. IGF Advance-E expansion instead of standard 3D-E kit Machine protection & safety Total enclosure: CE compliant Status indicator light: 2-color (blue: end of operation, yellow: alarm) CE transformer & power supply adapted to local standards IEC conformity: present Other equipment Hfelhjwnpy Njcdwxjh Foundation washers: present Tool wear compensation: present TAS-S and TAS-C: present Operating hours: 2,121 h EQUIPMENT - ATC air blower - Tool release package - Chip tray - Shower coolant supply - Chip conveyor prepared (M-A type) - Mayfran H-type chip conveyor - Coil-type chip conveyor - Nozzle system for chip removal - Renishaw OTS tool breakage monitoring - Renishaw OMP60 probe - Smart Interface with API and virus protection - Total enclosure with CE - Status display with LED - Foundation washers - IGF Advance-E kit - 3D-E kit with cycle time reduction, monitoring, tool management - OSP-P300MA-e control with 15" color display - Operating hours indicator - Power supply CE compliant

Condition: used, Year of construction: 2017, An immaculate, ex OEM owned, lightly used Hurco DCX22i / 40 Double Column VMC that is very rarely seen on the pre owned market. This machine is spec'd with the more flexible 40 size CAT spindle taper and only 3700 cutting hours used for prototyping. Machine is also supplied with a Centreline right angle attachment and a full suit of tool holders as photographed. Great capacity too, as follows: Travels: 2,200 x 1,700 x 750 mm Table Size: 2,100 x 1,600 mm 12,000 RPM CAT 40 direct drive spindle with chiller Spindle Nose to Table 152 / 902 mm (Min-Max) Holhcewrbwnsdwxofh Max. Weight on Table: 8,000 kg Distance b/w Columns:1,750 mm Max. Spindle Speed: 12,000 rpm Spindle Power (peak - 1 min) 24 hp @ 900 rpm (18 kW @ 900 rpm) Spindle Torque (peak - 1 min) 175 ft lbs @ 720 rpm (237 Nm @ 720 rpm) Tool Type: CAT 40 Number Of Tools 40 Max Tool Diameter: 75 mm Max Tool Length: 300 mm Max Tool Weight: 7 kg Feedrates Rapid Traverse: 24 m/min Size Max. Operating Floor Space: 7,210 x 5,765 mm (with doors Open) Machine Height: 3,889 mm Machine Weight: 21,000 kg Power Rating-Full Load: 48KVA Table Size: 2,100 x 1,600 mm Max. Weight on Table: 8,000 kg Distance b/w Columns: 1,750 mm Max. Spindle Speed: 12,000 rpm Tool Type: CAT 40 Max Tool Diameter: 75 mm Max Tool Length: 300 mm Max Tool Weight: 7 kg Rapid Traverse: 24 m/min Machine Height: 3,889 mm Machine Weight: 21,000 kg Power Rating-Full Load: 48KVA

Condition: used, Year of construction: 2001, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control Sinumerik 810 D Shopmill total power requirement 13 kW weight of the machine ca. 7 t dimensions of the machine ca. 3 x 5 x 3 m No. 5377 vertical machining center DECKEL MAHO Type DMC 103 V year of construction 2001 Working area: 1000 x 600 x 600 mm Drive power: 9/13 kW Control: Sinumerik Shopmill Machine table 1200 x 600 mm, 24-fold tool magazine Electronic handwheel, IR measuring probe Direct measuring system Coolant device chip conveyor Hfolhcdsvtgxzowxeh Operating instructions Spindle ISO 40, Speed range 1-10,000 min-1, Feed rates 0-30,000 mm/min rapid traverse 30 m/min, only approx. 5200 switch-on hours Space requirement see sketch Transport dimensions approx. 6 LM Weight approx. 6.5 tons Special Price EXW N-2022 GJERDRUM / Norway

Condition: excellent (used), Year of construction: 2014, Traverses X Y Z: 1016mm x 508mm x 508mm, table size 1168mm x 508mm, 10000rpm spindle, 20 station ATC, Hfjlhcewrcplodwxjh Din40 spindle taper, input 15Kw, Hurco MAX control, coolant.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table length: 760 mm, table load: 1,400 kg, overall weight: 11,500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Vertical Traveling Column Machining Centre CNC Control Mazatrol 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm Hfslhcewtgnnedwxjh 4th Axis (Rotary table) Kitagawa MRM200 (MacMini)250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, Mazak Machining Center Type VTC - 200C Mazatrol Cnc Pc-Fusion-Cnc 640 M Year 2001 Machines Sold With A Divider + Tooling + Documentation + Cutting Conveyor Hfolhcdwovu Sudoxjh Visible Under Voltage In Production

Condition: like new (used), Year of construction: 2022, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Here’s the very 1st used MACH 845-8T Toolroom VMC to appear on the 2nd hand market! This low hours, highly spec’d and immaculate example is equipped with DynaPath’s Windelta touch screen control has been rented to a FE College and is now availabel for sale...its in as new condition, has an 8,000RPM spindle, 8Gb memory, 1,000 blocks of look ahead and is Wi-Fi enabled for remote support from MACH & DynaPath..(that’s included on this used machine tool ) Taken from MACH Machine Tools marketing material, they say; Hfjlhcommgpdsdwxoh This small footprint, high build and component part quality toolroom VMC features MACH’s cleverly designed 8 position ATC that’s arrange around the 10,000 RPM spindle, for simple, efficient and quick tool changes. As with all MACH CNC machines, the MDS 845-8T is equipped with DynaPath’s feature packed Windelta control system, with touch screen user interface. The control is capable of accepting multiple programme formats via its inbuilt USB, Ethernet or wireless interfaces. It can be programmed Conversationally, via DXF, in ISO/EIA G-Code formats and has a DFX and DFX program editor in built, making the control capable of accepting and editing programmes in any machine format. As a standard feature its equipped with full Wi-Fi connectivity for remote factory support. It has a huge 8Gb of memory, 1000 blocks of look ahead, for high quality and fast 3D contouring, a solid-state hard drive, Yaskawa digital drives and servo motors and a Delta spindle drive that controls the 10,000 RPM Direct Drive spindle, all mounted in an air-conditioned electrical cabinet. Specified way beyond its price point and backed up by the now legendary, MACH-DynaPath’s worldwide Wi-Fi remote support and team of dedicated engineers. Specification: Travels: X/Y/Z: 800 / 450 / 450 mm Spindle Nose to Table: 90 ~ 537 mm Centre of spindle to column: 435 mm Spindle Taper: BT40 Spindle Max RPM: 8,000 RPM Table Size: 850 x 420 mm T-Slots: 18 x 85 x 4off Max Table Load: 220 kg Max Rapid Rate: 20 m/min Max Cutting Rate: 10 m/min X/Y/Z Axis Type: Linear rail with roller bearings + Ball Screw ATC Type: 8-Tool Independent Arm, arrange around the spindle Max Tool Dia: 63 mm Ø Max Tool Weight: 5 kg Tool Change time: (Tool to Tool) : 2.8 sec Spindle Motor: 5.5 kW (7 HP) / 35 Nm X/Y/Z Servo motor rating: Yaskawa 0.85 / 0.85 / 1.3 kW Positioning Accuracy: 0.005 um Repeatability: ±0.003 um Power requirement: 15 Kva (supplied with 415V-220V 7kVA Transformer for UK) Air requirement: 6 kg/cm3 Footprint: (LxWxH): 2200 x 2539 x 2304 mm Weight: 3750 kg Control System: DynaPath WinDelta with 15" Touchscreen LCD D11 Console, MPG Handwheels, Conversational + DXF + ISO/EIA G-Code UKAS & CE compliant safety modules, interlocks & certification. 415V to 220V 7kVA Supplied with: UKCA/CE safety enclosure, interlocks and electrical equipment, 10,000 RPM BT40 spindle, set of 8 pull studs, through spindle coolant, bed wash, coolant/air gun, swarf augers, LED machine lighting, end of cycle light stack, electrical cabinet air conditioning, MPG, 8Gb of memory, DFX File reader with program editor, 1000 blocks look ahead, Wi-Fi remote support.

Condition: good (used), Year of construction: 2006, Traverses X Y Z: 1020 x 610 x 600mm, Pallet 1050 x 550mm, pallet load 300kgs, Spindle speed 12,000rpm, Spindle taper BT40, Holhcjwrcf Tjdwxsfh Spindle Motor 30kW, Fanuc 18I, 48 Station ATC, coolant, Low Volt light

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: PC Fusion 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table height: 760 mm, table load: 1,400 kg, overall weight: 12,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Hfjlswtgmwehcdwxeh Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2012, Traverses XYZ: 820 x 520 x 510mm, table 950 x 450mm, Spindle speed 8000rpm, Spindle motor 15kW, FANUC Oi-MD Control, Spindle taper BT40, Hfjlowq Su Ijhcdwxsh 20 station ATC, Coolant,

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, controller model: 640 M, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, table width: 1,300 mm, table length: 550 mm, overall weight: 8,900 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Holhewtgfajcdwxofh Weight of the machine: 8900 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 860 x 560 x 600mm, Table size 910 x 560mm, BT40 spindle taper, spindle speed 10,000 rpm, FANUC Oi-MF Control, 24 station ATC, Helhcdwewq Suhjxefh Coolant, Low Volt Light, swarf auger

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Hfslhcdwowtgbujxoh Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2012, Traverses XYZ: 850 x 520 x 510mm, Hjlhcdwowq Saqsxofh Table 1000 x 510mm, 17kW spindle motor, Fanuc OI-MD control, 10,000rpm Spindle Speed, 24 station ATC, BT40 taper, Swarf conveyor, Coolant, low volt light,

Condition: good (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Hfolhcdswq Iriswxoh Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Hurco Control, Spindle taper din40, 30 ATC, Coolant, Low volt light, Swarf Conveyor.

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z; 2134 x 864 x 762mm, table size 2184 x 865mm, table load 2,268 kgs, Hslhewq Ii Uecdwxsfh spindle speed 12,000rpm, spindle taper BT40, spindle power 22Kw, 30 station ATC, hurco control.