Fish processing machine

NMTEH NM-BLANSH3M

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Psdpfowp Rqfex Amijgk Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Pedpswg R Rtofx Amijgk

Condition: excellent (used), Year of construction: 2014, Viessmann Vitoplex 700kw Year: 2014 Type: SX2A Pgjdjtu T I Uepfx Amiek Output:700Kw Viewing only by telephone arrangement! Preferential sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: new, Ostas 3-roller round bending machine SBM 1270 x 95 Special equipment included in the price: Hardened rollers Motorized rear roller adjustment Digital display Features: - Asymmetrical 3-roller round bending machine with motorized drive - Hardened rolls - Motorized rear roll adjustment - Digital display - Upper roll can be swung out - Conical bending device - foot switch Technical details: - sheet width: 1270 mm - sheet thickness: 3,0 mm - roll length: 1270 mm - Roll diameter: 95,0 mm - Smallest bending diameter: 140,0 mm Podpfxog Tzbhs Amijgk - Motor power: 1,1 kW - Dimension L-B-H: 2100 x 760 x 1250 mm - weight: 470 kg

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Pgjdpfxohwrgte Amisk Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table Pedpfx Amjrivwfjiogk - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade Pgedpfxjif Ek Re Amiek • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2018, Baader 588 Filleting Machine The BAADER 588 is a unique and user-friendly filleting machine for small and medium-sized whitefish – fresh or defrosted. The consistent running of fish through the machine guarantees a higher throughput. Centralized mechanical adjustments of cutting parameters allows for different species and precise cutting. The BAADER 588 produces fillets of outstanding quality – even from soft fish. It has been specifically designed to allow for easy and efficient cleaning and servicing. The BAADER 588 significantly reduces subsequent trim work downstream. B’Logic® is our dedicated software solution for performance monitoring and yield control. Benefits For fresh or defrosted raw material Continuous and stable operation Simple to use Precise cutting tools minimize ‘giveaway’ Technical Data Working range (approx.) Cod: 400–2,500 g / 35–70 cm Haddock: 400–2,300 g / 35–65 cm Saithe: 400–2,000 g / 35–62 cm Hake: 160–800 g / 20–47 cm Alaska Pollack (h+g): 150–450 g Throughput Up to 35 fish/min. Up to 40 fish/min. (Alaska pollack) ‍ Features Simple operation and maintenance Rapid changeover for to different species Easy to access, maintain and clean Best fillet quality Active cutting tools Smooth surface as a result of reduced fillet stress during processing No gaping No blood spotting No black belly skin White membrane on Flexible Suitable for a wide range of species Psdjtu Uu Depfx Amijgk Fresh or defrosted raw material Small machine footprint Direct fillet transfer to BAADER 59 Skinner possible for consistent product flow Hygienic, open and flexible design Open design for easy access and supervision Open design allows for easy cleaning Quick and easy to remove conveyor belt system

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Podpfx Ajfhb Tkemijgk

Condition: good (used), Electric transformer E.R.E 1 250 kva Year 2002 Psdpfor I Sm Esx Amiogk