Used Heusinger Salmon for sale (19)

Condition: used, Year of construction: 2010, For sale: Conveyor belt/transporter, 9.4 meters long. Type: PPI Top Conveyor Manufacturer: Marel Salmon A/S; ID 132347 Year of manufacture: 2010 Dimensions: Width of upper belt: 29 cm Width of lower belt: 56 cm Csdpfxoz Tqwve Aicohd Distance between upper and lower belt: 20 cm Net price: 1,700 EUR Price negotiable.

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, RADEMAKER / RONDO Topline ASTec.W industrial line – Production of layered and filled products Complete RADEMAKER / RONDO industrial line for sheeting, gauging, shaping, filling, and cutting dough products. The equipment was previously used for the industrial production of salmon en croûte. Thanks to its modular design and numerous workstations, it can be adapted to other pastry, viennoiserie, and savory or sweet layered product productions, subject to the necessary tooling and adaptations. 1. RADEMAKER Block Processor – 2006 Industrial equipment designed for the gradual reduction of dough blocks into a homogeneous strip, particularly for processing layered dough blocks. Type: Block Processor Year: 2006 Serial number: 280053 Working width: 650 mm Chsdpfx As Abz D Isicsd Belt width: 650 mm Weight: 1,725 kg Power supply: 240/415 V, three-phase, 50 Hz, 17 A Documented dimensions: 6,000 × 1,400 × 2,850 mm 2. RONDO Topline ASTec.W Industrial line for shaping and preparing filled products. Model: Topline ASTec.W Line reference: D2147 Manufacturer documentation: edition 01/2012 ASTec hygienic design adapted for wet cleaning. Documented composition: Dough feeding and conveying belts. Two RONDO flour dusting devices. RONDO laminator, working width 740 mm, belt 700 mm. 15-meter industrial shaping table, 700 mm belt, with marking, cutting, and spraying devices. RONDO Rondofiller dosing unit for filling application. Overlay conveyor for working with two layers of dough. Gauging unit. RONDO ZST600 cutting station. RONDO station, model ZKWA605A.A, year 2011, machine number D1221401, working width 660 mm. RONDO guillotine, model ZGEM700W.A, year 2009, machine number C9273305, with documented tooling of five 80 × 125 mm dies. Dough scrap recovery system. Electrical control cabinet and Siemens operating interface. 3. Applications The line was used for the production of products based on salmon wrapped in dough. It also offers possibilities for adaptation to various layered products, turnovers, pastries, filled specialties, and preparations involving two layers of dough. Other applications can be considered depending on the cutting, shaping, and dosing tools available or to be installed. 4. General characteristics Manufacturers: RADEMAKER / RONDO Years of major equipment: 2006, 2009, and 2011 Total length of the documented configuration: approximately 24 meters Documented maximum width: approximately 2 meters Documented maximum height: approximately 2.85 meters Width of production conveyors: up to 700 mm depending on the section Technical documentation and manufacturer's manuals available. Industrial line consisting of several modules that can be considered for adaptation to other productions. The exact composition, available accessories, and production possibilities must be confirmed during technical inspection.

Condition: ready for operation (used), Year of construction: 2011, Marel 2630 Salmon Filleting Machine If you’re processing salmon or trout, the Carnitech CT 2630 will give you a competitive advantage. The dual knife system – band and circular – ensures a clean, precise cut every time. This results in a higher yield, less waste, and a better-quality fillet. It’s designed to handle fish ranging from 2 to 7 kg, processing up to 20 fish per minute without compromising cut quality. The integrated compressor and low water usage make it efficient and hygienic. Add the circular knife grinder accessory to maintain optimal performance. This machine is all about fast, clean, and consistent output. Unique cutting principle Combination of circular knives and band knives Significantly improved yield Electrical panel and compressor with dryer are fully integrated Easy access for cleaning Manufacturer: Marel Model: CT 2630 Year: 2011 Chsdpfozu Rfkex Aiced Fish size: 2-7 kg Capacity: Up to 20 fish/minute Electricity: 3x400V Power consumption: 4.0 kW Machine dimensions L x W x H: 2,000 x 850 x 1,650 mm Machine weight: 675 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 Carnitech CT 2612 single-lane pin-bone removing and packing line for salmon and trout fillets. The pin-boner dates from 2000 and the packing line from 2023/24. Technical specification: ✅ Manufacturer - Carnitech A/S ✅ Model - CT 2612 Chodpfoy Swi Hox Aicod ✅ Lanes - 1 ✅ Pin-boner year of manufacture - 2000 ✅ Packing line year of manufacture - 2023/24 ✅ Capacity - up to 36 fillets per minute ✅ Fillet size - 0.5 kg to 4 kg ✅ Fillets are conveyed head end first, skin side down, on a PVC belt Condition: According to the seller, the line is in full working order, and the pin-boner has been refurbished, including new electrics. Video available.

Condition: excellent (used), Year of construction: 2016, Marel 2630 Salmon Filleting Machine If you’re processing salmon or trout, the Carnitech CT 2630 will give you a competitive advantage. The dual knife system – band and circular – ensures a clean, precise cut every time. This results in a higher yield, less waste, and a better-quality fillet. It is designed to handle fish ranging from 2 to 7 kg, processing up to 20 fish per minute without compromising cut quality. The integrated compressor and low water consumption make it efficient and hygienic. Add the circular knife grinder accessory to maintain optimal performance. This machine is all about fast, clean, and consistent output. Unique cutting principle Combination of circular knives and band knives Significantly improved yield Electrical panel and compressor with dryer are fully integrated Easy access for cleaning Manufacturer: Mare Chsdezyk Amjpfx Aicjd Model: CT 2630 Year: 2016 Fish size: 2-7 kg Capacity: Up to 20 fish/minute Electricity: 3x400V Power consumption: 4.0 kW Machine dimensions L x W x H: 2,000 x 850 x 1,650 mm Machine weight: 675 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Blanching bath with steam for Salmon pieces. Blanching area 3000 mm. Mesh belt width 600 mm. Fish loading at the entrance (manually) – Water supply from system D – 40 mm. Steam supply 30 mm, 6-8 bar 150gr. Bath with double wall (heated). Lids can be lifted. Two hatches in the side wall. T regulation from 70-95 grC, mesh belt speed adjustable - from the control cabinet Ventilation outlet for the bath 200mm. Cooling in the exit area - cold water from the system. Level overflow. Water level sensor in the bath - for filling the bath. Steam heating - snake. Closed system. Knife at the end of the mesh belt (belt cleaning). Chjdpfsv E Ec Nox Aicod

Condition: excellent (used), Year of construction: 2018, Marel 2730 salmon filleting machine with back and belly trim The Marel MS 2730 is an automated salmon filleting machine designed to maximize yield and throughput, capable of processing up to 25 fish per minute. It features automated size adjustments via a touch screen, includes advanced back and belly trimming, and is built for easy operation and hygiene. The machine accommodates salmon from 1.5 to 8 kg, with optional kits available for smaller fish, and is part of Marel's larger processing solutions. Key Features and Capabilities Automated Processing: The MS 2730 automatically adjusts to different fish sizes and uses electronically controlled tools to maintain high quality and consistent results. High Throughput: It can fillet up to 25 salmon per minute, increasing production efficiency. Chodpfx Aisy Aul Tjcsd Improved Yield: The design includes a set of circular knives that capture meat near the center bone, significantly increasing fillet yield. User-Friendly Operation: A multilingual color touch screen provides easy and safe control over all operations, with pre-programmed settings for different fish sizes. Compact Design: The machine has a compact footprint, allowing for easier integration into existing processing lines. Technical Specifications Fish Size: Standard 1.5 to 8 kg, with a kit available for fish as small as 500 g. Water Consumption: Approximately 15 liters per minute. Power Requirements: Operates on 3 x 400V and requires a 3.3 kW power supply. Benefits for Processors Efficiency: Streamlines workflow with automated adjustments and high-speed processing. Quality & Yield: Produces high-quality fillets by including more meat and minimizing waste. Flexibility: Accommodates various fish sizes and is part of a larger, integrated system for comprehensive processing solutions. Cost-Effectiveness: Optimized water consumption reduces operating costs. The fish is fed into the machine belly down, which makes the infeed much easier and faster. An additional set of circular knives cuts the fish from vent to tail. This cut raises yield, as the meat close to the center bone is included in the fillets. For the belly bone cut, 4 sets of finger pressures secure maximum control of the fish and enable optimum cutting of both pre-rigor and post-rigor fillets. The result is high-quality fillets with higher yield and output. The MS 2730 automatically adjusts to various fish sizes, so there is no need to adjust once the program has been switched on. The MS2730 can process up to 25 fish per minute, depending on the length of the fish. With the built-in system for measuring the fish´s profile and size, the electronically controlled cutting tools can automatically adjust the filleting program to the fish´s size and shape. The result is higher throughput, quality and yield depending on trim specifications. With the optional small fish kit installed, the MS 2730 is capable of filleting fish weighing from 500 g up to 4 kg. Manufacturer: Marel Model: MS 2730 Year: 2018 Capacity: 25 fish per minute Fish size: 1,5-8 kg. Power Supply: 400/230V / 50 Hz Power: 5,5 kW Water consumption: 15 liter/min. Machine dimensions (LxWxH):  3.150x1.035x1.980 mm Machine weight: 1.000 kg.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Chodpsy Rimzefx Aicsd Supplied with User Manual and spare knives.

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, NOMA NOWICKI MHM-21/84 F is a brine injector designed for the uniform injection of fish and seafood, both boned and unboned, and – after a quick needle change – any other boned or unboned products, such as poultry. Manufactured in 2026, the machine features 21 needle sockets (84 quadruple needles), steel needles operating at a brine pressure of up to 3 bar, microprocessor control with a color touchscreen, and an AISI 316 stainless steel construction in food-contact areas. Replacement parts are included. Key Advantages of the NOMA NOWICKI MHM-21/84 F Brine Injector The machine ensures even distribution of brine in delicate products, such as fish fillets and seafood, and, after changing the needles, is suitable for injecting poultry and other products, whether bone-in or boneless. Smooth adjustment of pressure and head speed, 2-mm-diameter needles, and three-level pressure adjustment allow the injection process to be tailored to various raw materials and recipes. Chsdpfj Aggiqox Aicjd Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: brine injector Model: MHM-21/84 F Serial number: 01126803 Year of manufacture: 2026 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Installed power: 2.4 kW, maximum current 12 A Pump power: 1.5 kW Construction: AISI 316 stainless steel in food-contact areas, AISI 304 in other components; designed for use in the fishing industry Number of needle sockets: 21 Maximum number of needles: up to 84 (quad needles) for fish and seafood, or 42 for poultry Needle diameter: 2 mm Head: easily replaceable, with quadruple needles as standard, top-side needle loading Head drive: top-mounted, NORD gearbox with frequency converter, stepless speed control Number of head strokes: 21 – 44 strokes/min Maximum head stroke height: 110 mm Maximum product height before injection: approx. 90 mm (up to 110 mm after injection) Removal clamp: adjustable to 3 heights, prevents over-injection Conveyor: easy-to-clean plastic belt, 325 mm wide Conveyor feed per head stroke: adjustable, 16; 35; 75 mm/cycle Brine pressure: continuously adjustable from 0.5 to 3.0 bar (in 0.1 bar increments), up to 3 bar as standard Brine pump: centrifugal, high-efficiency, stainless steel, controlled by a variable-frequency drive Filtration: multi-stage, easy to clean, with an additional tubular filter for improved brine purification Brine tank: stainless steel, 80 L, with brine mixing (preparation) and drainage Injection rate for a single pass (salmon): up to 12% Controls: microprocessor-based HMI, MITSUBISHI color touchscreen, MITSUBISHI PLC, variable-frequency drives on the gearbox and brine pump Throughput (approximate, for 1 pass): Herring fillets: injection rate approx. 10%, approx. 200 kg/h Salmon fillets: injection rate 8 – 12%, approx. 250 kg/h Poultry fillets: injection rate 25 – 30%, approx. 500 kg/h Chicken drumsticks: injection rate 20%, approx. 500 kg/h Chicken necks and wings: injection rate 12%, approx. 400 kg/h

Condition: excellent (used), Geba HS 240 'long slice' slicer with very low running hours - less than 2,500. Available immediately. Cjdsk H H Dyopfx Aicohd

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim High-performance automatic salmon filleting machine Available from August / September. This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) - Water consumption: Approx. 15 L/min - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. More photos and full specifications: / Chodpfx Aszl Sydeicsd * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent)

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button Cedpof Arugofx Aicehd ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: used, Year of construction: 2012, machine/vehicle number: A092895, Marel OptiWeigher + 20-Gate Fish Grader with 6 Printers Grader type: dis-ma45-b600-dual Complete used Marel weighing, grading and packing system for fish processing. The system includes a Marel OptiWeigher dynamic weighing module and a dual-sided Marel grader with 20 grading outlets. Configuration: - Marel OptiWeigher - 20 grading gates - 10 gates on the left - 10 gates on the right - gate spacing: 675 mm - 6 label printers - 3 printers on each side - packing shelves - roller conveyors - packing buffers - stainless-steel food-processing construction - Intralox Series 1650 polypropylene belt - approx. grader length: 9,050 mm - electrical supply: 3 × 400 V + N - grader motor: 0.75 kW The product is dynamically weighed by the OptiWeigher and can then be automatically distributed to the selected grading outlet according to the programmed weight class. The machine was used for fish processing and is suitable for applications such as: Chsdpez Hc Aiofx Aicsd - fish grading, - salmon processing, - batching, - weight classification, - direct packing at grading stations. It may also be adapted for poultry or other food products, depending on product size and process requirements. The six printer positions allow direct labeling at packing stations. Possible packing formats include: - cartons, - EPS / polystyrene boxes, - plastic crates, - tubs. The system may be integrated into a Marel Innova environment, subject to verification of the installed control and software configuration. Technical documentation available. Inspection possible by appointment. Price: on request.

Condition: good (used), Year of construction: 2013, Trio FTC Single Lane Pin Boner The BAADER TRIO FTC single-lane automatic pinbone remover is a pinbone remover with automatic feed. Pressure control via a counterweight ensures consistent results. Customer Benefits: • Automatic machine for small-scale production • Stable pinboning results • No need for a large working area Manufacturer: Baader / Trio Chedpfx Aisz H I R Sscjd Model: A-PBR Year: 2013 Capacity: Up to 12 fillets/minute Fish Species: Salmon, Trout, Lake Whitefish, fresh / defrosted and smoked fillets Machine Dimensions (L x W x H): 1,250 x 700 x 1,600 mm Machine Weight: 100 kg.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel Csdpfx Asiky H Seicshd - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 328 kW (445.96 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,070 kg, input voltage: 400 V, total width: 2,260 mm, total length: 3,610 mm, total height: 2,300 mm, warranty duration: 6 months, AIRCOOLED CHILLER CARRIER 30RB0342 0474 PEE 328 KW Codpfo Af Ra Eox Aicshd Cooling capacity: 328 kW / 93.26 tons (12/7 — 35°C) Year of manufacture: 2009 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 5 pcs. Danfoss SH300A4ACA (scroll) Type of refrigerant: R410A Number of fans: 5 pcs. Hydraulic module: 1 pcs. water pump Salmon LRN206-15/5.5 CARRIER ST, expansion vessel. Dimensions: 3.61x2.26x2.3 m Weight: 3070 kg Working hours: 4790/4310/4350/3520/3630 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, 40 leather cases, each containing 10 knives Codpfsz Iv Tkox Aicohd 10-piece professional knife set – stainless steel – new/unused For sale is a high-quality 10-piece knife set including a sturdy storage and transport case. The knives are new and unused, some still in their original protective wrapping. Ideal for the catering industry, hotels, butcher shops, catering services, commercial kitchens, or private households. Set consists of: * Salmon/ham knife 25 cm * Slicing knife 24 cm * Chef’s knife 23.5 cm * Bread knife 22.5 cm * Boning knife 16.5 cm * Cleaver 17.5 cm * Paring knife 9 cm * Meat fork 18.5 cm * Sharpening steel 23 cm * High-quality transport case Stainless steel blades with robust metal handles. According to the manufacturer, the knives are individually sharpened and quality-checked by hand. Several sets available. Therefore, also of interest to dealers. The goods come from a bankruptcy; we are certain that the knives were not manufactured in Switzerland, hence the future price.

Year of construction: 2015, condition: excellent (used), Hobart high speed steamer Model: 305GB Chedpefv Spcjfx Aicjd Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles; Chsdpfxofdkb Ej Aiced  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request