Used Hedelius for sale (41)

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Siemens Sinumerik 840D, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,300 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle speed range: 50 - 18,000 rpm Godpfx Absyfq T Deroin Tool holder: HSK 63 Tool positions: 30 Table size: 1,400 mm x 750 mm (right side) MACHINE DETAILS Control: Siemens Sinumerik 840D EQUIPMENT NC rotary table 800 (left side) Chip conveyor Internal coolant supply (IKZ)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 026694, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530i, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,200 mm Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK40 Speed: 50 – 12,000 rpm Number of tools in magazine: 30 pcs Table clamping surface: 3,900 x 750 mm Rapid traverse x/y/z: 12/12/12 m/min MACHINE DETAILS Gsdpfx Ajyg D Evsbroin Control: Heidenhain iTNC 530i Total power requirement: 29 kW Dimensions & weight Space required: approx. 7,200 x 3,500 x 3,100 mm Machine weight: approx. 15,000 kg EQUIPMENT Chip conveyor 30-position tool changer High-pressure belt filter system Through-spindle coolant (IKZ) 15 bar SK40 tool holders Operating manual

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Gisdpfsyh U E Hjx Abren Hours spindle 10.304 Closed housing with automatic top door IKZ Coolant system LTA Air Cleaning Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, Technical details: x-travel: 3500 mm y-travel: 1000 mm z-travel: 750 mm control: Heidenhain TNC 460 table surface area: 4150 x 1000 mm table height over floor: 950 mm Workpiece weight approx.: 4000 kg distance spindle /table: 120-870 mm spindle taper ISO: 50 tool diameter: 100 mm no. of tools in magazin: 30 Tool diameter with no neighbouring tools: 125 mm tool length - max.: 330 mm Spindle RPM: 20-8000 1/min Spindle power: 50 kW feed speeds: 1- 15000 mm/min rapid traverse: 30 m/min weight of the machine ca.: 21 t dimensions of the machine ca.: 8 x 4 x 3,7 m total power requirement: 40 kW Accerories Godpfeyi Dxzsx Abrein Electronic handwheel large vertical machining center with CNC HEIDENHAIN TNC 426 control and hand wheel HR410 30-pockets autom. toolchanger coolant system and chip conveyor additional fixture bridge on machine table *

Condition: used, Year of construction: 1998, x-travel 1700 mm y-travel 400 mm z-travel 400 mm table surface area 2x 1100 x 420 mm table load 500 Kg tool taper SK 40 control Sinumerik 810 D Siemens Gedpjxddq Sofx Abrein turning speed range - spindle 30 - 6000 U/min tool piece magazine with 20 Plätzen Working speed 1 - 30000 mm/min rapid traverse x / y / z axis 30 / 30 / 30 m/min total power requirement 20 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,8 x 2,8 x 3,1 m

Condition: ready for operation (used), Year of construction: 1999, x-travel 1800 mm y-travel 520 mm z-travel 520 mm control iTNC 426-M spindle speed: 8000 UpM table-size 2300 x 420 mm rapid travel x/y/z 30 m/min tool taper SK 40 table load 3 t tool piece magazine with 30 Plätze Giedoxg R Hrepfx Abrsn spindle drive 22 kW max. torque on the spindle 220 Nm weight of the machine ca. 5,5 t dimensions of the machine ca. 3 x 5 m Hedelius 3-axis vertical machining center, model CB 50-1800, with Heidenhain iTNC 426-M control. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2020, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2020 Control : Heidenhain TNC 640 Speed : 18000 rpm Movement X/Y/Z : 500/550/550 mm Tool holder : HSK-A63 Spindle: Technology:Motorspindle Speed:18.000 rpm Gjdpfsykdu Eox Abrsin Power (max.):35 kW Torque (max.):136 Nm Taper:HSK-A63 NC-Swivelroundtable: Technology:Swivelroundtable with hydraulic clamping A-Axis:-115°/+30° C-Axis:360° Clampingsurface:ø500 x 430 mm Tableloading (max.):300 kg In general: Toolmagazine I:Chainmagazine, 55 stations Toolmagazine II:Standbymagazine, 180 stations Rapid travers in X/Y/Z:40 m/min Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 25 bar Workpiecemeasurement:Touchprobe, m&h 25.50 Toolmeasurement:Laser, BLUM LC 50 Automation:Robotcell, BMO Automation Platinum 50 Sideloader Oilmistseparation:Electrostatic extraction, LTA 500 Setup operations:Electronic handwheel Further Equipment:Spindlechiller, Rinsing pistol Further Accessory:4 pieces Pallets 395 x 395 mm with clamping devices

Condition: good (used), Year of construction: 2012, - Heidenhain iTNC 530 MC 422 control - Integrated rotary-swivel unit and fixed machine table - 5-axis simultaneous machining - Clamping area, rotary table Ø600 mm - Travel distances: X=1320 mm, Y=650 mm, Z=520 mm - Spindle speed up to 14,000 rpm - Tool holder SK 40 DIN6987 - 30-position tool changer Gijdpfx Abjyialboron - IKZ – high-pressure coolant system - Electronic touch probe - Toolsetter M&H 35.70 - Work area partition wall - Full enclosure - Chip conveyor - 2 chip carts - Workbench with hand tools - Steel sheet cabinet - Approx. 90 various tool holders - Various accessories and spare parts - Documentation

Condition: used, Year of construction: 1998, functionality: fully functional, Manufacturer/Model: MÖSSLANG DK 101-52 Year of manufacture: 2012 Condition: Very good Location: Germany Delivery/loading possible. Chip conveyor type KB300BC 40 Gisdpfxsyi U Tps Abron Z travel: 400 mm Max. workpiece weight between centers: 500 kg X travel: 1700 mm Y travel: 400 mm Control: Heidenhain TNC 410 Table size (L x W): 1100 x 420 mm Taper: 69871 A 40 Tool changer positions: 20 Spindle power: 16.25 kW Speed range: 10–6000 rpm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 7,647 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,500 W, tool weight: 10,000 g, number of axes: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006, featuring a robust vertical machining center design. It boasts a large travel range of 2300/800/850 mm and a high spindle speed up to 12,000 rpm. The machine includes a B-axis NC swivel head, a 40-position tool magazine, and supports a maximum workpiece weight of 2500 kg. Consider the opportunity to buy this HEDELIUS T8 - 2300 vertical machining center. Contact us for more information. • NC swivel head B-axis: +92° / -92° • Max pendulum operation: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5000 N, Z 9000 N • Spindle: • Max torque: 158 Nm • Front spindle bearing diameter: 70 mm • Tool clamping (pull-in force): 12 kN • Tool magazine/changing: • Tool positions (standard): 40 • Tool positions (Magnum): 80 • Max tool diameter: 125 mm (180 mm with adjacent positions empty) • Max tool length: 330 mm • Tool change time (approx.): 3.5 s • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table/capacity: • Fixed table (L×W): 2000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2500 kg • Machining capacities: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Distances (reference): • Z travel vertical (L2): 850 mm • Spindle nose to swivel axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z travel horizontal (L5): 1000 mm • Spindle axis to table surface (L6): 210 mm • Y travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power/weights: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000–17,500 kg • Hours: • Operating hours: 21,100 h • Spindle hours: 7,647 h Additional equipment • Chip conveyor • Internal coolant through spindle, 40 bar Gisdeyfiapepfx Abrsn • Paper belt filter • Oil and emulsion mist separator • Rotating viewing windows (2) • Cleaning guns (2) • Renishaw touch probe Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, Immediately available due to business liquidation: Hedelius CNC travelling column machining centre Type CB 80 – 2300 Year of manufacture: 2003 CNC control: Heidenhain iTNC 530 Very few spindle hours: 11,500 h Gedpfsyitmhjx Abrsin Table: 2900 x 750 mm Travel (X/Y/Z): 2300 / 800 / 600 mm Table load capacity: 2800 kg Distance spindle to table: 10 – 740 mm Spindle: SK 40 Tool magazine: 30 stations Spindle speeds: 30 – 8000 rpm Feed rates: 0 – 3000 mm/min on all axes Drive power: 25 kW Weight: 13 t Price: EUR 24,000 plus VAT ex location

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 520 mm, CNC control Heidenhain iTNC530 NC rotary tilt table right Fixed table on the left 30-fold tool changer el. handwheel IKZ (20 bar) chip conveyor Technische Daten / technical details: Travel X/ X-travel 1200 mm Traverse path rotary swivel range in X / X-travel rotary swivel side 500 mm X-travel fixed machine table area in X / X-travel fixed table side 570 mm Travel distance Y / Y-travel 650 mm Z-travel 520 mm A-axis / A-axis +90 / -110 ° C-axis / C-axis 360 ° Spindle taper SK40 Drehzahlbereich / spindle speed 30-8000 rpm Feed rate / infeed 0-45000 mm/min Schwenk-Rundtischababmaßen / swivel rotary table dimensions 520 x 420 mm interfering edge diameter 610 mm / interfering edge diameter 610 mm Höhe des Stützlageres / height of the support bearing 90 mm Fester Tisch Abmaße / fixed table dimensions 700 x 600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 30 Antriebbleistung / drive capacity 22 kW Gewicht ca. / weight 8500 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding. Giedpfx Ajtu S Irebren

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Godpeycpx Hjfx Abrjin Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10624 Manufacturer: HEDELIUS Type: RS 100 MAGNUM Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN 530i Storage location: Halberstadt Country of origin: Germany Godpfsya Dbkjx Abrsin X-Travel: 3500 mm Y-Travel: 1000 mm Z-Travel: 770 mm Main spindle drive power: 55 kW Table Load: 4000 kg Max. Tool Weight: 20 kg Max. Tool Length: 330 mm Max. Tool Diameter: 125 mm Tool Taper: SK 50 Tool Piece Magazine With: 50 Pcs./pcs. Turning Speeds: 6000 RPM Feed Speeds X/Y/Z Axis: 30000 mm / min

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex location: Hedelius CNC machining center Type BC 100 – 3500 Year of manufacture: 2000 Heidenhain TNC 426 Gijdjyg Nhpspfx Abrsn Traverses X/Y/Z 3500/1000/770 mm SK 40 Celox spindles Diebold SK 40 Spindle speeds up to 15,000 rpm Automatic tool changer with 40 positions Chip conveyor Extraction unit Weight: 24 t Price: EUR 24,000 excluding VAT, ex location

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, operating hours: 56,860 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, number of slots in tool magazine: 30, controller manufacturer: Siemens, controller model: 840 D, operating hours of spindle: 28,100 h, The machine can be inspected under power at any time. The spindle was replaced at approximately 5,500 hours. The control system was replaced, PCU50, in March 2024. Our Hedelius is in very good condition. Giodpfx Asvncmksbrjn

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, Full enclosure with vacuum extraction Roller shutter door for crane loading Pick-Up station for 3 angled milling head  Face machining possible to generously sized areas Distance spil to table 140 - 740 mm Pendel screen for splitted manufacturing Coolant tank filtration 350 Liter HR410 Handwheel HeidenHain Double LTA Oil Mist   Flexible, high-precision machining of large and complex parts, with reliable German build quality. X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6200mm Width: 3500mm Gisdpfx Abjx Sxx Njron Height: 3600mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, travel -x axis 1800 mm travel -y axis 520 mm travel -z axis 520 mm tool taper SK 40 table load 3 t tool piece magazine with 30 Plätze spindle drive 22 kW max. torque on the spindle 220 Nm *Machine in very good condition* + Loading door windows have been replaced + Linear guide carriages on X and Y axes have been replaced - Heidenhain iTNC 426-M control system Gjdpsvh R Txefx Abrjin - Partition wall for pendulum operation - Chip conveyor - Filter system - Spindle up to 8000 rpm - Rapid traverse x/y/z: 30/30/30 m/min - Year of manufacture 2001 Control on: 93212:52:14 Machine on: 82284:39:36 Program run: 42385:36:11

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm Godpfxeulnbke Abrein control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: used, Year of construction: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control Heidenhain TNC 640 swivelling range -98 bis 98 Grad rotary table dia. 750 mm total power requirement 29 kW weight of the machine ca. 16 t Hedelius traveling column machining center Tiltenta 7 Magnum with continuously swiveling main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-fold tool magazine and NC rotary table integrated into the fixed machine table. Machine equipment: T7M-3200, operating mode 3 Giodpfxewfqqks Abron -Pressure booster pump 50 bar -Heidenhain TNC 640-T series -Spindle speed 12000 rpm/29.0 kW -Extended swivel range TNC/T -HR 510 handheld control unit -SK40/190 standby magazine -Cone cleaning station -900 l slant bed coolant system -25 bar internal coolant supply -Slant bed coolant system prefilter -Electrostatic exhaust air filters T / 2x1300 -Compressed air nozzle on spindle head -Internal compressed air supply -Blow-off guns -Rinsing guns -Infrared receiver M&H 91.40 -3D infrared measuring probe M & H 25.50 -Toolsetter M&H 35.70 -Workspace partition T7 with slider Control on: 33163:56:22 Machine on: 24185:07:21 Program run: 16784:12:57 Spindle: 11751.13.08

Condition: used, Year of construction: 2010, travel -x axis 1.000 mm travel -y axis 510 mm travel -z axis 480 mm travel of - x axis (rotary-tilting table) 420 mm travel - x axis (fixed machine table) 450 mm Gisdpfx Aox R U Rxebron control HEIDENHAIN iTNC 530 turning speed range 50 - 12.000 U/min numbers of positions in the tool changer 20 tool taper SK40 table surface area 650 x 510 mm workpiece weight 300 kg Clamping surface of rotary-tilting table 420 mm workpiece weight 200 kg speeds of rotary table 30 U/min 5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit. With only 9,787 spindle hours, the unit shows low operating time. The machine is in a well-maintained condition and can be inspected at any time under power. A machine video can be provided on request. Please refer to the offer attachment for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS505 K IC 40 | RS-505 | RS 505

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Giedpfex Sw I Aox Abron Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Giodex Sw Hfjpfx Abren Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: used, HEDELIUS RS 60 MAGNUM-2000 is a 5-axis machining center engineered for precision, high accuracy and reliable performance. Working capacities: table 1,200 x 600 mm (Ø 680 mm), table load max 300 kg; travels X 2 mm, Y 620 mm, Z 520 mm, swivel A +15 / -95°. Main specs: spindle nose SK40, speed 50–12 rpm, torque 121 Nm; feed 0–45 mm/min, rapid 45 m/min, max feed force 7 N; supply 3x400 V 50 Hz, total power 25 kVA; machine weight ≈11 kg, dimensions 5,400 x 4,300 x 3 mm; tool change 3 s, tool Ø max 80 mm, length 330 mm, weight 8 kg. Equipment: 56-place tool magazine, 1,250 l coolant, 80 bar high-pressure coolant, Renishaw probe, chip conveyor, oil-mist extractor, switch-cabinet AC, full enclosure. Delivers tight tolerances; suited to automotive, aerospace, medical, watchmaking and machine-building. Gsdpfx Ajx S Nwvjbroin

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 3,220 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, number of slots in tool magazine: 55, total height: 3,600 mm, total length: 7,500 mm, total width: 4,200 mm, overall weight: 15,500 kg, table length: 3,900 mm, table width: 750 mm, controller model: Heidenhain, distance table center to spindle nose: 720 mm, spindle motor power: 35 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 30 rpm, table load: 3,500 kg, tool diameter: 80 mm, tool length: 330 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with traveling column "HEDELIUS mod. CB80 MAGNUM" with Heidenhain TNC-530 Godpfx Abov Sdc Usroin