Used Mazak Vtc 41 for sale (337)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol 640M, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Spindle speed: 12,000 rpm Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool Changer Number of tool stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent stations: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg MACHINE DETAILS Control: Mazatrol 640M Interfaces: RS232, LAN, Floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 11,500 kg Operating Hours as of 23.05.2025 Operating hours: 6,585 h Cutting hours: 8,300 h Auto cutting hours: 8,374 h EQUIPMENT Documentation/manual Chip conveyor Relocation detector Ledpfsya Dh Rex Afzjhb Automatic tool length measurement system Preparation for partition wall for pendulum machining 4th axis Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant, 5 bar

Condition: used, YOM 2004 Mazatrol PC Fusion 640 M Axis X 1660 mm Axis Y 510 mm Axis Z 510 mm Table length 2000 mm Table width 510 mm Max. part weight 1000 kg Number of tool pockets 30 Spindle taper CAT 40 Max. spindle speed 10000 rpm Spindle motor power 18.5 kW Ljdev Ax Uyspfx Afzohb

Condition: used, Year of construction: 2018, operating hours: 12,678 h, machine/vehicle number: 290060, Weight: 16,800 kg, 48-position tool changer, travel paths (x/y(z): 4 mm, with lubricant processing, chip conveyor, cooling unit, control cabinet. ATTENTION: Collection for this item by prior arrangement only!!! Lsdpfx Afsycitkozohb

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, number of axes: 3, This 3-axis Mazak VTC-20C was manufactured in 1999. It features a vertical machining center with a table load capacity of 1,000 kg and dimensions of 510 mm by 2,000 mm. The machine offers X, Y, and Z-axis travels of 1,660 mm, 510 mm, and 510 mm respectively. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-20C machine we have for sale. Contact us for more information. Lhedoycii Espfx Afzob • Capacity: • Drilling capacity in S45 (JIS): 25 mm • Milling capacity in S45 (JIS): 165 cm³/min • Tapping capacity in S45 (JIS): M24 × P3 • Table: • Height from floor: 750 mm • Number of tables: 1 • Table length: 510 mm • Table width: 2,000 mm • T-slots (number): 5 • T-slot reference width: 18 mm • T-slot distance (pitch): 100 mm • Distances: • Spindle nose to table top: 180–690 mm • Spindle center to column: 550 mm

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table width: 820 mm, table length: 3,500 mm, table load: 2,500 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 Lhedpoxftkqefx Afzjb If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2015, number of axes: 5, This 5-axis Mazak VTC 800/30SR was manufactured in 2015, featuring a 600mm rotary table (Nikken CNC601MA), 70 bar high-pressure cooling, and a 48-tool magazine. It includes Renishaw probe preparation, RMP60Q touch probe, and CAD/CAM software TOPSOLID 7.18 with a floating license. Consider the opportunity to buy this Mazak VTC 800/30SR vertical machining centre. Contact us for more information about this machine. • 70 bar high-pressure cooling • 48-tool magazine • Center partition Additional equipment Lhjdpfjx Imq Sox Afzjb • 600 mm rotary table (Nikken CNC601MA) • Renishaw probe preparation • RMP60Q touch probe • CAD/CAM software with floating license TOPSOLID 7.18 • Post-processor for the specified machine

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, total height: 2,692 mm, table load: 700 kg, overall weight: 5,500 kg, number of axes: 3, This 3-axis Mazak VTC-20B was manufactured in 1996. It features a Mazatrol M-Plus or M-32B controller, with axis travels of X=1120 mm, Y=510 mm, and Z=510 mm. The table supports up to 800 kg, and the spindle operates at speeds up to 10,000 rpm. Note: the handwheel requires repair. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Size: 1460 × 510 mm • Tool magazine: 24 pocket Extra Information The handwheel is not fully operative and needs a repair. Dimensions Lhedpfeyalicex Afzsb Machine Depth 2997 mm

Condition: used, Year of construction: 1999, functionality: fully functional, Mazatrol PC-Fusion CNC 640 M. X = 1120 mm Y = 510 mm Z = 510 mm Table 2820 x 655 mm Table loading 800 kg Machine weight 6000 kg Cooling threw spindle. Ljdpjyctdmefx Afzjhb Including probes. Chip conveyor.

Condition: ready for operation (used), Year of construction: 2000, number of axes: 3, This 3-axis Mazak VTC-200B was manufactured in 2000 and features a rapid traverse of 36 m/min and both internal and external cooling systems. In 2019, it received a new spindle motor and spindle, along with recirculating ball screws in the X and Y axes. Consider the opportunity to buy this Mazak VTV-200B vertical machining centre. Contact us for more information. Additional equipment • chip conveyor is included Machine Benefits Qualitative Machine Benefits • 2019: new spindle motor and spindle, recirculating ball screws in x and y axes • 2024: new recirculating ball screw in x axis due to a material defect. Technical Machine Benefits • Rapid traverse: 36 m/min • Workpiece: 24-axis changer Lhsdpfxsyaaw Ue Afzeb • Tools: coolant pump: 5-bar • Tools: internal and external cooling Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion CNC 640 M, workpiece height (max.): 640 mm, table width: 655 mm, table length: 2,820 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, This 3-axis Mazak VTC-200B was manufactured in 1999. It features a Mazatrol PC-Fusion CNC 640 M control system, with X, Y, Z travels of 1120 mm, 510 mm, and 510 mm respectively. The machine includes a swarf conveyor, cooling through the spindle, and probes for tools and workpieces. Consider the opportunity to buy this Mazak VTC-200B vertical machining centre. Contact us for more information about this machine. • Workpiece probe • Table dimensions: 2820 x 655 mm • Table capacity: 800 kg • Tool probe • Cooling through the spindle • Swarf conveyor Technical Specification Lhedpfex Utwlsx Afzob Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2001, Data will follow.... Lhodpfxox Tgzne Afzjb

Condition: excellent (used), Year of construction: 2016, MAZAK vertical machining center in excellent condition. Built in 2016, first use in April 2017. Used only for occasional and simple machining tasks – just 2,500 spindle hours (!) Includes: • High-pressure coolant through spindle (15 bar) • Removable dividing wall • Mayfran chip conveyor on left side • Synchronous tapping Inspection of the machine under power is possible by appointment. Availability: end of February 2026 CNC control: Mazatrol Matrix Nexus 2 Number of axes: 3 X-axis travel: 1,740 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 12,000 rpm Lhjdpfx Aoya Etuofzsb Tool taper: CAT Number of tool positions: 30 Please note: The information provided on this page has been compiled to the best of our knowledge and belief. This information is supplied in good faith, but its accuracy cannot be guaranteed. Therefore, this information is not legally binding and does not constitute a contractual condition. We recommend that all essential details be verified during a machine inspection. To avoid unnecessary travel expenses for our customers, we generally recommend arranging a live video inspection.

Condition: used, Year of construction: 2019, MAZAK VTC 800/30SR Table size (clamping surface): 3,500 x 820 mm Travel X-axis: 3,000 mm Travel Y-axis: 800 mm Travel Z-axis: 720 mm Rapid traverse X/Y/Z: 50 m/min Lhodjxqhxmjpfx Afzob Max. spindle speed: 18,000 rpm Spindle taper: SK 40 Machine is equipped with: - CNC controller Mazatrol SmoothX - Tool magazine with 48 tool places - Through-spindle cooling - Preparation for Monitoring B-System RMP60 - NC rotary table - Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 400 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 760 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 1,020 x 410 mm Max. table load: 400 kg Spindle speed: 8,000 rpm Tool holder: CAT 40 / BT 40 Tool changer: 20 positions Accuracy Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Lhedpfx Asya Dw Sjfzob MACHINE DETAILS Control: MAZATROL M-PLUS EQUIPMENT Robust construction Fully hydraulic table Stable cast iron structure Suitable for aluminium, steel and plastics User-friendly programming Integrated simulation and diagnostic software Regularly serviced Coolant and lubrication systems intact

Condition: repair required (used), Year of construction: 2002, operating hours: 6,000 h, functionality: not functional, machine/vehicle number: 158187, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller manufacturer: Fusion 640M, number of spindles: 1, number of slots in tool magazine: 30, Machine = Mazak VTC-300-C II Year of manufacture = 2002, Operating hours according to spindle monitor = 47,961 hours, new spindle has been installed, now with 4,770 hours. Control = Fusion 640 M Travel distances: X-axis = 1,740 mm, Y-axis = 760 mm, Z-axis = 840 mm Spindle = SK-40, 12,000 rpm Tool magazine capacity = 30 stations Equipped with Renishaw probe Machine dimensions: Length = 4,150 mm + 1,260 mm chip conveyor, Width = 3,300 mm, Height = 3,100 mm The machine is currently defective and is suitable either for repair (costs approx. €8,000) or for dismantling for parts. Lodpfsx U A Elsx Afzshb For further questions, please call or email.

Condition: good (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, STANDARD TECHNICAL SPECIFICATION – MAZAK CAPABILITIES Table work surface (length): 2,500 mm Table work surface (width): 820 mm Longitudinal (crosswise) X-axis travel: 2,000 mm Column (crosswise) Y-axis travel: 800 mm Spindle head (vertical movement) Z-axis: 720 mm Minimum distance from spindle nose to top of table: 140 mm Maximum distance from spindle nose to top of table: 860 mm Table load capacity (uniform load): 1,700 kgf Spindle head rotation (B-axis): ± 110° SPINDLE HEAD Spindle taper: 7/24 taper, No. 40 Maximum spindle speed (standard): 18,000 min⁻¹ Minimum spindle speed (standard): 35 min⁻¹ Main spindle motor output (continuous rating): 26.0 kW FEED RATES Rapid traverse (X-axis): 50 m/min Rapid traverse (Y-axis): 50 m/min Rapid traverse (Z-axis): 50 m/min TABLE Table length: 2,500 mm Table width: 820 mm T-slot width: 18 mm Number of T-slots: 7 Distance between T-slot centers: 100 mm Height from machine base to table surface: 870 mm AUTOMATIC TOOL CHANGER Tool storage capacity (standard): 30 Tool storage capacity (optional): 48 Tool selection: Mazatrol memory random access type Tool shank: CAT-40 / MAS BT-40 Max. tool diameter with adjacent tools: 80 mm Max. tool diameter without adjacent tools: 130 mm Max. tool weight (with holder & taper pin): 8 kgf Max. total tool magazine weight: 150 kgf Max. tool length (from gauge line): 350 mm Tool change time (chip-to-chip): 4.7 s MACHINE DIMENSIONS Machine height (from floor): 3,355 mm Machine width: 4,250 mm Machine depth: 4,046 mm Machine weight: 14,000 kg OTHER Power supply voltage: AC380/400/415V ±10% Power supply frequency: 50/60 Hz ±1 Compressed air pressure: 0.5–0.9 MPa Compressed air capacity: 260 l/min Coolant tank capacity: 450 L STANDARD MACHINE EQUIPMENT – MAZAK GENERAL MACHINE OPTIONS Foundation kit (base bolts & plates) One set of adjusting tools Work area lighting Power transformer for European market USB I/F (1 port) MANUALS, DOCUMENTATION One set of documentation (CD) SPINDLE SPEED Spindle speed: 18,000 rpm (#40) MACHINE FRAME COLOR Mazak standard color (F white / S black) SAFETY, HEALTH Global safety measures Work area door interlock with locking switch Full machine enclosure Full-cover chip and coolant protection TOOL MAGAZINE 30-position tool magazine COOLING SYSTEMS Complete cooling system HIGH PERFORMANCE/HIGH PRESSURE COOLANT Through-spindle coolant (5 bar, 71 PSI) Ljdpjya Hngofx Afzjhb PRODUCTION AUTOMATION SYSTEMS Automatic ON/OFF + warm-up MEASURING SYSTEMS Automatic tool length measurement & tool breakage detection POSITIONING SYSTEM Absolute positioning system CHIP CONVEYOR Preparation for chip conveyor (left side) NC CONTROL UNIT – 15 Functions 19" color LCD (touch screen) 3-D coordinate conversion Position sensor B) Shape compensation for rotary axes EIA/ISO code input function (standard) Background tool path check LAN connection High smoothing control Mazak 2D software (shape compensation) Mazak 3D high-speed software package Mazak thread tapping / pre-tapping Tornado (Mazatrol) Mazatrol SmoothX CNC Movable control panel SD memory I/F (1 slot) + USB I/F (1 slot) Smooth standard software

Condition: ready for operation (used), Year of construction: 2016, operating hours: 16,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,376 mm, table load: 2,500 kg, overall weight: 16,300 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 33,000 W, tool weight: 8,000 g, product length (max.): 5,480 mm, number of axes: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table top: 140 mm • Max. distance spindle nose to table top: 860 mm • Work spindle • Steep taper tool holder (40° taper not included when ordering 155 HSK tools) • Feed rates • Rapid traverse speed X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm Lhodpfox Nkp Usx Afzob • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • With adjacent positions occupied: 80 mm • With adjacent positions free: 130 mm • Total weight of all magazine tools: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Connection frequency: 50/60 +1 Hz • Air pressure: 5–9 bar • Air flow rate: 260 l/min • Tank capacity: 500 L Additional equipment • AirFresh FMN V12 extraction system (installed on both sides and connected to a door sensor) • Mounting bracket for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetting devices • Spare parts: • Y-axis motor for tool magazine • Linear axis shifter motor • Rotary axis shifter motor • Cylinder for swivel unit

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 175849, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller model: PC Fusion 640 M, total height: 4,450 mm, total length: 3,300 mm, total width: 2,900 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center MAZAK - VTC 300C-II Manufacturer: MAZAK Model: VTC 300C-II Control: PC Fusion 640M Lhjdpfx Afsyanuhezeb Year of manufacture: 2005 Internal coolant supply (IKZ): 15 bar Table length: 2000 mm Table width: 760 mm Feed rate X-axis: 36,000 mm/min Feed rate Y-axis: 36,000 mm/min Feed rate Z-axis: 36,000 mm/min Tool holder: SK 40 Spindle power: 15 kW Spindle speed: 12,000 rpm Tool changer: 30 positions Internal coolant: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 4450 mm Width: 3300 mm Height: 2900 mm Can be inspected under power.

Condition: used, Year of construction: 2016, The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options: Tool magazine for 30 tools Tool length measurement, tool breakage detection Factory-installed preparation for chip conveyor (left) Magazine (HSK) for 155 tools Air blower at the workpiece Signal light (end of machining: yellow) Additional: Work area lighting Coolant gun Air blower through the spindle 70 bar preparation, including interface for high-pressure system Automatic opening/closing of the operator door Mazak Monitoring System B RMP 60 (only/H/V) Collision monitoring by Brankamp 2 Renishaw TS27R tool presetting devices NC rotary table Holding device for vertical use of the NC rotary table Table center partition for pendulum machining 3D model of the work area in STEP format Ljdpfx Asx Idwiofzjhb 5-axis milling technology Knoll compact filter KF400/2300 (filtration capacity 400 l/min, tank volume 2300 l/min) 1) High-pressure cooling 70 bar, 7 pressure stages Chip conveyor, hinged belt design Additional M-codes: 1 set = 2 M-codes Preparation for dual extraction system (mechanical nozzle) 0.198 mm Transformer for the European market 1 set of manuals in electronic form on CD 1 set of adjustment tools Foundation set (anchor bolts + plates) MAZAK standard paint Work area lighting Additional items: AirFresh FMN V12 extraction system (installed on both sides and coupled with a door sensor) Holding device for vertical operation of the rotary table 2 x Renishaw TS27R integrated tool presetting devices Spare parts: Y-axis motor, tool magazine Linear axis shifter motor Rotary axis shifter motor Cylinder for swivel unit width: 3500 mm length: 820 mm X-axis travel range: 3000 mm Y-axis travel range: 800 mm Traversal range Z-axis: 720 mm min. distance spindle nose to table top: 140 mm max. distance from spindle nose to table top: 860 mm max. table load: 2500 kgf B-axis: ± 110 degrees Working spindle steep taper mount: Steep taper 40 collapses under load 155 tools HSK Max speed: 18,000 RPM Min. Drehzahl: 35 min-1 Rated power: ( 100 % continuous operation) 33,0 kW Emergency travel speed X-Y & Z axis: 50 m/min Working table width: 3500 mm Worktable length: 820 mm Width of T-slots: 18 mm Number of T-slots: 7 Distance of T-slots: 100 mm Table height from the floor: 870 mm Tool changer number of tool places (Standard): 30 Number of tool stations (optional): 48 Tool selection method: shortest path tool shank: Steep cone 40 With occupied side positions: 80 mm With available spaces: 130 mm max. tool weight: 8kgf Total weight of all magazine tools: 150 kgf max. tool length: 350 mm Tool change time: (Span-to-Span) 4.7 s Connected load: 400 V / 50/60 Hz Air pressure: 5 – 9 bar Air volume: 260 l/min Tank capacity: 500 l Dimensions (Height x Length x Width): 3376 x 5480 x 4051 mm Weight approx: 16300 kg colour: Gray / Black

Condition: ready for operation (used), Year of construction: 2012, Control Unit Lhsdpfxjx D I A Sj Afzjb Brand SIEMENS Model 840 D Main Drive Number of axis 4 This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Model 840D Lhjdpfx Afox D I A Eszsb Main Drive Number of axis 5 This 5-axis Mazak VTC 800/30SR was manufactured in 2014, featuring a robust 155-tool ATC, 15 bar through-spindle coolant, and a KUKA robot for enhanced automation. It includes a technology package for 5-axis milling and a robot interface, making it ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand MAZATROL Model 640M General Data Measurements width 3485 mm Lhjdpex D Ifyofx Afzob Measurements depth 4424 mm Measurements height 3442 mm Machine weight 11500 kg Main Drive Spindle speed range 40 - 12000 Number of axis 3 Movement X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Table Outer length 2000 mm Outer width 760 mm Table load 1400 kg This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2006, Table size 2000 x 510 mm, Traverses XYZ 1660 x 510 x 510 mm, Ledpfx Aewaidlsfzshb Table load 1200 kgs, Spindle taper Din 40, Spindle speed 12000 rpm, 30 ATC, Mazatrol 640M control, through spindle coolant, swarf conveyor, 4th axis rotary table.

Condition: good (used), Year of construction: 2014, Table size 3500 x 820 mm, Ljdpfx Afow Nwt Eszohb Traverses XYZ 3000 x 820 x 720 mm, Table load 2500 kgs, Spindle taper Din 40, Spindle speed 12000 rpm, spindle power 22Kw, 30 ATC, Mazatrol Matrix Nexus control, through spindle coolant, swarf conveyor

Condition: good (used), Year of construction: 2016, Table size 2500 x 820mm, Traverses X Y Z; 2000 x 800 x 720mm, spindle to table min-max 140 – 860mm, 35KW spindle power, spindle speed 18,000rpm, spindle taper BT 40, 30 station ATC, B axis -/+ 110 degrees, C axis 0.001 degrees, Mazatrol Matrix 2 control, swarf conveyor, through spindle coolant, 4th axis. Lhjdpfovvt T Dsx Afzeb