Used Mazak V 414 for sale (337)

Condition: not inspected (used), Year of construction: 1998, functionality: limited functionality, MAZAK V 414-22 B Vertical machining center with tool changer Tools: SK40 Control: Mazatrol dialog control M-Plus Operating hours: approx. 54,000 h Condition: well-maintained, good condition Documentation and service records available Please read our documents. Technical Data: Table size: 900 x 410 mm Maximum table load: 500 kg X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Bedpjyf H S Aefx Ab Uowk Rapid traverse speed X / Y / Z axes: 26 / 26 / 20 m/min Spindle: DIN 69871 / SK40 Spindle speed: 50 - 7,000 rpm Number of tools in magazine: 22 Workpiece mass (horizontal): 100 kg Accessories on request: Various SK40 toolholders Various Sandvik milling cutters Mechanical or hydraulic vise Renishaw workpiece measurement system

Condition: excellent (used), Year of construction: 2024, operating hours: 250 h, 3-axis CNC machine (VMC) MAZAK - VCE-600 MACH-ID 9485 Bsdpfxoyyygwj Ab Uowk Make: MAZAK Type: VCE-600 Control: Mazatrol SMOOTHEZ Year: 2024 Only 250 Spindle Hours ATC 48 Position Lehmann EA-520 R-Mi4 4e axis integrated Grundfos IKZ 20 Bar Renishaw 3D Tool probe Renishaw Length probe Optional tooling packge Optional SCHUNK KONTEC KSG Machine vice (4 units) New EUR 200.000 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Bjdpfx Ajyyybhsb Uowk Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, x-travel 1300 mm y-travel 510 mm z-travel 570 mm Bsdpoyyc Svefx Ab Uowk max. workpiece weight 1200 kg spindle turning speed range 12000 U/min weight of the machine ca. 7,1 t required space 5,00 x 3,20 x 3,00 m

Condition: used, Year of construction: 2010, Mazak INTEGREX 300-IV – Technical Data Year of manufacture: 10/2010 Model according to nameplate: INTEGREX 300-IV Serial number / Ass. No.: 221788 Power on time: approx. 50 000 hours General Machine Data Machine type: Turn-mill center Control: Mazatrol Matrix Chuck: Kitagawa B-212 (12”) Max. turning diameter: approx. 762 mm Max. machining length: approx. 1524 mm Bar capacity: approx. 76 mm Main spindle speed: 4,000 rpm Second spindle speed: 4,000 rpm Milling spindle speed: up to 12,000 rpm Bsdpsyxm S Rsfx Ab Uswk Tool magazine: 40 stations C-axis: 0.001° B-axis: 0.001° indexing X-axis travel: approx. 630 mm Y-axis travel: approx. 230 mm Z-axis travel: approx. 1585 mm Main power supply: 3 AC, 400 V, 50/60 Hz Control circuit: AC 100 V / DC 24 V Max. current: 80 A

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller model: Mazatrol Fusion 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Swivel range A-axis: +30° / -120° Rotation range C-axis: +/- 360° Feed rate range (X-/ Y-/ Z-axis): 1 - 50,000 mm/min Rapid traverse (X-/ Y-/ Z-axis): 50 m/min Indexing A and C: 0.001° Swivel time 90° A/C: 1.9 / 1.5 s Main spindle Max. spindle speed: 12,000 rpm Spindle drive power: 22/15 kW Tool holder: ISO 40 Spindle diameter: 80 mm Acceleration time to max. speed: 1.7 s Worktable Clamping surface: 500 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 80 mm Distance from spindle to table: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Tool changer Max. number of tool positions: 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent spaces free: 125 mm Max. tool length: 300 mm Bwjdpfsyxmq Tex Ab Ujk Max. tool weight: 8 kg Tool change time: 4.5 s MACHINE DETAILS Control: Mazatrol Fusion 640M Total power requirement: 51 kVA Dimensions & Weight Space requirement: 3.4 x 3.7 x 2.8 m Machine weight: 7.5 t EQUIPMENT Hydraulic unit Coolant system Chip tray Tool measurement Documentation

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VTC 760 was manufactured in 2020. It features an X-axis travel of 1740 mm, Y-axis travel of 760 mm, and Z-axis travel of 660 mm. The machine includes a spacious table size of 2300 x 760 mm and a maximum workpiece weight capacity of 1400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 760 vertical machining centre we have for sale. Contact us for further details. • Control: Smooth G • Table size: 2300 x 760 mm • Distance table to spindle nose: 180 mm • Max workpiece size: 4100 x 905 x 790 mm • Table surface: T-slots Bsdpfx Aboyxdtfe Ujwk • Max workpiece weight: 1400 kg • Rapid feed (X/Y/Z): 42,000 mm/min • Coolant pressure: 18 bar (additional tank) Additional equipment • Fume extractor • Schunk vises • Zero-point clamping system • Nakanishi high-speed spindle (50,000 rpm) • Tooling sets with cabinets and benches Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS C 600 was manufactured in 2022. It features a table size of 730 x 450 mm and impressive travels of 650 mm in the X-axis, 550 mm in the Y-axis, and 530 mm in the Z-axis. The machine is equipped with a spindle speed of 18,000 rpm and a tool magazine that holds 60 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS C 600 vertical machining centre we have for sale. Contact us for further details. • Control: Smooth X • Table size: 730 x 450 mm • Through-spindle coolant: 20 bar • Number of pallets: 1 • Table type: T-slot table Bedpfx Abjyxdcgs Uewk • Capability: Continuous simultaneous 5-axis machining Additional equipment • Renishaw probe • Remote handwheel • Air blow on spindle flange Technical Specification Taper Size ISO 40

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS Bjdpfx Abjyy Thzo Uowk HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Bodpfx Abewyblzo Uowk Parts shown by hand not come.

Condition: used, Year of construction: 2008, x-travel 1250 mm y-travel 1000 mm z-travel 1000 mm control Matrix max. workpiece diameter 1060 mm workpiece length - max. 1000 mm Bwsdpfxoywntms Ab Uok chucking diameter 800 mm type of pallet-changer 2 St. milling head speed 10000 U/min table turning speeds 500 U/min numbers of tools in magazin 120 tool taper 50 ISO table drive 37 kW milling drive 37 kW total power requirement 110 kW weight of the machine ca. 37 t dimensions of the machine ca. 5 x 4 x 3 m Milling and turning machine with 5 axes. Control: Mazatrol Matrix. Machine has coolant through spindle with mist exhaust and is prepared for Renishaw OMP.

Condition: used, Year of construction: 2006, x-travel 1250 mm Bwedpfeywntajx Ab Usk y-travel 1000 mm z-travel 1000 mm control 640MPlus max. workpiece diameter 1060 mm workpiece length - max. 1000 mm chucking diameter 800 mm type of pallet-changer 2 St. milling head speed 10000 U/min table turning speeds 500 U/min numbers of tools in magazin 80 tool taper 50 ISO table drive 37 kW milling drive 37 kW total power requirement 110 kW weight of the machine ca. 36 t dimensions of the machine ca. 5 x 4 x 3 m Milling and turning machine with 5 axes. Control: Mazatrol 640 MPlus. Machine has coolant through spindle with mist exhaust and is prepared for Renishaw OMP.

Condition: good (used), Year of construction: 2020, functionality: fully functional, 1.753 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC MAZAK VARIAXIS i-800 5-Axis Machining Center Year of Manufacture October 2020 Commissioning 2021 Smooth X Control Pallet Changer, 2 Pallets Travels: X-Axis: 730 mm Y-Axis: 800 mm Z-Axis: 560 mm A-Axis: -120° to +30° C-Axis: ±360° Max. Spindle Speed: 10,000 rpm SK-50 Tool Holder, DIN 69871 -Tool Magazine for 120 Tools Bodpjywii Nofx Ab Ujwk -Prepared for Hydraulic Clamping incl. Pallet Clamping Function -Automatic Pallet Changer -Electronic Handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High-pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 laser -Air blow-off on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 probe -Robot interface -Various Software Options MAZAK VC PRIMOS 400 L Vertical Machining Center Year of manufacture 2020, installed 2021 Mazatrol Smooth C Travels X: 500 mm Y: 400 mm Z: 350 mm Table size: 600 x 400 mm Max. table load: 300 kg Milling spindle AC 11 kW Max. spindle speed: 12,000 rpm 14 tools, BT30 -2 hydraulic connections -Automatic door -Oil mist lubrication -Signal light -Airflow through rotating spindle -Mazak Monitoring B, incl. Renishaw OMP40 probe -Robot interface -Various Software Options CELLRO ELEVATE E-110-165 Robot cell with parts storage Elevate W 2000 mm – H 4000 mm Fanuc robot R-2000 165F iC Fanuc robot max. payload: 165 kg max. handling weight: 90 kg Automatic gripper change system Manual gripping force control Workpiece rotary station Workpiece measuring station SPC trays for measuring parts during the process Air blow-off station Various trays 1600 x 550 mm Loading with extendable tray Interface for 2 Variaxis i-800s and one VCP400L

Condition: excellent (used), Year of construction: 2015, Maximum turning diameter: approx. 380 mm Maximum swing over bed: approx. 675 mm Maximum turning length: approx. 500–540 mm Bar capacity (main spindle): approx. 76 mm (3″) MAIN SPINDLE Maximum spindle speed: 4,000 rpm Spindle motor power: 26 kW Spindle bore: approx. 77–88 mm Chuck: 8″ power chuck SUB SPINDLE Maximum spindle speed: 6,000 rpm Spindle motor power: approx. 11 kW Chuck: 6″ or 8″ power chuck Part transfer function AXES X-axis travel: approx. 230 mm Z-axis travel: approx. 575 mm C-axis on main spindle (full contouring and interpolation) TURRET / TOOLING Number of tool stations: 12 positions Live tooling capability (drilling and milling) Tool measurement system (Tool Eye) CNC control: Mazatrol Matrix Nexus EIA/ISO programming Conversational Mazatrol programming 19″ color LCD screen (touch screen) COOLING & CHIP HANDLING High pressure coolant through spindle: 15 bar External flood coolant via spindle nozzles Hinged belt chip conveyor with side discharge Complete coolant system with pumps and filters AUTOMATION Automatic bar feeder included Automatic chuck open/close Chuck status feedback via sensors Bedpfx Aoyg It Dob Uowk Automatic part transfer between spindles OTHER FEATURES Pitch error compensation (X, Z) 3D tool compensation Helical interpolation Polar coordinate programming Thread cutting (G33) Workpiece coordinate rotation User macro functions Tool breakage detection MACHINE DIMENSIONS & WEIGHT (approx.) Machine weight: 5,000 – 5,500 kg Machine footprint: approx. 2,600 × 2,000 × 1,900 mm

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm movements x/y/z: 560/410/380 mm spindle taper: SK 40 Bwodpfedhhprsx Ab Usk spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm weight: 3500 kg

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control Bwodpsyvvlusfx Ab Ujk - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, We are offering this Mazak INTEGREX i500V CNC turning and milling machining center, in very good condition, year of manufacture 2014. Bodpfx Aeyymrmob Uswk Manufacturer: Mazak Model: INTEGREX i500V Year of manufacture: 2014 Condition: very good If you have any questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2006, machine/vehicle number: 184620, Control: Mazatrol 640 Nexus X-way: 560 mm Y-way: 410 mm Cdnxm9qiuu Z-way: 510 mm Table size: 900x410 mm Spindle cone: Sk40 Tool changer: 30 pl. Bodpskn Dxqefx Ab Uewk Spindle speed: 12000 1/min IKZ: 15 bar Chip conveyour Machine weight: 5010 kg

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 430 mm z-travel 510 mm control Mazatrol Smart table surface area 900 x 430 mm max. table load 500 kg number of spindle speeds 40-12000 U/min rapid speed 42000 mm/min tool magazine with 30 Plätzen max. tool diameter 125 mm weight of the machine ca. 4800 kg Just 4,362 hours of pure machining! Capacity: External dimensions of the machine table: 900 x 430 mm Travel range X/Y/Z axis: 560/430/510 mm Distance from spindle head to table surface: Bjdpsyukgijfx Ab Uewk Min: 150 mm Max. 660 mm Spindle: Spindle speed: 40-12000 (two electrical stages) Feed rate: Rapid traverse speed: 42000 mm/min Cutting feed rate: 1-8000 rpm ATC magazine: Tool magazine slots: 30 Tool shank type: MAS BT-40 Max. tool diameter: with adjacent tools: 80 mm without adjacent tools: 125 mm Max. total weight of tools in magazine: 120 kg Equipment/accessories: Coolant system Vices (not shown in the photo) Tool holders Tools Documentation

Condition: good (used), Year of construction: 2008, Table size, pallet size: 500 x 500 mm Pallet quantity: 2 Maximum workpiece size: 730 x 500 mm Maximum table load: 500 kg Travel paths: X-axis: 630 mm Y-axis: 765 mm Bwsdpfx Absr Drcmj Uok Z-axis: 510 mm C-axis: 360° (turntable) A-axis: +30°/-120° (swivel table) Speed range: 12 000 rpm Tool holder: SK 40 Tool positions: 80 Internal tool cooling: 20 bar Main drive power: 26 KW Machine weight: 17 000 kg Space requirement (LxWxH): 5 500 x 4 000 x 3 400 mm Control system: Mazatrol Matrix Accessories: Chip conveyor, complete documentation for the machine.

Condition: used, Year of construction: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min tool taper Capto C6 rapid traverse y/x/z axis 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Bjdpoyt R Idefx Ab Uowk Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Bwedotuggcepfx Ab Ujk Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: new, Year of construction: 2026, Working Area Travel X: 730 mm Travel Y: 450 mm Travel Z: 470 mm Swivel Range B Axis: 220° (±110°) B Axis Indexing: 0.0001° Swivel Range C Axis: 360° Table Load Capacity: 200 kg Max. Workpiece Diameter: 500 mm Spindle Speed: 12,000 rpm Power: 11 kW Torque: 57.3 Nm Tool Holder: SK-40 Tool Changer: 48 positions Equipment Bwsdpsur Nr Rjfx Ab Ujk Tool Measurement: RLP40 probe Coolant System: 15 bar Rotary-swivel Table: 5-axis simultaneous machining Machine is available only in the DACH region.

Condition: excellent (used), Year of construction: 2001, Mazak 3-axis vertical machining center in very good condition. About 8500 spindle hours and was only used for light work (machining Aluminium). Machine can be inspected under power upon appointment. Immediately available for delivery. Bwedjywhbkspfx Ab Ujk Including: High pressure pump - 15 bar cooling through spindle Chip conveyor FH 3D probe Control Mazatrol Fusion 640M Max spindle speed 10000 rpm X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Tool holder SK40 Capacity tool magazine 60 positions Table length 2000 mm Table width 760 mm Table load 1400 kg Machine weight 10500 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, total height: 2,692 mm, table load: 700 kg, overall weight: 5,500 kg, number of axes: 3, This 3-axis Mazak VTC-20B was manufactured in 1996. It features a Mazatrol M-Plus or M-32B controller, with axis travels of X=1120 mm, Y=510 mm, and Z=510 mm. The table supports up to 800 kg, and the spindle operates at speeds up to 10,000 rpm. Note: the handwheel requires repair. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Bwedpfx Aeyalicsb Usk • Size: 1460 × 510 mm • Tool magazine: 24 pocket Extra Information The handwheel is not fully operative and needs a repair. Dimensions Machine Depth 2997 mm