Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Unisign vertical machining centre model uni verse 3 (pendulum machine). The machine has X -, Y -, and z-axis movement by 1600 x 400 x 370 mm. The machine is equipped with a tool changer with 11 positions. Tool holder is ISO 30. Table dimensions are 2 x (850 x 420 mm), speed range is 30 to 6,000 umdr RPM control; Siemens 840 d control. Tool holders are doing. No swarf conveyor. The machine can be seen under power. The machine is in used but good condition. In the short term available. Subject to ... more
3
Mazak AJV 35/60 Twin Pallet Bridge Type, 1993 , s/n 107233, Mazatrol M32 Control, Table 1740mm x 750mm. Trav 1500 x 800 x 508mm, rapid traverse rate 24m/min X and Y, 18m/min Z, 22-3150rpm, 40atc, BT50 Ftdtlev8c more
5
x-travel 1450 mm y-travel 750 mm z-travel 950 mm Control Heidenhain iTNC 530 tool taper 50 SK spindle turning speed range 6500 U/min main drive 15 (S1) kW table surface area 1600 x 880 mm table load 1,5 t feed 1-5000 mm/min rapid traverse 20000 mm/min no. of tools in magazin 24-fach pos total power requirement kW weight of the machine ca. 10,3 t dimensions of the machine ca. 4778 x 3270 mm M9yjr Accessories chip (swarf) conveyor coolant through spindle more
1
travels:1270 x 760 x 750 mm table 1560 x 560 mm spindle 8000 rpm magazin 21 Tools CN ACRAMATIC. E0o0kwoj more
4
FANUC OM Axis travel: X 1200 * Y600 * Z600mm F7jnyhtf Spindle speed: 4000 RPM ATC: 24 persons BT50 Table size: 600 * 1400mm more
6
x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain Main spindle: turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 16 / 13 kW max. Torque 475 Nm tool taper SK 40 swivellable H/V NC-Tilting round table: table diameter Ø 1.000 mm max. table load 1.000 kg distance spindle center to column 900 mm number of T-slots 9 T-slot - distance 100 mm T-slot - width 18 H7 mm center hole 50 H6 mm table turning speeds max. 5,3 min/-1 swivellable ... more
6
Vertical CNC machining center Manufacturer AXA Type DBZ Bauajhr 2006 Control HEIDENHAIN iTNC530 Traverse paths x 2 x 750 mm Y 500mm Fvlwbro98 Z 600mm Chuck SK40 maximum spindle speed 12,000 rpm IKZ internal coolant supply 22 compartment tool changer 4th axis Power-on hours 29.500 h Spindle hours 9.600 h Band filter system Chip conveyor Machine had a crasch Server drove in changer, a Werkzeugplat defect. Machine was not measured, running tool changer only manuel possible. more
6

Vertical Machining Centre MTRENT V130-15TH

Düsseldorf Germany
6383 km
2015
USED
Offer
Another 27 days
x-travel: 1300 mm y-travel: 610 mm z-travel: 700 mm control: Heidenhain iTnc 530 table surface area l x w : 1450 x 610 mm taper: HSK 63 toolchanger positions: 60 turning speed range: 15000 rpm Weight approx.: 8200 kg Dimensions (l x w x h) approx.: 4000 x 3000 x 2800 mm Description: HEIDENHAIN probe TS 460 HEIDENHAIN TL Micro 150, Laser system for tool measurement IKZ 50 bar, GRUNDFOS including belt filter system Tool changer with double-arm gripper Tool change time 1.5 sec. Bzubl9z ... more
2
Control: HEIDENHAIN TNC 415 x Trail: 1700 (2 x 700) mm y-WEG: 400 mm z-WEG: 400 mm Table size: 1700 x 400 mm Speed range: 30-8500 RPM Tool Magazine: 20 x M9xov Tool holder: SK40 chip conveyor more


Centers (v...
every day

New machines via email!

Be informed!
1
Machining centre Model 2552 VMC L Table 1450x635 mm Max allowed weight on table 1200 kgs Travels: Ba7h99hb92 • X 1300 mm • Y 600 mm • Z 600 mm Spindle cone BT 40 Spindle speed 8000 r.p.m. Tool changer 24 tools Rapid traverse 15 m / min Power 25 kw Machine Weight 7500 kgs Equipped with: • CNC HEIDENHAIN iTNC 530 more
2
-Vertical machining center - Haas VF6/40 Hey Built in 2007 Controls: Haas Traverse path X-axis: 1626 mm Stroke Y-axis: 813 mm Z axis travel:: 762 mm Table size: 1620 x 710 mm B0e8279u Speed max: 7500 1/min Tool holder: ISO40 Number of tools: 40St more
2
x-travel 630 mm y-travel 500 mm z-travel 500 mm control Sinumerik 810 D Siemens Main spindle: turning speed range - main spindle 1 - 8.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 max. Torque 83 / 57 Nm work table: table surface area 800 x 500 mm number of T-slots 5 T-slot - distance 100 mm max. table load 500 kg max. workpiece height 240 mm table height over floor 850 mm Tool-Presetter: number of toolpositions 24 pos. Max. mould width 80 / (140) mm max. tool leng... more
6
Vertical CNC machining center Manufacturer AXA Type DBZ Bauajhr 2006 Control HEIDENHAIN iTNC530 Traverse paths x 2 x 750 mm Y 500mm Z 600mm Chuck SK40 maximum spindle speed 12,000 rpm IKZ internal coolant supply 22 compartment tool changer Ssxo90 4th axis Power-on hours 29.500 h Spindle hours 9.600 h Band filter system Chip conveyor Machine had a crasch Server drove in changer, a Werkzeugplat defect. Machine was not measured, running tool changer only manuel possible. more
6
x-travel: 1350 mm y-travel: 620 mm z-travel: 8100 mm control: Heidenhain iTNC 530 table surface area l x w : 1500 x 610 mm toolchanger positions: 40 turning speed range: max. 12000 rpm rapid traverse: 30 m/min Weight approx.: 9800 kg workpiece weight: 1250 kg Dimensions (l x w x h) approx.: 4200 x 2400 x 3010 mm M9q9z Description: KUNZMANN BA 1350 Vertical Machining Centre X/Y/Z 1350 x 620 x 810 mm CNC control Heidenhain type iTNC 530 table size 1500 x 610 mm tool changer with 40 positions spi... more
3
Machining center - vertical MICROCUT CHALLENGER VMC 1300 No. 1105-02364 category machining center - vertical make MICROCUT CHALLENGER type VMC 1300 year 2007 State second-hand machine control CNC storage France country of origin taiwan Li eferzeit immediately cargo base in stock, free loading truck technical details x way 1300 mm y-way 710 mm z-way 710 mm table size 1500 X 660 mm spindle retainer ISO SK 40 spindle projection 700 mm distance spindle nose and table 150-760 mm workpiece weight 1 T ... more
4
20jaq7 • Axes (X,Y,Z) : 1600x800x850 mm • Table: 1680 x 800 mm • Load on table 1000 Kg • Divisor 4th and 5th axes Ø 320 mm • Spindle’s speed : 8.000 rpm • Spindle’s power 11 Kw • Taper type : BT-40 • Tool chargeur 24 htas • CNC: Fanuc 18M • Electronic wheel • Internal coolant • Chip conveyor more
6
Chiron DZ 18 KL 2x36W 840 d Siemens control unit Original condition very well maintained Fe37vzb various parts of the machine have been completely redone Built in 2003 Including chip conveyor Including hydraulic power pack Test operation and inspection can take place at any time by appointment. more
6
x-travel 1.020 mm y-travel 510 mm z-travel 510 mm Control MSG 511 Main spindle: max. spindle speed 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT 40 transmission ratio 1 spindle diameter in front bearing 65 mm work table: table surface area 1.320 x 600 mm max. table load 1.200 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm Tool-Presetter: number of toolpositions 30 pos. tool taper MAS BT 40 max. tool diameter 80 mm max. tool-dia with free too... more
6
Traverse paths: X 1450 mm Y: 350 mm Z: 200 mm Frypqavvm 24 tool stations The 3 axes can be get lost properly over the controls, however, the spindle motor is only the movement of the tool change. All documents available. Weight: approx. 4000 kg more
6

Vertical Machining Centre HAAS VF 4 DAPCQHE

Düsseldorf Germany
6383 km
2005
USED
Offer
Another 43 days
x-travel: 1270 mm y-travel: 508 mm z-travel: 635 mm control: HAAS pallet table size: 1524 x 1270 mm table surface area l x w : 1016 x 463 mm numbers of pallets: 2 taper: SK40 DIN 69874 toolchanger positions: 40 Wq3ls power capacity - spindle: 15 kW spindle torque: 102 Nm turning speed range: 0 - 7500 rpm rapid traverse: 25,4 m/min total power requirement: 14 kW Weight approx.: 8500 kg workpiece weight: 454 kg Dimensions (l x w x h) approx.: 5740 x 2794 x 2985 mm Description: HAAS VF 4 DAPCQHE ... more
4
Control HEIDENHAIN TNC430, Procedures XYZ = 1300 x 710 x 710mm,. Speed 10.000U7min, Spindle retainer SK40-DIN69871 31-fahc tool changer INTERNAL COOLANT, HEIDENHAIN 3D measurement switch, Table size 1500x660mm, Ssxhsk more
3
5-axis M/C MIKRON HPM 1350 U Mfg. year 2015 Heidenhain iTNC 530 movements: X-axis: 1.350 mm Y-axis: 1.150 mm Z-axis: 700/895 mm B-axis: +16°/-120° A-axis: 360° NC-rotary table diameter 1.100 mm spindle motor 38 kW Max. spindle speed 15.000 rpm HSK-63 taper ATC with 48 tools Infrared Renishaw OMP60 Dual Laser Measuring System APS Advanced Process System Intelligent Thermal Control KinematicsOpt Rotating viewing window Manual Pilot smarT.NC Machine operation mode 3 and 4 Swarf conveyor CE-mark B... more
6
Microcut machining center CNC milling machine model: RH30 BJ: 2000 Working hours: ca. 35 thousand. Spindle hours: approximately 12 thousand. Tool holder: SK40 Tool changers: 16 x Jccwfqn Table size: 1854x610mm T slots: 18 x 5 Workpiece weight: 1500 kg Procedures: X = 1524; Y = 762; Z = 712 mm Spindle speed: 6000 RPM Control: Fagor 8055 MC Drives: Fagor Machine size: (Lxwxh) 4700x2600x2800mm Weight: 7000kg more
6
x-travel 1.600 mm y-travel 520 mm z-travel 425 mm Coprzip Control Sinumerik 810 M Siemens Main spindle: turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel ((( - ))) kW max. Torque 120 Nm tool taper SK 40 DIN 69871 spindle bearing diameter 80 mm work table: table surface area 2.300 x 570 mm max. table load 500 kg/m distance spindle /table 190 - 615 mm distance spindle center to column 535 mm Tool-Presetter: number of toolpositions 40 pos. tool taper SK 40 ... more
4
5-Axis Table size 2000 x 600 mm X-axis travel (column right / left movement) 1600 mm Y-axis travel (column back/forth movement) 700 mm 9kxbfwt8h Z-axis travel (spindle up / down movement) 800 mm A-axis (table rotation) travel amount/indexing 0,001° 360.000° B-axis (spindle head) travel amount/indexing 0,001° ± 100° Spindle taper HSK-63 A Max. / min. spindle speed 14.000 1/min Number of tools in magazine 32 pieces more
6

Vertical Machining Centre HAAS VF 4 DAPCQHE

Düsseldorf Germany
6383 km
2007
USED
Offer
Another 43 days
x-travel: 1270 mm y-travel: 508 mm z-travel: 635 mm control: HAAS pallet table size: 1524 x 1270 mm table surface area l x w : 1016 x 463 mm numbers of pallets: 2 taper: SK40 DIN 69874 toolchanger positions: 40 power capacity - spindle: 15 kW spindle torque: 102 Nm turning speed range: 0 - 7500 rpm rapid traverse: 25,4 m/min total power requirement: 14 kW Weight approx.: 8500 kg workpiece weight: 454 kg Dimensions (l x w x h) approx.: 5740 x 2794 x 2985 mm Description: HAAS VF 4 DAPCQHE Vertica... more
6
x-travel 1626 mm y-travel 813 mm z-travel 762 mm Control HAAS distance spindle nose and table 102 - 864 mm table surface area 1626 x 711 mm Width of the T-slots 16 mm number of T-slots 5 table load 1,814 t turning speeds 8100 U/min tool taper SK 40 feed max. 12700 mm/min rapid traverse max. 15 m/min tool changer SMTC 24 x Tool-Ø at free places 152 mm workpiece diameter at full load 76 mm weight of tools max. 5,4 kg coolant tank 360 l Internal cooling total power requirement 22,4 kW Givq... more
6
travel X-axis 1.500 mm travel X-axis (shuttle mode) 2 x 440 mm travel table Y-axis 300 mm travel Z-axis 350 mm 2 pallettes with area each 800 x 400 mm tool taper SK 40 B7kjlw0i spindle capacity 3,7 kW control GE FANUC Series 18i-M (5 axis) with 2 NC dividing apparatus EUROMA TNC161MVDM (4th/5th axis) 2 tables, partition wall cooling through spindle coolant attachment META 50 bar electronic handwheel ATC 20 ROTOBLOCK chip conveyor META Documentation more
3
Control: Siemens Table: 1300 x 600mm Maximum spindle speed of 10,000 rpm X axis: 1200mm Y axis: 600mm Z axis: 500mm 30-faches tool magazine quick coupler with double gripper Spindle cone SK 40 Climate Control Panel Ls2e3dm more
6
• Year 2005 • Contol Fanuc • 4 axis Cr37ruwk • Courses: X 1250mm Y 610 Z 450mm • Table work Surface 1400x600mm • Maximun table capacity 1.000kgs • Cone ISO 50 • Chip conveyor • Internal cooling • Electronic handwheel • Automatic measurement uts / renishaw • Measures : Height 2835x3155x2450mm • Weight 10.500kgs more
4
Moving Column Type 9f9yv7c0v Table size 2000 x 510 mm Movement x-Axis 1660 mm y-Axis 510 mm z-Axis 510 mm Number of tools in magazine 30 pieces Maximum spindle speed 12.000 1/min Tool taper DIN 69871-SK 40 CNC Control Mazatrol Fusion 640 more
6

Vertical Machining Centre BLUTHARDT BC 20 CNC

Düsseldorf Germany
6383 km
1990
USED
Offer
Another 13 days
x-travel: 1650 mm y-travel: 380 mm z-travel: 350 mm control: SIEMENS Sinumerik table surface area l x w : 1100 x 420 mm taper: SK 40 toolchanger positions: 24 spindle torque: 100 Nm turning speed range: 40 - 4000 rpm total power requirement: 15 kW Weight approx.: 4500 kg Gzbrifaj workpiece weight: 250 pro Tisch kg Dimensions (l x w x h) approx.: 3600 x 3600 x 3200 mm Description: BLUTHARDT BC 20 CNC Vertical Machining Centre - feed X-/Y-/Z-axis: 1 - 24.000/1 - 24.000/1-15.000 mm/min - rapid t... more
3
control Mazatrol M-Plus M9m8x travel X/Y /Z 1660/510/510 mm spindle speed 7000 1/min 4th axis tool magazine for 2x24 tools SK 40 central partition internal coolant more
6
x-travel 1626 mm y-travel 813 mm z-travel 762 mm Control HAAS Bbmgyvzq turning speeds 12000 U/min rapid traverse X-axis 13700 m/min Rapid travers Y, Z axis 15200 m/min spindle taper SK 40 tool changer 24 x Spindle hour 1807 h Number of working hours 5828 h table surface area 1625 x 710 mm dimensions of the machine ca. 3,38 x 4,80 x 3,10 m table load max. 1,814 t total power requirement 22,4 kW New spindle - 01/2017 - no 100 spindles hours until 05.05.2017 Chip conveyor Internal cooling Me... more
2
X-Axis: 1600 mm Y-axis: 400 mm Ft0dkxt Z-Axis: 425 mm Table area: 1880x475 mm Max table load 500 kg/m Spindle SK40 20-6000 rpm Power module need to be repaired more
2
x-travel 1200 mm y-travel 650 mm z-travel 650 mm Control Acramatic 850 9skvo72px turning speeds 8000 U/min spindle taper ISO 40 Tool changer 20 chip conveyor table surface area 1370x700 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
Make MAZAK Machine weight approx. 8000 kg Built in 1999 Type VTC 20C. z-way 510 mm y way 510 mm x trail 1660 mm Spindle speed 7000 RPM Chuck SK40 Space requirement approx. 5.5 X 3.2 X 2.8 m Table size 2000 x 510 mm Rapid traverse x axis 24 m / min Rapid traverse y axis 24 m / min Rapid traverse Z axis 20 m / min Main spindle motor power 15 KW Number of tool stations 2 x 24 pos. Control Mazatrol M plus Spindle speed: 7000 RPM Tool holder: SK40 Spindle drive: 15 KW Total power ... more
4
Kitamura with 4 axis Mycenter-6 1989 CNC FANUC type15 MA Capaciteit (X) 1220 mm (Y) 610mm (Z) 610 mm Table 1550 x 630 mm F0l3x2r BT50 50-5000 omdr per min. +/-11 ton 3800 x 2910 mm more
6
OVERVIEW: Brand: HAAS Model: VF-5/40XT Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 2011 Production hours: 12638 Location: Turkey Origin country: USA GENERAL DATA: Measurements width: 4470 mm Measurements depth: 3200 mm Measurements height: 3073 mm Machine weight: 7100 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 8100 1/min CONTROL UNIT: Brand: HAAS MOVEMENT: X-AXIS movement: 1524 mm Y-AXIS movement: 660 mm Z-AXIS movement... more
6

BAZ Depo MCFV 1680

Fröndenberg/Ruhr Germany
6430 km
2013
USED
Available from approximately August 2018! To visit by appointment in use Location: Märkischer circle / Northern Sauerland Technical data (according to manufacturer) Main drive SK 50 Continuous power (S1/100% duty cycle) 17 KW Of the front spindle bearing diameter 85 mm Speed range Max 8,000 min-1 Continuous torque (S1/100%) 519 NM Characteristic speed min-1 313 I9wmqwf X-axis (working table moves longitudinally) 1.650 mm Y-axis (working table moves across) 810 mm Z axis (milli... more
6
CNC Vertical machining center Hartford (SHE HONG) HV-70A YOM: 2000 Control: Mitsubishi 520 AM X: 1530 mm Y: 800 mm Z: 660 mm Table: 1700 x 750 mm Spindle speed: 4000 rpm Tool taper: ISO 50 Ba7ff9d88n ATC 32 tools Machine weight: 12,5 t. Equipment: 2 x chip conveyors, spindle cooling, coolant system. more
6
x-travel 1250 mm y-travel 550 mm z-travel 550 mm table surface area 1250x500 mm Tool changer 30 spindle taper ISO 40 control CAMM 2 total power requirement kW weight of the machine ca. t Etdbz7uii dimensions of the machine ca. m more
4
Control system: Heidenhain iTNC 530 Travel distances: X: 1200 Ba2vt89dc0 Y: 750 Z: 750 Spindle speed: 18000 rpm Engine power: 28 kW Machine weight: 10000 kg Equipment: Tool changer positions: 24 x HSK 63A Probe CNC TS220 Internal cooling more
6
x-travel 1200 mm y-travel 800 mm z-travel 800 mm Control SINUMERIK 3M table dimensions 1.000 x 800 mm workpiece weight 2.000 kg Ba0t30npnv speed spindle max. 5.600 U/min. tool taper SK 50 tool magacine with 60 Plätzen tool length - max. 400 mm Boring power 60 mm Milling power 200 mm power capacity 20 kW total power requirement 53 kW weight of the machine ca. 22 t dimensions of the machine ca. m more
6
x-travel 1270 mm y-travel 670 mm z-travel 625 mm CNC-control FANUC table-size 1300 x 670 mm max. table load 1000 kg spindle taper ISO SK 40 spindle turning speed range 8000 U/min feed stepless 0 - 15000 mm/min rapid traverse 36 / 36 / 30 m/min drive capacity - spindle motor 18,5 (15 min) kW tool change unit 30 Pos. voltage 380 V total power requirement 40 kVA weight of the machine ca. 8,5 t Mpgn7 dimensions of the machine ca. 3,20 x 2,45 x 2,40 m chip conveyor 4,10 x 0,65 x 1,50 coolant 3,60... more
5
CNC vertical machining center Brand: Mazak Type: VTC 20 C. Year of construction: 1998 CNC control: Mazatrol M plus Traverse paths: X/Y/Z = 1,660 x 510 x 510 mm Bayjgcvd09 Table size: 510 x 2,000 mm Round table Kitagawa maximum table load: 1000 kg Tool shank: SK40 Speed range: 40-7.000 rpm Main drive power: 11 KW Tool Magazine: 2 x 24 Max tool diameter: 80 mm Chip conveyor Machine weight: approx. 8,500 kg Machine dimensions: L x W x H: approx. 4.00 x 3.00 x 2.70 m Availabili... more
6
CNC machining center of Hedelius BC 40 d built: 1997 traverse paths: X axis: 1700 / Y axis: 400 / Z axis: 400 main spindle speed: 0-8000 RPM main spindle 16,25KW Max torque 102NM tool changer 20fold control Siemens 840 d tool holder: SK40 IKZ (held Re coolant) 4th axis MECA weight approx. 5000 kg are sold only to entrepreneurs in the sense of § 14 BGB 7epmrnmmm more
4
Machining centre ver. VMC 1250P3 Producer: Bridgeport Ba09ce9i9e YP: 2005 Control Siemens ... 810 D Worktable surface ... 1370 x 660mm Axis X ... 1250mm Axis Y ... 630mm Axis Z ... 600mm Spindle speed ... 8000 -_ / min. controlled axes ... 4 SK 40. Chip conveyor. more
6
x-travel 1.400 mm y-travel 800 mm z-travel 700 mm Control Fanuc 18i MB distance spindle /table 200 - 900 mm Main spindle: Speed Mainspindle max. 6.000 min/-1 power capacity - main spindel 26 / 22 kW tool taper SK 50 DIN 69871 A max. Torque 657 / 557 Nm transmission ratio 2 work table: table surface area 1.550 x 800 mm max. table load 1.800 kg Tool-Presetter: number of toolpositions 40 pos. tool taper SK 50 DIN 69871 A max. tool diameter 110 mm max. tool-dia with free toolbox 200 mm max... more


Centers (v...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close