Used Mazak H 500 for sale (340)

Condition: used, Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (min.): 3,300 rpm, spindle bore: 104 mm, travel distance X-axis: 870 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 1,598 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, Equipment: rotational speed infinitely variable, MAZAK CNC Turning Machine MODEL: INTEGREX e-500 HS /U1500 with Mazatrol 640M PRO Control for sale. The machine is in good condition and can be inspected under power on site. The machine maintenance can be documented. In 2025, the X and Y axes were replaced. The milling spindle and gearbox were replaced in 2024. Technical Data - Max. swing diameter: 820 mm - Max. turning diameter: 820 mm - Max. turning length: 1524 mm Main spindle: - Speed range: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Spindle bore: 104 mm - Indexing: 0.0001 Sub spindle: - Speed: 0-3300 rpm - Drive power: 30 kW / 22 kW - Max. torque: 588 Nm - Spindle nose: A2-11" - Indexing: 0.0001 Milling spindle: - Drive power: 37 kW - Max. torque: 260 Nm - Speed range: 0-10,000 rpm - Tool holder: SK50 Tool magazine: - Number of tool pockets: 120 Travel: - X: 870 mm - Z: 1598 mm - Z2: 2458 mm - Y: 500 mm - B axis: -30 to 210°, 0.0001° Feed rate: - X/Y/Z: 40 mm/min Fjdpfox Syldox Ag Tspb Machine data: - Connected load: 104 kVA - Operating voltage: 400V / 50 Hz - Required footprint (L x W): 7 x 3.5 m Special accessories: - 120-position tool magazine - High-pressure coolant 70 bar - Renishaw - Laser measurement system for rotating tools - Interface set - Air/water through-spindle cooling - Overload monitoring system - Mayfran Consep 2000 chip conveyor - SMW quick-change chuck

Condition: good (used), Year of construction: 2005, Tool holder BT 40, 12.000 rpm, 60 tool places in tool changer, 70 bar IKZ, laser Renishaw OMI-2. Fpjdowbaqljpfx Ag Tob Parts shown by hand not come.

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Fpedpoi Eb Drjfx Ag Tsb

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm Fodpfev Dxw Rsx Ag Topb power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: defective spare-parts repository (used), Year of construction: 2003, functionality: not functional, travel distance X-axis: 430 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, nominal power (apparent): 15 kVA, torque: 9 Nm, controller manufacturer: MAZAK, controller model: IMAC-TP, total height: 2,400 mm, total length: 1,744 mm, total width: 1,350 mm, rotational speed (min.): 30 rpm, rotational speed (max.): 10,000 rpm, overall weight: 2,000 kg, number of slots in tool magazine: 10, Equipment: documentation/manual, rotational speed infinitely variable, Mazak IMPULSE 30H CNC Milling Machine – Defective For sale is a Mazak IMPULSE 30H CNC milling machine. The machine is defective and is expressly being sold as non-operational. Ideal for repair, parts recovery, or export. _____ Technical Specifications: • Manufacturer: Mazak • Model: IMPULSE 30H • Type: CNC machining center • Spindle speed range: 30 – 10,000 rpm • Spindle taper: BT30 • Tool changer: 10 positions • Rapid traverse: 24 m/min Fodpfxjx H Auws Ag Tepb Travel distances: • X-Axis: 430 mm • Y-Axis: 300 mm • Z-Axis: 250 mm Dimensions & Weight: • Dimensions (L × W × H): 1350 × 1744 × 2400 mm • Machine weight: approx. 2,000 kg _____ Condition / Fault Description: • Controller powers up • An error message appears afterward • Machine cannot be started / cannot be operated • Cause of defect unknown, no further diagnosis carried out _____ Sales Information: • Sale as-is, without vise, holders, or tools • No warranty or guarantee • Inspection by appointment possible and recommended • Collection and transportation by the buyer Price: Negotiable If interested or if you have any questions, please get in touch.

Condition: used, Year of construction: 2016, travel -x axis 350 mm travel -y axis 550 mm travel -z axis 510 mm travel -A axis -120 / +30 ° c-axis 360 ° control MAZATROL Matrix Nexus 2 number of spindle speeds 12.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 weight of the machine ca. 7,0 t 5-axis machining center | MAZAK - VARIAXIS j-500 equipped with internal coolant supply (15 bar) , a swivel axis, and a rotary table (ø 500). The machine has only approx. 4.000 H spindle hours. The machine is in a very well-maintained condition. A machine video from the production plant will be shared on request. Fodjw Ahywspfx Ag Tepb Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VARIAXIS j500 | VARIAXIS j 500 | VARIAXISj500

Condition: ready for operation (used), Year of construction: 2019, Main Drive Spindle speed range 35 – 12000 Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Fpodpex D Hx Eofx Ag Tjb Table Table load 300 kg This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Equipment: chip conveyor, Chip conveyor Through-spindle coolant 20 bar 3-color signal lamp Fsdpfxoxx T Dqs Ag Topb Electronic handwheel Performance package

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Fpsdoi Eb Dnopfx Ag Tob

Condition: used, Year of construction: 2008, functionality: fully functional, Mazak Quick Turn Nexus 250 II Universal 500 CNC Lathe (2010) Manufacturer: Mazak Type: Quick Turn Nexus 250 II Universal 500 CNC Lathe Year of manufacture: 2008 Commissioning: 09/2010 Control system: Mazatrol Matrix Nexus Condition: used, under power, in production Speed 4000 rpm Spindle nose A2-8″ Spindle bore 88mm Power (30min operation) 26KW Chuck diameter 10″ Max. Swing diameter 610mm Max. Machining diameter 350 mm Turning length 475 mm Rapid traverse X-axis 30.0 m/min Rapid traverse X-axis 30.0 m/min X-axis travel 190 mm X-axis travel 515 mm Tailstock holder MK5 Tailstock travel 525 mm Number of tools 12 Turret indexing time 0.2s Fjdoxnnfnepfx Ag Topb Length 2473mm width 1780mm Height 1840mm Weight approx. 5000kg Scope of delivery - 1 set of manuals - Machine feet - Automatic parts catcher Conveyor belt - Chip conveyor Hinged belt - Chip chuck - 6x tool holder - High pressure pump 20 bar - Tailstock programmable with M-code - Tool eye - Bar feeder prepared - Automatic machine switch-off Note: without LTA oil mist extraction system

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs Fpsdex Adn Uspfx Ag Teb ATC Tool Change Capacity : 40 Tools (CAT40) CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece diameter (max.): 500 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel paths: X-axis: 510 mm Y-axis: 510 mm Z-axis: 460 mm Fsdsxldrxepfx Ag Tjpb Workpiece dimensions: Maximum diameter: 500 mm Maximum height: 405 mm Table: Number of tables: 1 Table diameter: 500 mm Table width: 400 mm Maximum table load capacity: 300 kg Number of T-slots: 5 T-slot width: 80 mm Reference slot: 50 mm Table height: 800 mm Distance spindle nose – table, max.: 650 mm Distance spindle nose – table, min.: 190 mm Distance spindle nose – table center, max.: 600 mm Distance spindle nose – table center, min.: 140 mm Speeds: Rapid traverse X-axis (max.): 50 m/min Rapid traverse Y-axis (max.): 50 m/min Rapid traverse Z-axis (max.): 50 m/min Feedrate X-axis (max.): 50 m/min Feedrate Y-axis (max.): 50 m/min Feedrate Z-axis (max.): 50 m/min Spindle: Maximum speed: 12,000 rpm Minimum speed: 35 rpm Spindle motor (15 min): 22 kW Spindle motor (continuous): 15.0 kW Maximum tool diameter with adjacent tool: 80 mm Maximum tool diameter without adjacent tool: 125 mm Maximum tool length: 300 mm Tool change time (C/C): 4.5 s MACHINE DETAILS Electrical supply: Power (30 min): 66.6 kVA Power (continuous): 49.9 kVA Compressed air supply: Pressure: 500 kPa Flow rate: 200 l/min Cooling system: Total tank volume: 300 l Dimensions & Weight: Dimensions (L x W x H): 3,015 x 2,805 x 2,964 mm Weight: 7,600 kg EQUIPMENT Operator door lock with switch Full enclosure Top cover Transformer for Europe (CE) Ball screw cooling (X, Y, Z) Automatic tool measurement & Mazatrol PC-FUSION-CNC 640M 5X control Additional variables (600) Mazak Tornado thread cutting-drilling Mazatrol Mazak Tornado thread cutting-drilling (EIA) Intersection calculation between 2 lines Zero offset Reverse execution of commands G37 automatic tool length measurement Sequence comparison function RS-232C interface Mazacc 2D high-speed software Additional coordinate system (G54.1) Thread cutting function Machining navigation – forecast Machining navigation – control Machining navigation – results PCMCIA interface (2 slots) IC memory card interface Complete coolant system Lighting Manuals Note: The machine has not been used for 2 years, but was running smoothly up to that point. Pallets are included in the scope of sale and delivery. Tools and tool holders are not included in the scope of sale and delivery.

Condition: good (used), Year of construction: 2013, operating hours: 40,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL Matrix Nexus 2, spindle speed (min.): 12,000 rpm, coolant supply: 15 bar, spindle nose: SK40, number of slots in tool magazine: 30, Equipment: chip conveyor, rotational speed infinitely variable, Machine with automation, 48 pallets, 50 kg Fanuc robot. Fjdpfxsxf Trne Ag Topb

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,019 h, functionality: fully functional, machine/vehicle number: 278346, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel and Axes X-Axis: 350 mm Y-Axis: 550 mm Z-Axis: 510 mm A-Axis: -120° / +30° C-Axis: 360° Rapid Traverse Speed XYZ: 30 m/min Clearance under Spindle: 50 mm ∼ 560 mm Fsdew Nv Tkopfx Ag Tjpb Spindle Spindle Motor Power: 11 kW Spindle Speed: 12,000 rpm Table Table Size: 500 x 400 mm Max. Workpiece Weight: 200 kg Tool Data Maximum Tool Diameter: 90 mm Maximum Tool Diameter with Adjacent Pockets Empty: 130 mm Maximum Tool Length: 300 mm Tool Positions: 18 stations Tool Change Time (chip to chip): 6.2 s MACHINE DETAILS Control: Mazatrol Smooth Dimensions Machine Dimensions (L x W x H): 3,226 x 1,900 x 2,840 mm Weight: 6,900 kg Operating Hours Machining Hours: 11,019 h Power-On Hours: 29,233 h EQUIPMENT Oil Mist Separator Through-Spindle Cooling Renishaw Probe

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK 40 - Spindle power : 12 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 510 x 510 x 460 [mm] A ROTARY AXIS - Travel : [°] - Indexing precision : 0,001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 400 x 400 [mm] - Maximum weight upon table : 300 [kg] - Max. turning diameter : 500 [mm] - Max. machining height : 405 [mm] PALLET CHANGER - Pallet size : 400 X 400 [mm] - Pallets number : 2 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kVA] WEIGHT & DIMENSIONS - Machine weight : 11500 [kg] MACHINE HOURS - Number of working hours : 32763 [h] EQUIPMENT - CNC : Mazatrol PC-Fusion 640 - Interactive programming - Supports : RS232/RJ45/PCMCIA Fjdjuhbr Hjpfx Ag Tspb - Rigid tapping - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor : MAYFRAN - Tool probe

Condition: new, Year of construction: 2024, Working range Travel X : 730 mm Travel Y : 450 mm Travel Z : 470 mm Swivel range B-axis : 220° (±110°) Fpodpeur Nr Refx Ag Tob Indexing B-axis : 0.0001° Swivel range C-axis : 360 Table load : 200 kg Max. Workpiece diameter : 500 mm Spindle Speed : 12.000 rpm Power : 11 kW Torque : 57,3 Nm Tool holder : SK-40 Tool changer : 48 places equipment Tool measurement : RLP40 measuring probe Coolant device : 15 bar Turning and swivel table : 5-axis simultaneous capability

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand MAZATROL Model SMOOTH X Main Drive Number of spindles 2 Spindle speed range 1 - 3300 rpm Spindle bore ø112 mm (ø4.41 inches) Number of axis 5 Movement X-Axis Movement 615 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 260 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 2563 mm Z-Axis Rapid Traverse 40 m/min W-Axis Rapid Traverse 30 m/min Fedpfxox Stk Tj Ag Topb Tools Number of index 72 Max weight 12 kg Max tool diameter 90 mm Type of tool holder HSK-A63 (T63) This 5-axis Mazak Integrex i-400S-2500U was manufactured in 2018, featuring Mazatrol SMOOTH X Control and a Hydrafeed MSV110 Barfeed. It offers a maximum machining diameter of ø658 mm and a length of 2,497 mm. Equipped with a milling spindle speed of 12,000 rpm and a tool storage capacity of 72 tools, this turn-mill centre is ideal for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the Mazak Integrex i-400S-2500U machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2008, CNC Horizontal Machining Center MAZAK HCN 5000 II Year of manufacture: 2008/10 Tool magazine: 40 tools Spindle speed: 18,000 rpm NC rotary table (fourth axis / 0.001 x 360,000 positions) Technical Specifications: Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Fedpfx Agjx Hgh Io Tspb X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Distance from spindle center to pallet center, min.: 70 mm Distance from spindle center to pallet center, max.: 810 mm Distance from spindle center to pallet surface, min.: 100 mm Distance from spindle center to pallet surface, max.: 830 mm Tool holder: SK40 Tool magazine: 40 tools Spindle speed: 18,000 rpm Pallet working area: 500 x 500 mm NC rotary table (fourth axis / 0.001 x 360,000 positions)

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, Fpjdpfx Aeu Rb Snsg Teb C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor

Condition: used, Year of construction: 2013, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Fpodpfsx At Svox Ag Tob Table indexing 0,001 ° Spindle taper CAT 40 Spindle speed 18.000 1/Min Spindle motor 30/22 kW Magazin capacity 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW Fpodpfx Astugggsg Tsb 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Year of construction: 2010, condition: ready for operation (used), A twin-spindle turning and milling center Mazak is available. Travel X/Y/Z: 580mm/160mm/1545mm, B-axis: 225°, C-axis: 360°, center distance: 1500mm, max. turning diameter: 660mm, swing diameter over bed: 660mm, speed main spindle/counter spindle: 5000rpm, tool stations: 40+9, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5200mm/2550mm/2600mm, weight: approx. 14000kg, spindle hours: 24679h. Including high-pressure coolant, SMW steady rest, SMW chuck, steady rest integration, Renishaw probe, measuring probe, CAD/CAM software Topsolid 7.18, oil skimmer, postprocessor and Inspection-Plus package. The machine was mainly used for finishing. Documentation available. An on-site inspection is possible. Fedpfx Agex Ih Dgj Tepb

Condition: used, Year of construction: 1969, functionality: unexamined, For sale is a robust, heavy-duty lathe from Yamazaki / Mazak, model Rex 610 × 1500 (centre distance 1500 mm, swing over bed 610 mm). Ideal for machining large and long workpieces. The machine is in condition commensurate with its age. It has not been tested and is sold as is. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialised in both Mazak machines and other brands. We place great emphasis on personalised support and are happy to assist you at any time even after your purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! Fedpoxyv Alefx Ag Tspb PS CNC Service Germany GmbH & Co. KG All details without guarantee.

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Fpedpfotmtktox Ag Tob Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: used, Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix Nexus, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,000 kg, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, CNC Horizontal Machining Centre CNC Control Mazatrol Matrix Fpjdpfxjxftg So Ag Teb Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 kg Movement X-Y-Z-axis 730x730x740 mm Table indexing 0,001 ° Spindle taper DIN 69871A-40 Spindle speed 18.000 1/Min Spindle motor 35-26 kW Magazin capacity 80 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.