Centering machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Machine vise, stable Vice, drilling vise Himjo3hsc Jaw width 65 mm Max clamping depth 100 mm Velocity -Zentriervorrichtung Dimensions 360/150/H120 mm Weight 10 kg more
2

Facing and Centering Machine SEMA END 100/2-600

Langenfeld, GermanyGermany dealership location
6403 km
2005
used
max. workpiece diameter -- mm min. workpiece diameter -- mm workpiece length 1200 mm Control Siemens 840 D turning speeds 4000 U/min Bcojxglzc9 internal coolant system feed JA total power requirement -- kW weight of the machine ca. -- t dimensions of the machine ca. -- m more
4
workpiece length 30 - 600 mm workpiece dia. 6 - 60 mm Uqvqrsvrv face diameter max. 50 mm core boring - depth 50 mm feed speeds max. 4000 mm/min forward feed of working head 55 mm rapid speed 6 m/min fine feed 10 mm/min spindle turning speed range 700 / 1400 U/min drive motor 3,7 kW weight of the machine ca. 280 kg dimensions of the machine ca. 1,10 x 0,50 x 2,00 m more
5
max. workpiece diameter 50 mm min. workpiece diameter 10 mm T3kvjix workpiece length 30 - 600 mm clamping diameter 6-60 mm clamping capacity 1200 kp face diameter max. 50 mm Tiefe core boring 50 mm Overwind to 30 mm total power requirement 2,4/3,7 kW weight of the machine ca. 360 kg dimensions of the machine ca. 0,9 x 0,6 x 2 m Electric 380 Volt Machine manual REDUCED PRICE! Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
3

Centering Machine B1 CNC

Göppingen, GermanyGermany dealership location
6699 km
1995
used
max. workpiece diameter unbk. mm min. workpiece diameter unbk. mm G0qt0d7 workpiece length mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1
max. workpiece diameter 80 mm min. workpiece diameter 15 mm workpiece length 2000 mm total power requirement 1 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,5 x 1,0 m M0d8j Deburring machine for pipe endings. more
6

Cutting and centering machine EMAG ESC 14

Fellbach, GermanyGermany dealership location
6664 km
1990
good (used)
Attention: the price has been reduced yet again very strongly! Mus3b The machine was by EMAG part overhauled and verified. Siemens 810 T double-sided Center and milling Ø 15-65 mm Length 180-1000 mm Tool magazine 2 x 6 SK 45 Bar loader: Portal system with 2 heads, without pallets more
max. workpiece diameter: mm max. workpiece diameter: mm min. workpiece diameter: mm no. of working stations:3 Stück travel -x axis:240 mm travel -y axis:400 + 230 mm travel -z axis:400 mm numbers of tools:2 x 6 drive turret left:11 kW D2olno7vg drive turret right:11 kW weight of the machine ca.:18400 t CNC - Facing and Centering Machine for Camshaft in good condition mit 3 Working Stations: - Station 31: Rotary table with clamping device for loading and unloading. After loading the table t... more
5

Facing and Centering Machine EMAG ESC 14

Unterschleißheim, GermanyGermany dealership location
6842 km
1988
used
max. workpiece diameter 140 mm min. workpiece diameter 20 mm workpiece length 1200 mm control SINUMERIK 3TT SIEMENS total power requirement 45 kW weight of the machine ca. 13 t dimensions of the machine ca. 10,00 x 7,00 x 4,00 m Facing and centering machine incl. portal-loading system HEILIG Siemens S3 control Knoll chip conveyor YOM 2011 03o7voqx3 2 tool-slide each with one milling tool to face the workpiece and one with SK45 with upper tool changer for centering and drilling. Rotoclear. ... more
6

Facing and Centering Machine Rems Werk ADM 96

Leipzig, GermanyGermany dealership location
6734 km
1991
used
workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 16,0 kW weight of the machine ca.: Anfrage t dimension machine [... more


centering ...
daily

New machines via email!

Stay updated!
4

Facing and centering machine WMW FXLZD160/B

Sahatie 9, 40800 Vaajakoski, FIFinland
6873 km
good condition (used)
In good working condition. Bb0lthxqnz more
4
WMW HECKERT SABO BASE 160 G Max workpiece diam: 20/160 mm. Bao9uhv73r Workpiece length: 1000 mm. Number of spindle: 4 Total power: 14.5 kw Spindle speeds: milling 112-224 rpm drilling 560-1400 rpm weight: 3500 kg Thread processing more
6
Double-sided Hydr. Centering machine Fabr. M in TEST TOVAGLIERI type M 25 Masch.# M256 built in 1977 Technical data: Tip height 125 mm Top width 1500 mm Chuck diameter 125 mm External dimensions 4700 x 1300 x 1600 the rear/front -front two cut / rear -Conveyors 8uem8vbfp -sep. Hydraulic used more
1

Facing and Centering Machine SAMAG SM-Ölkanal

Staufenberg, GermanyGermany dealership location
6540 km
2004
used
max. workpiece diameter: mm min. workpiece diameter: mm workpiece length: mm total power requirement: kW weight of the machine ca.:11,5 t dimensions of the machine ca.: m 9escjdmfk Facing and Centering machine for oil duct on camshafts. more
3
Name: Cutting and centering machine Type: ZM 3 year: 1967 Serial number: 6704-3047 Manufacturer: Willy Schlatter Ltd. Int. Machine number: #2620 Ffgkaek Electrical connection voltage [V]: 380 Frequency [Hz]: 50 Total power [kW]: 3.2 Parameters of machining Spanndurchmeser: - Max [mm]: 180 -Min. [mm]: 20 The length width [mm]: 3,050 Spindle stroke [mm]: 80 Machine parameters Spindeldrehzahlberich [U/min]: 63. 1,300 Drill head 3-shafts -Spindle 1 3 L - MK 3 -Spindle 2 3 M ... more
2
Working dia of the workpiece min/max - 20/160 mm Length of the workpiece, min/max -130/900 mm Max weight of the workpiece - 125 kg Fvmdqzqt Working spindles (2 pcs of each type) Milling spindles - spindle taper SK 50 - feed range 15…800 mm/min - speed range 112 – 180 – 280 min-1 Centering spindles - for diameter 4 –6,3 –10 –14 –16 –20 mm - feed range 15…375 mm/min - speed range 280-450-560-710–900–1400 min-1 Threading spindles - tightening hole Ø30 mm Total installed power – 20 kW ... more
5

Facing and Centering Machine WERAG EM 133-QS-NC-800

Staufenberg, GermanyGermany dealership location
6540 km
1997
used
max. workpiece diameter: mm min. workpiece diameter: mm workpiece length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 8w8r0k3t9 Crank shaft more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Gwmuwulcq COMIL STAR 200B Shrink Wrap System for Case Goods. -- Product is automatically carried to unwinding unit for top & bottom wrapping application with foil/film, welding/cutting of film after product passes through foil application station. -- The loosely wrapped product is transferred to the Tunnel for film heat shrinking; the edge pressing rollers at the outfeed of the tunnel collect the excess film, while they apply the final side/edge pressur... more
7
Serial No. C991106 Rapid blade adjustment Yes G9bz3eqeq Variable rake Yes Work supports 2 @ 1500 mm Squaring arms 1@' 1500 mm Input 15 kw Equipment Spare set of blades more
1

Bed type Correa Milling machine CORREA CF22 - 9670107CF22

Burgos, SpainSpain dealership location
6043 km
1996
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 2000 x 700 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Universal manual To... more
12

Strapping Machine Signode LC 1000

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1997
ready for operation (used)
Ser. No. 6101300DEKunststoffbandumreifungsautomat, #454Ser.-Nr. 6101300 Bclpm9ayl7 more
10

Machine accessories ERICSSON & SANDVIK Sk50

Babberich, NetherlandsNetherlands dealership location
6320 km
2009
ready for operation (used)
Muejxo more
5

Table Type Boring and Milling Machine WOTAN B 80 T

Mönchengladbach, GermanyGermany dealership location
6371 km
used
spindle diameter:80 mm x-travel:1000 mm y-travel:900 mm Gvyibfkgc z-axis table approx.:1120 quill stroke:710 mm spindle taper MT:5 Table area:1060 x 980 mm spindle turning speed range:6 - 710 U/min total power requirement:15 kW weight of the machine ca.:9 t dimensions of the machine ca.:4 x 2,6 x 2,6 m The machine was in a training school and generally overhauled in 2008! 5-axes digital readout make HEIDENHAIN diverse clamping tools and toolholders more
1

SURFACE DEFECT REPAIR MACHINE WINTERSTEIGER TRC-M EASY

North Carolina, United StatesUnited States dealership location
518 km
2017
used
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Gydqcb3cs WINTERSTEIGER TRC-M EASY SURFACE REPAIR MACHINE: -- Specifications:The TRC-M Easy is the entry model in the TRC product line. This semi-automatic machine is the perfect solution for small companies who aim to achieve a superior [...] quality of the repair with a good output and the low investment make the TRC-M Easy the right choice for a large number of customers. -- Applications:Top layers, parquet flooring, solid parquet planks, solid wood b... more
1

Guillotines / Shearing KINGSLAND 3006 3000mm x 6mm hydraulic Guillotine / Shearing Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1996
ready for operation (used)
Serial No. 3602 Capacity 3000mm x 6mm Back gauge Power Rapid blade adjustment Yes Shadow-line Yes Work supports 2 @ 1500mm Squaring arms 1 @ 1000mm Input 415/3/50 ac 11 kW approx Clamps 14 x hydraulic Read-out to back gauge Metric Actuated via Wander type foot switch Fitted with Finger Guard Length 12'6" / 3.81m Width 6'6" / 1.98m Height 5'6" / 1.68m Nett weight actual. 7 Tons / 7100 Kgs Nedy9 more
13

Bed type Correa Milling machine CORREA CF17 - 9685607CF17

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 2000 x 700 mm Number of T slots: 6 T slots dimensions: 18 mm Traverses of axis X axis traverse: 1800 mm Y axis traverse: 800 mm B0b9uyg0 Z axis traverse: 800 mm Milling head Head type: Universal... more
12

Strapping Machine Signode KRS-E-200-70/70

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1994
ready for operation (used)
Ser. No. 746367DEUmreifungsautomat, #455Ser.-Nr. 746367 Bclpnir798 more
8

Machine accessories Bt 50

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
G7rmq2p more
5
Thread-cutting machine, pipe thread cutter -for maximum 2 in. pipe size Dies 1 "inch -Tems on 3 gear Hh3f3kcua Dimensions 550/360/H240 mm Weight 55 kg more
1

ROPING MACHINE & SPLITTING SAW. RENZO BORGONOVO LCB-600/ 601

North Carolina, United StatesUnited States dealership location
518 km
2006
used
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbuqp8ror9 RENZO BORGONOVO LCB-600 ROPE MACHINE & LCB-601 SPLITTING [...] to produce a wide range of spiral wood roping in a continuous length. Square stock is fed into the machine to manufacture spiral twist roping from .3" (3 mm) - 2-3/8" (60 mm). -- A series of sleeve -tube- guides which are easily replaced allow the machine to be setup quickly for each variation in dia. and size of cutters; variable frequency drive on the draw plate controls feed speed... more
7
Serial No. 3321 Nedz7 Cutting Length 3000 mm Cutting Width 1500 mm Thickness of Cut 12 mm Plasma Duty Cycle 45 amps @ 50% or 32 amps @ 100% Input 415/3/50 Control Burny DNC 2.8 Traverse speed variable Length 13' 4" Width 7' Height 4' 2" Nett Weight actual. 1150 Kgs / 1.13 Tons more
12

Bed type Correa Milling Machine CORREA A25/30 - 1991A25/30

Burgos, SpainSpain dealership location
6043 km
1991
ready for operation (used)
Retrofitted: 2017 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 3500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Head type: Automatic UDG-30... more
6

Gear Testing Machine HÖFLER EMZ 2002 / 2602

Monheim, GermanyGermany dealership location
6403 km
1991
used
max. wheel diameter 20 - 2650 mm gear width - mm max. module 32 Q8cq28rrj distance between centres 1850 workpiece weight max. 10.000 kg table diameter 1100 mm Machine can be inspected under power. Setting-up and installation at the customers' is possible against extra charges. - many accessoires - Hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters) more
6

Machine accessories Bt 50

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
Bvp8utpq more
4
Machine reamers, reamer, reaming tool, pass knife blade -3 x reamers Diameter ø 37 mm H7 Recording MK3 Number 3 piece -sold Due8di Weight 6 kg more
1
Elect./Voltage: 208/220/440 V, 60 Cy, 3 Ph Ebyamst WEEKE OPTIMAT BHP VANTAGE 34M FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:5' x 10' Flat Table "Bridge Gantry" machine with User-Friendly "S/C Tech" "MATRIX" grooved phenolic vacuum table. -- Working Area:"X" Axis is 122" (3,100 mm), "Y" axis 61" (1,550 mm), "Z" axis stroke is 6.1" (155 mm), max. material thickness of 3.1" (80 mm). -- Positioning Speed:"X" & "Y" Axis is 315 FPM (96 MPM), "Z" axis 82 FPM (25 MPM);The head travels... more
1

Guillotines / Shearing EDWARDS Truecut DD 3.25mm x 2500mm Guillotine / Shearing Machine.

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 7417900716 Capacity 2500 mm x 3.25 mm Bcie82sncy Back gauge hand operated rack and pinion Work supports 2 @ 37" long Input 415/3/50 7.5 kw Clamps full length mechnical Actuated via wander type foot switch Length 10' 4" Width 3' Height 4' Nett weight actual. 2,300 Kgs / 2.26 Tons more
11

Bed type Correa Milling machine Correa A30/50 - 6300406A30/50

Burgos, SpainSpain dealership location
6043 km
1996
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 5000 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Head type: Universal Auto-i... more
6
grinding diameter - mm grinding length - mm centre height - mm Rcvnfx0 Control - total power requirement - kW weight of the machine ca. - t dimensions of the machine ca. - m more
10

Machine accessories TOS Varsndorf LD 650

Babberich, NetherlandsNetherlands dealership location
6320 km
2013
ready for operation (used)
Bch9ifrult more
5
Thread-cutting machine, pipe thread cutter Csizjx7s -for maximum 2 in. pipe size Dies 1 "inch Drive about 3 gear Dimensions 550/360/H240 mm Weight 60 kg more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Ncdml HOMAG BOF 311/38/R OPTIMAT FLAT TABLE MACHINE (W/ATC): -- Specifications:5' x 12' "MATRIX" Flat Table with a 2-zone vacuum table system designed for pendulum processing. -- Axes Travel Range:"X" Axis 169" (4,300 mm), "Y" axis 88.9" (2,260 mm), "Z" axis stroke 21" (535 mm). -- Working Field:"X" axis 149.6" (3,800 mm), "Y" axis 64.5" (1,640 mm) for routing & 59" (1,500 mm) for all units, max. material thickness is 7.8" (200 mm). -- Positioning Sp... more
8

Woodworking Machines HARWI 1550 Wall Panel Saw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 5911BH Year of manufacture 2006 Capacity 3400 mm x 1550 mm blade size 250 mm Depth of cut 50 mm Tljfkqs9 input 415/3/50 3 kW Equipment Single bag dust extractor Nett weight actual. 630 Kgs (0.62 Tons) more
2

Bed type Correa Milling Machine CORREA A25/50 - 9252316A25/50

Burgos, SpainSpain dealership location
6043 km
1990
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 5000 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse (mm): 5000 Y axis traverse (mm): 1200 Z axis traverse (mm): 1000 Milling head Head type: Universal ... more
6

Balancing Machine CEMB HSB-D

Monheim, GermanyGermany dealership location
6405 km
2008
used
workpiece weight 4 kg workpiece length 200 mm dia. on complete length 200 mm Control Siemens 840 D sl x-axis 120 mm y-axis 120 mm z-axis 300 mm diameter of hob 3,5 oder 4 mm milling drive 0,75 kW hob turning speeds 8000 U/min air pressure - required 7 bar connected load 15 kW electrics - voltage/frequency 400 / 50 V/Hz dimensions m weight 3,5 t Field of application - Automatic balancing machine for measuring and for reducing vibrations on turbocompressor assemblies. A specific software all... more
11

Sawing machine Pilous TMJ ARG 130 Complet

Babberich, NetherlandsNetherlands dealership location
6320 km
2015
ready for operation (used)
Technical data Band saw / cold saws / AutomatBandsaw MITRE L / R Gao + R Cutting capacity 90 ˚ Ø130 mm Cutting capacity 90 ˚ Flach180 x 100 mm Bch9jcffhw Section 45˚ Ø115 mm Cutting capacity 45 ˚ Flach115 x 75 mm Bandabmessung1730 x 13 x 0,65 mm Cutting ... more
5
Machine reamers, reamer, reaming tool, pass knife blade -31 x reamers Diameter ø 20 mm H6 Recording MK2 Number 31 pieces -sold B2lu7iaw Weight 7.2 kg more
1

FLAT TABLE MACHINE (W/ATC/BORING) WEEKE BHP 200

More Weeke Bhp 200
North Carolina, United StatesUnited States dealership location
518 km
2005
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Bbu9a22xcx WEEKE BHP 200 FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:6' x 12' Bridge Gantry" machine; "O-TRIX" HI-FLOW vacuum table for nested base processing. -- Working field: "X" Axis is 145.7 (3,700 mm), "Y" axis 1,880 mm (74"), "Z" axis stroke is 12.8" (325 mm); max. material thickness of 4" (100 mm). -- Positioning speed: "X" Axis is 165 FPM (50 MPM), "Y" axis 131 FPM (40 MPM), "Z" axis is 65 FPM (20 MPM); machine head travels on TH... more
9

Guillotines / Shearing PEARSON 6' x 1/2" / 1828mm x 13mm Guillotine/Shearing Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 4641. Capacity 6' x 1/2" Back gauge Power operated Rapid blade adjustment yes Work supports 2 @ 60" long Squaring arms 1 ' 60" long D2girin Input 380/3 /50 15hp approx Clamps 7 x hydraulic Read-out to back gauge imperial Actuated via full length foot treadle Length 8' 10" Width 7' 6" Height 6' 8" Nett weight actual. 8500 Kgs (8.37 Tons) more
14

Bridge type Correa Milling machine CORREA PANTERAPANTERA

Burgos, SpainSpain dealership location
6043 km
2003
ready for operation (used)
Numerical control: SIEMENS 840 D Technical features Dimensions Table dimensions: 14.000 x 2.500 mm Number of T slots: 10 T slots dimensions: 22 mm Traverses of axis X axis traverse: 14.000 mm Y axis traverse: 3.100 mm Distance between columns: 4.417 mm Z axis traverse: 1.200 mm (220 - 1.420 mm) Milling head ... more


centering ...
daily

New machines via email!

Stay updated!

to

to

Edit search
CENTERING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close