Used beverage production for sale (1,072)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30107-34551, production capacity: 12,000 unit/h, TECHNICAL DETAILS Heating method: Steam Maximum temperature: 125 °C Flow rate: 6,000 - 12,000 liters/h MACHINE DETAILS Maximum pressure: 6 bar Ncjdpfx Aezia D Ejlaow EQUIPMENT Integrated deaerator

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, conveyor belt length: 15,000 mm, production capacity: 6,000 unit/h, For sale is a complete filling system from the manufacturer Tetrapak, consisting of the following components: TBA 8 filling system (year of manufacture: 1994) Tetra Cap Applicator 21 (Recap 3) (year of manufacture: 2003) Tetra Carton Packer 70 (year of manufacture: 2002) Inkjet printer EBS 6500 approx. 15 m of conveyor belts with motors and brakes Spare parts Ncodpjzh H Stsfx Alaow A list of the included spare parts can be found in the attached document. TECHNICAL DETAILS Production capacity: 6000 units/h Conveyor belt length: approx. 15 meters MACHINE DETAILS Operating hours filling system: 85,286 h Operating hours cap applicator: 36,416 h Operating hours carton packer: 38,626 h EQUIPMENT Tetrapak TBA 8 filler without pull tab Tetra Cap Applicator 21 (Recap 3) Tetra Carton Packer 70 Inkjet printer EBS 6500 The machine's maintenance has been carried out exclusively by Tetrapak in recent years.

Condition: used, Year of construction: 2016, Overview This belt press was manufactured in 2016 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. The SRAML TP50 belt press is delivered together with the SRAML JF1500 mechanized self-cleaning filter, which removes impurities such as seeds and stems. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  - Capacity: 700 kg/h (apples) - Application: Juice extraction from crushed apples Ncedpfx Ajzpffholajw - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Scope of Delivery - Belt Press | SRAML | TP50 | 700 kg/h | 2016 - Self-Cleaning Filter | SRAML | JF1500 | Removal of seeds and stems | 2016 - Spare parts | Belts, rollers, bearings, self-cleaning filters with pump, gearbox, 0.75 kW motor and further wear parts

Condition: used, Year of construction: 2002, Overview This Alfa Laval VNPX 510 SFD-34C is a self-cleaning disc-stack separator built in 2002 by Alfa Laval (Tumba, Sweden). The VNPX series is an established solids-ejecting clarifier platform for the food and beverage industry; this unit was last operated in a brewery. The separator is currently disassembled: frame, bowl section, drive motor and fittings are stored as individual components, which makes inspection of the main parts straightforward and simplifies transport. The scope of delivery includes the 22 kW ABB drive motor, a stainless steel sludge collection vessel of approx. 150 l and the Siemens SIMATIC C7-633 control system with a separate touch panel and switch cabinet. Technical data - Manufacturer: Alfa Laval (Tumba, Sweden) - Model: VNPX 510 SFD-34C - Year of manufacture: 2002 - Machine type: self-cleaning disc-stack separator (clarifier) - Max. bowl speed: 6,240 rpm - Motor shaft speed: 1,500 rpm, 50 Hz - Recommended motor power: 22 kW - Max. density of feed: 1,100 kg/m³ - Process temperature: -5 to +100 °C - Control: Siemens SIMATIC C7-633 incl. separate touch panel and switch cabinet Equipment - ABB drive motor, 22 kW (separate) - Stainless steel sludge collection vessel, approx. 150 l - Siemens SIMATIC C7-633 control with touch panel and switch cabinet - Valve and fittings assembly with flow meters and pressure gauge - Operating manual (German) Condition Ncsdpfx Aozpai Ijlaew Used. The separator was dismantled for operational reasons and is sold disassembled; the motor is separate. The components were stored outdoors. Availability Immediately. Location: Germany.

Condition: used, Year of construction: 2019, Overview This lot comprises two VIG pressure tanks of 5,000 litres each, built in 2019 by VIG Vertrieb Industrieller Güter (Kreuztal, Germany). The vessels are CE-marked pressure vessels according to EC pressure equipment directive 2014/68/EU and were last used as activated carbon filters in a brewery’s water treatment. Each tank is fitted with a filter star; the filter candles show light damage. The tanks are interconnected with DN 65 piping and come with butterfly valves for cleaning, draining and shut-off as well as vacuum/check valves. With their young year of construction and availability as a pair, the vessels suit filtration and pressure-holding duties in breweries and beverage plants alike. Technical data - Manufacturer: VIG Vertrieb Industrieller Güter (Kreuztal, Germany) - Year of manufacture: 2019 - Number of tanks: 2 - Volume: 5,000 l per tank - Max. operating pressure (PS): 6 bar - Test pressure (PT): 7.8 bar Ncedpfx Alozpaiusasw - Operating temperature (TS): 0 - 50 °C - Pressure vessel per EC directive 2014/68/EU, CE-marked - Front manhole on each tank Equipment - Filter star with filter candles in each tank (candles with light damage) - Interconnecting piping DN 65 - 3x M&S butterfly valves (cleaning, draining, shut-off) - 2x vacuum / check valves Condition Used - good overall condition in line with the young year of construction. The filter candles of the filter stars show light damage. The tanks are installed indoors. Availability Immediately. Location: Germany.

Condition: used, Year of construction: 2021, Overview This SPEIDEL Braumeister 500 is a compact single-vessel electric brewhouse with 500 L (5 hL) batch volume, built in 2021 by Speidel Tank- und Behälterbau GmbH (Ofterdingen, Germany). Mashing, lautering and wort boiling take place in one stainless-steel kettle: the removable malt pipe with perforated base screens and filter cloth holds the grain bed, while the integrated 18.4 kW electric heating elements and wort circulation manage the temperature steps. The brewhouse produced beer at a craft brewery in France until November 2025. It is dismantled, stored and immediately available. Technical data - Manufacturer: SPEIDEL Tank- und Behälterbau GmbH (Ofterdingen, Germany) - Model: Braumeister 500 (Art. no. 46500) - Year of manufacture: 2021 - Machine type: single-vessel electric brewhouse (malt pipe system) Ncjdpfx Aljznd Ewsajw - Batch volume: 500 L (5 hL) - Heating power: 18.4 kW (electric) - Power supply: 400 V, 3-phase, 50/60 Hz - Protection class: IP 43 - Application: beer - Dimensions: approx. 120 x 126 x H 150 cm - Weight: approx. 377 kg Equipment - Removable malt pipe with perforated base screens and filter cloth - Stainless-steel lid - Integrated electric heating elements and wort circulation Condition Used - in beer production until November 2025, last maintenance November 2025. The machine is dismantled and stored. Availability Immediately. Location: France. Handling and truck loading are included (EXW loaded). The machine can be visited on request.

Condition: used, Year of construction: 2005, machine/vehicle number: PST36, Used APV N35 Plate pasteurizer 10246 KghTechnical Specifications & Performance DataThis plate pasteurizer is engineered for continuous high-efficiency thermal treatment in beverage and dairy processing. Manufactured by APV Products, the N35 model provides reliable heat exchange performance with a compact footprint, making it ideal for integration into a used bottling line or broader industrial packaging and beverage production setup.Manufacturer: APV ProductsModel: N35Nominal capacity: 10,246 kg/hHeat transfer surface: 54.6 m²Working pressure: 10 barWorking temperature range: 0.9 to 100 °COverall width: 1300 mmOverall height (max): 2500 mmOverall length: 2700 mm (approx. 3000 mm with control cabinet)Configuration: Plate heat exchanger pasteurizer (HTST/flash process)Previous application: Milk processingAdvanced Automation & Control SystemsThe APV N35 plate pasteurizer supports modern automation architectures for precise thermal treatment. Typical configurations include PID control of product and heating media with temperature, flow, and pressure instrumentation, as well as interlocks for safe operation. Integration with a plant PLC/HMI enables recipe management, trend logging, and alarm handling to stabilize outlet temperature and holding-time compliance. Operator safeguards and clear access points facilitate routine checks and adjustments while maintaining hygienic conditions. Quick disconnects and service-friendly plate pack design help minimize downtime during maintenance or format changes.Production Line Integration CapabilitiesDesigned for seamless integration upstream of filling and downstream of raw product reception or blending, the N35 aligns with beverage and dairy workflows in second hand and new industrial packaging environments. It pairs effectively with homogenizers, balance tanks, deaerators, and CIP systems, and can feed fillers handling PET, glass, or carton packaging in beverage production lines.Machine Condition & Maintenance HistoryThis unit is offered as a second hand plate pasteurizer formerly used in milk production. Its robust stainless-steel design and APV engineering support reliable recommissioning in a new beverage production or food-processing facility. Routine service of seals, gaskets, and instrumentation is recommended to align with site-specific quality protocols before startup.Operational Performance & VersatilityThe APV N35 delivers stable outlet temperatures and consistent holding times suitable for HTST pasteurization. The plate pack enables efficient heat recovery, optimizing energy use and reducing thermal load on utilities. The unit’s performance characteristics make it a strong fit for dairy applications such as milk, with potential adaptability to other heat-treatable liquid foods or beverages when configured with appropriate elastomers, plate patterns, and thermal profiles.Installation Requirements & Site PreparationPlan installation with the stated dimensions and allow service clearance for... Ncsdpfxeznvfce Alasw

Condition: used, Year of construction: 2004, machine/vehicle number: PST35, Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strategies. Typical configurations include temperature control loops, flow regulation, and safety interlocks to maintain stable pasteurization temperatures and hold times. The system layout facilitates integration with common PLC/HMI platforms used in beverage production, enabling recipe control, trend logging, and alarm management. Operator-friendly interfaces allow fast start-up, monitoring, and shutdown routines, while sanitary design supports rigorous hygiene requirements.Production Line Integration CapabilitiesThis flash-style thermal unit fits upstream of filling and packaging operations across a wide range of process layouts. It can be paired with balance tanks, deaeration, homogenization, and inline filtration, and can feed fillers serving PET or glass bottling operations in a used bottling line. Its compact footprint makes it suitable for both standalone processing cells and fully integrated beverage production lines. Format changes are process-driven (flow/temperature parameters) rather than container-driven, enabling multi-product flexibility for water-based and dairy-derived liquids.Machine Condition & Maintenance HistoryThe unit was previously operating on whey in a dairy plant. It has been professionally dismantled and is ready for collection and installation at a new site. Its condition supports recommissioning after standard installation, utility connection, and validation procedures typical for second hand processing equipment.Operational Performance & VersatilityThe APV Products N35 plate pasteurizer provides efficient heat recovery and stable thermal profiles for continuous processing. The plate heat exchanger design is well-suited for clear and low-to-medium viscosity liquids found in beverage and dairy processing. It aligns with industrial packaging requirements where consistent microbiological stability, product quality, and throughput are priorities. The 10,000 l/h nominal capacity makes it a solid choice for mid-scale beverage production environments seeking reliable performance.Installation Requirements & Site PreparationSite readiness typically includes utilities for heating and cooling media, process water, and drain connection... Nsdjznvdrjpfx Alajcw

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesThis second hand packaging machinery set integrates smoothly in used bottling line. Infeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still and spark... Ncsdpfszd Ucxjx Alaow

Condition: used, Year of construction: 2007, Overview This complete PET bottling line was built by leading European manufacturers including Sidel, Sacmi and Sarcmi. It is designed for still and sparkling water and is also suitable for soft drinks. With a nominal output of 19,000 bottles per hour for 0.5 L and 16,000 bottles per hour for 1.5 L, it covers the full process from preform blow moulding through filling, labelling, shrink wrapping and palletizing. The core of the line is a Sidel SBO Universal 14 blow moulder (2007) feeding a Sarcmi Azzurra 70-14 isobaric filler and a Sacmi Opera 200 RF rollfed labeller. Technical data - Line type: Complete PET bottling line - Different manufacturers: Sidel, Sarcmi, Sacmi, Zalkin, Zambelli, Comag, Acmi, Robopac - Years of manufacture: 1986 - 2019 - Nominal output: 19,000 bph (0.5 L); 16,000 bph (1.5 L) - Product: still and sparkling water, also suitable for soft drinks - Container: PET bottles 0.5 L and 1.5 L - Cap: Alaska PCO 1881 - Label: OPP rollfed - Packaging: shrink film - 0.5 L 3x2 and 4x3, 1.5 L 3x2 - Palletizing: Euro pallet 800 x 1200 and 800 x 600 Scope of Delivery - Blow Moulder | Sidel | SBO Universal 14 | 14 cavities; incl. Lanfranchi preform tilter, hopper and air recovery system | 2007 - Air Conveyors | NTS | Double chamber, approx. 60 m, 2 air fans - Filler | Sarcmi | Azzurra 70-14 | 70 isobaric filling valves, pitch 110 | 1988 - Capper | Zalkin | 14 capping heads | 1988 - Saturator | Rivi Eng | Carborivi | 30,000 L/h | 1986 - Labeller | Sacmi | Opera 200 RF | OPP rollfed, 18 plates, non-stop automatic reel change | 2011 - Cap Ink Marker | Linx | 8900 | marking on bottle cap | 2019 - Shrink Wrapper | Zambelli | LFT70 | single track with 1-to-4 track channelizer | 2004 Nsdpszlqzmjfx Alajcw - Handle Applicator | Comag | H 65/1 | cardboard handle, single track | 1999 - Palletizer | Acmi | Rasar P130 | double-head, incl. pad and pallet magazines | 1996 - Pallet Wrapper | Robopac | Genesis | ring wrapping, pallet presser, waterproof covering | 2000 - Conveyors | Procomac / Comag | bottle and pack conveyors, SEW / Selpee motors, Procomac cabinet with Pro-face touch panel Condition Used line, well maintained with extensive annual overhauls by the manufacturers. Currently still installed and under power. The line can be viewed on request. Availability Available from 12 October 2026. Location: Italy.

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent Nedpfxozlqu Tj Alascw - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 1992, Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS - Model: Hansacan can filler - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Nodpjzlqu Hofx Alaocw Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: used, Year of construction: 2011, operating hours: 25,731 h, machine/vehicle number: LC660, Used Tetra Pak A3 speed 030V 200 slim Filling lineTechnical Specifications & Performance DataThis complete used bottling line is a Tetra Pak A3 Speed (030V) configuration dedicated to 200 ml Slim cartons. It is a second hand, overhauled industrial packaging solution engineered for consistent performance in beverage production. All core components are manufactured by Tetra Pak for seamless compatibility and robust uptime.Main filler: Tetra Pak A3 Speed (030V), year 2011Container format: 200 ml Slim cartons (0.2L)Production capacity: 24,000 packs/hourRecorded hours: Filler 25,731 h; Accumulator 1,609 h; Straw applicator 14,219 h; Case packer 21,065 hLine status: Used and overhauledManufacturer: Tetra Pak (all included machines)Container type: Carton (brick-style)Included models: A3 Speed 030V filler; ACHX 30 accumulator; SA30 straw applicator; CBP30 Speed case packerAdvanced Automation & Control SystemsThe line benefits from Tetra Pak’s integrated automation philosophy, bringing reliable controls, intuitive operation, and coordinated start/stop logic across the equipment set. Operator interfaces provide clear status visualization, guided changeovers for the 200 ml Slim format, and recipe-based parameter management. Safety interlocks and guarded access points help protect operators while maintaining fast serviceability. The coordinated control across filler, applicator, accumulator, and packer reduces bottlenecks and supports stable high-speed operation in demanding packaging environments.Production Line Integration CapabilitiesDesigned for inline operation, this packaging machinery set delivers smooth product flow from filling through secondary packaging. The accumulator supports continuous production by buffering short downstream stops, while the straw applicator and case packer complete the distribution-ready presentation. The system can interface with upstream and downstream conveyors, printers, and palletizing solutions to form a complete production line.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed 030V2011Straw ApplicatorTetra Pak SA302011Accumulation SystemTetra Pak ACHX 302011Case PackerTetra Pak CBP30 Speed2011Machine Condition & Maintenance HistoryThis second hand Tetra Pak used bottling line has been overhauled and is presented in working con... Nedpfjzndthox Alascw

Condition: used, Year of construction: 2004, machine/vehicle number: AT31, Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strategies. Typical configurations include temperature control loops, flow regulation, and safety interlocks to maintain stable pasteurization temperatures and hold times. The system layout facilitates integration with common PLC/HMI platforms used in beverage production, enabling recipe control, trend logging, and alarm management. Operator-friendly interfaces allow fast start-up, monitoring, and shutdown routines, while sanitary design supports rigorous hygiene requirements.Production Line Integration CapabilitiesThis flash-style thermal unit fits upstream of filling and packaging operations across a wide range of process layouts. It can be paired with balance tanks, deaeration, homogenization, and inline filtration, and can feed fillers serving PET or glass bottling operations in a used bottling line. Its compact footprint makes it suitable for both standalone processing cells and fully integrated beverage production lines. Format changes are process-driven (flow/temperature parameters) rather than container-driven, enabling multi-product flexibility for water-based and dairy-derived liquids.Machine Condition & Maintenance HistoryThe unit was previously operating on whey in a dairy plant. It has been professionally dismantled and is ready for collection and installation at a new site. Its condition supports recommissioning after standard installation, utility connection, and validation procedures typical for second hand processing equipment.Operational Performance & VersatilityThe APV Products N35 plate pasteurizer provides efficient heat recovery and stable thermal profiles for continuous processing. The plate heat exchanger design is well-suited for clear and low-to-medium viscosity liquids found in beverage and dairy processing. It aligns with industrial packaging requirements where consistent microbiological stability, product quality, and throughput are priorities. The 10,000 l/h nominal capacity makes it a solid choice for mid-scale beverage production environments seeking reliable performance.Installation Requirements & Site PreparationSite readiness typically includes utilities for heating and cooling media, process water, and drain connection... Nedpfxjzndtbo Alaocw

Condition: used, Year of construction: 2005, machine/vehicle number: AT32, Used APV N35 Plate pasteurizer 10246 KghTechnical Specifications & Performance DataThis plate pasteurizer is engineered for continuous high-efficiency thermal treatment in beverage and dairy processing. Manufactured by APV Products, the N35 model provides reliable heat exchange performance with a compact footprint, making it ideal for integration into a used bottling line or broader industrial packaging and beverage production setup.Manufacturer: APV ProductsModel: N35Nominal capacity: 10,246 kg/hHeat transfer surface: 54.6 m²Working pressure: 10 barWorking temperature range: 0.9 to 100 °COverall width: 1300 mmOverall height (max): 2500 mmOverall length: 2700 mm (approx. 3000 mm with control cabinet)Configuration: Plate heat exchanger pasteurizer (HTST/flash process)Previous application: Milk processingAdvanced Automation & Control SystemsThe APV N35 plate pasteurizer supports modern automation architectures for precise thermal treatment. Typical configurations include PID control of product and heating media with temperature, flow, and pressure instrumentation, as well as interlocks for safe operation. Integration with a plant PLC/HMI enables recipe management, trend logging, and alarm handling to stabilize outlet temperature and holding-time compliance. Operator safeguards and clear access points facilitate routine checks and adjustments while maintaining hygienic conditions. Quick disconnects and service-friendly plate pack design help minimize downtime during maintenance or format changes.Production Line Integration CapabilitiesDesigned for seamless integration upstream of filling and downstream of raw product reception or blending, the N35 aligns with beverage and dairy workflows in second hand and new industrial packaging environments. It pairs effectively with homogenizers, balance tanks, deaerators, and CIP systems, and can feed fillers handling PET, glass, or carton packaging in beverage production lines.Machine Condition & Maintenance HistoryThis unit is offered as a second hand plate pasteurizer formerly used in milk production. Its robust stainless-steel design and APV engineering support reliable recommissioning in a new beverage production or food-processing facility. Routine service of seals, gaskets, and instrumentation is recommended to align with site-specific quality protocols before startup.Operational Performance & VersatilityThe APV N35 delivers stable outlet temperatures and consistent holding times suitable for HTST pasteurization. The plate pack enables efficient heat recovery, optimizing energy use and reducing thermal load on utilities. The unit’s performance characteristics make it a strong fit for dairy applications such as milk, with potential adaptability to other heat-treatable liquid foods or beverages when configured with appropriate elastomers, plate patterns, and thermal profiles.Installation Requirements & Site PreparationPlan installation with the stated dimensions and allow service clearance for... Nodpfxezndr Rs Alaecw

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Ncjdpfx Aey Ai Hlslaew

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Nodpfjzk U E Tjx Alajcw Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, Year of construction: 2021, Overview This compact canning line combines a Wild Goose Quick Change Gosling semi-automatic can filler, a Zomerdijk TWIST can rinser and a Crafted Goose EME automatic labeller (type JE-1100/185-S2) with a Cyklop CM220 thermal inkjet printer. Built in 2021 (filler and labeller), the line runs at up to 600 cans/hour and is compatible with 0.33 L, 0.44 L and 0.5 L can formats (currently tooled for 0.44 L cans). The filler is mounted on a wheeled base frame and includes DO buster and CO₂ regulation equipment as well as low- and high-flow foam control for beers above 4.2 g CO₂/L. The filler's production counter reads approx. 35,000 fill cycles - light craft-scale use. The line is still installed and under power, and can be viewed on request. Technical data - Line type: Small canning line (filler + rinser + labeller) - Capacity: 600 cans/hour - Can formats: 0.33 L / 0.44 L / 0.5 L (currently tooled for 0.44 L) - Filler type: Semi-automatic - Filler electrical supply: 230 V single-phase, 50/60 Hz, 8 A - Foam control: low- and high-flow, for beer >4.2 g CO₂/L - Labeller: EME type JE-1100/185-S2, automatic, with Cyklop CM220 thermal inkjet printer - Recorded use: approx. 35,000 fill cycles (production counter) - Year of manufacture: 2021 (filler and labeller) Scope of Delivery - Can Filler | Wild Goose | Quick Change Gosling | Semi-automatic; wheeled base frame; DO buster and CO₂ regulation; low- and high-flow foam control; tools and basic spare parts kit; format kits for 0.33/0.44/0.50 L cans | 2021 - Can Rinser | Zomerdijk Engineering | TWIST | Infeed buffer on stand, 2 rinse cages, post-rinse collection table; for 0.33/0.44/0.50 L cans - Labeller + Printer | EME (Crafted Goose) | JE-1100/185-S2 | Automatic label application; Cyklop CM220 thermal inkjet coder | 2021 Condition Ncjdpfxezk U Eyj Alaow Used - light craft-scale use; still installed and under power at the seller's site. The line can be visited and demonstrated on request. Availability Available now. Location: Spain.

Condition: used, machine/vehicle number: LC657, Used ALFA LAVAL oil extraction plant 2000 Kg/hTechnical Specifications & Performance DataThis complete olive oil processing line combines proven Alfa Laval separation technology with robust malaxing and preparation equipment to deliver reliable, continuous extraction performance. It is a second hand, industrial processing solution designed to operate upstream of an edible oil bottling and industrial packaging system, making it a strong fit for producers who wish to integrate a used bottling line or expand their beverage production and food oil processing capacity.Hourly throughput: 20 ql/h (approx. 2,000 kg/h of olives)Core equipment: Olive elevator, hammer crusher, malaxer 1 section, malaxer 4 sections, decanter centrifuge, two disc-stack separatorsDecanter centrifuge: Alfa Laval Type LWX 207Bowl diameter (decanter): 355 mmMax solids density (decanter): 1.7 kg/dm3Max bowl speed (decanter): 4000 rpmSeparators: Alfa Laval model 407 (qty: 2)Malaxer (4 sections): SACMI, code 4/SMalaxer (1 section): Single-section unit for flexible batch managementPreparation: Olive elevator and hammer crusher for steady, uniform feed to malaxersAdvanced Automation & Control SystemsThe line is suitable for modernization with contemporary PLC/HMI architectures for recipe control, interlocks, and traceability. Individual machine controls can be consolidated into a central panel for streamlined operation, alarm handling, and start/stop sequencing across the preparation, malaxing, and separation stages. Safety interlocks and guarding can be integrated around rotating equipment and infeed areas for compliance and operator protection.Ready for integration with centralized PLC/HMI controlProvision for start/stop sequencing across crusher, malaxers, decanter, and separatorsEmergency-stop circuits and safety guarding recommended around rotating assembliesMain electrical switchboard to be provided by the buyer (not included)Production Line Integration CapabilitiesThis processing line is engineered to operate inline upstream of an edible oil bottling line. It interfaces seamlessly with downstream storage, filtration, and filling systems for retail or bulk packaging. Multiple malaxer sections provide format flexibility for varying batch sizes and olive characteristics, while the decanter and separators deliver continuous clarification suited to high-quality oil production.Machine type/categoryManufacturer / ModelYearOlive ElevatorAlfa LavalHammer CrusherAlfa Laval Nedpfx Ajzmpzholaecw

Condition: used, Year of construction: 2014, operating hours: 4,908 h, machine/vehicle number: LC658, Use Tetra Pak A3 Speed V40 250ml prisma filling lineTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak aseptic carton solution centered on the A3 Speed filler. Engineered for industrial packaging and beverage production, it delivers high output with precise handling of Prisma cartons. All core modules share the same manufacturing year, providing a cohesive and modern second hand system suitable for efficient aseptic operations.Production speed: up to 24,000 packages/hourPrimary format: 0.25L Prisma cartonContainer type: Carton (aseptic brik)Filler: Tetra Pak A3 Speed, version 040V, year 2014, working hours 4,908Accumulator: Tetra Pak ACHX 30, version 070V, year 2014, working hours 5,528Straw applicator: Tetra Pak SA30, version 040V, year 2014, working hours 5,821Case packer: Tetra Pak CBP30 Speed, version 030V, year 2014, working hours 38Filling process: Aseptic carton fillingManufacturer: Tetra PakAdvanced Automation & Control SystemsThe line combines Tetra Pak engineering across all modules for synchronized operation and high uptime. Centralized operator interfaces and coordinated control logic simplify start-up, ramp-up, and stop sequences, while ensuring consistent product and package quality across the filling, straw application, accumulation, and case packing stages. Format handling for 0.25L Prisma cartons is streamlined with fast, repeatable adjustments and clear operator guidance.Integrated line control for coordinated speeds and bufferingOperator-friendly HMI on core equipmentAutomated interlocks across modules for safe operationRecipe-based format management for 0.25L Prisma cartonsProduction Line Integration CapabilitiesDesigned as an inline solution, this used bottling line accommodates continuous flow from aseptic carton filling to secondary packaging. The accumulator provides essential buffering to keep the filler running during short downstream stops. The straw applicator and case packer complete a compact, high-throughput configuration for beverage production.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed (040V)2014Various EquipmentStraw Applicator Tetra Pak SA30 (040V)2014Various EquipmentAccumulation System Tetra Pak ACHX 30 (070V)2014Case PackerTetra Pak CBP30 Speed (030V) Ncedpszmpzbofx Alaow

Condition: used, Year of construction: 2011, operating hours: 25,731 h, machine/vehicle number: LC659, Used Tetra Pak A3 speed 030V 125ml slim filling lineTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak A3 Speed configuration engineered for aseptic carton packaging of 0.125L Slim bricks. It is an ideal second hand solution for industrial packaging and beverage production where consistent output, reliability, and hygienic design are essential. Built by Tetra Pak engineering, the line couples the A3 Speed filler with downstream automation for efficient end-of-line handling.Manufacturer: Tetra PakMain filler model: A3 Speed (Version 030V)Year of manufacture: 2011Format/Volume: 0.125L SlimContainer type: Carton (aseptic brick)Production speed: up to 24,000 packs/hourOperating hours (filler): 25,731 hOperating hours (straw applicator): 14,219 hOperating hours (accumulator): 1,609 hOperating hours (case packer): 21,065 hLine composition: A3 Speed filler, SA30 straw applicator, ACHX 30 accumulation system, CBP30 Speed case packerFill type: AsepticAdvanced Automation & Control SystemsThe line leverages Tetra Pak’s integrated automation for stable performance across forming, filling, and end-of-line operations. Centralized controls and coordinated start/stop logic help maintain production continuity while safeguarding product sterility. Operator-friendly interfaces support routine operation and monitoring, while guided adjustments facilitate format handling within the Slim family.Integrated control architecture for synchronized filler and downstream equipmentRecipe-based operation for repeatable performance and quick setupDesigned for aseptic process integrity and hygienic operationInterlocked guards and safety protections around moving mechanismsProduction Line Integration CapabilitiesConfigured for inline operation, this second hand Tetra Pak A3 Speed 0.125L Slim used bottling line includes accumulation to stabilize flow and a dedicated straw application station ahead of case packing. It is designed for efficient handling of carton bricks and smooth transitions between subsystems, ensuring high uptime and consistent pack presentation for industrial packaging workflows.Machine TypeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed (Version 030V)2011Various Equipment — Straw ApplicatorTetra Pak SA302011Various Equipment — Accumulation SystemTetra Pak ACH... Ncodpfxezmpy Rj Alaew

Condition: used, Year of construction: 2006, Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data - Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) - Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) - Year of manufacture: 2006 - Machine type: crate palletizing and depalletizing line - Capacity: 33,000 bph (160 bottles per layer) - Pallet format: Euro - Crate formats: 5x4 - 400x300x300 mm / 6x4 - 400x300x270 mm / 5x4 - 400x300x210 mm / 4x3 - 355x275x345 mm / 4x3 - 400x300x330 mm / 5x4 - 355x275x255 mm / 5x4 - 400x300x290 mm - Controls: Siemens SIMATIC S7 PLC, B&R Power Panel HMI with ACOPOS servo drives, Danfoss VLT 5000 frequency drives, SEW MOVIDRIVE Equipment Nedpozk I N Sefx Alaocw - Palletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Depalletizer robot cell (Yaskawa Motoman NX100) with layer-gripper tooling - Logipack vertical pallet strapper - Pallet and crate roller/slat conveyors - Layer-forming / grouping table - Unloading table - Pallet magazine - Separate BMS-branded control cabinet - Safety fencing with light-curtain guarding Condition Used - complete, still installed; no longer in production (line stopped). Availability Available immediately. Location: Germany. Can be visited on request. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2016, Overview This CEEM TSS-1845 is a fully automatic side-seal shrink-wrapping machine with an integrated shrink tunnel, built in 2016. Products are fed on the conveyor, wrapped in transparent shrink film with a continuous side seal, and passed through the heat-shrink tunnel to form a tight, retail-ready transparent pack. The machine handles single items as well as grouped products. The side-seal unit is manufactured by Alpha Pack Europe (Italy) as model APSS-5022 and supplied under the Spanish CEEM brand (Grupo CEEM Packaging S.A., Elche). A constant-temperature thermal system provides uninterrupted sealing; product changeovers are made simply by turning the hand-wheels, without changing product guides, and product-length sensors allow automatic length control via the touch-panel control. The machine is still installed and under power and can be inspected on site. Technical data - Manufacturer: CEEM - Grupo CEEM Packaging S.A. (Elche, Alicante, Spain) - Model: TSS-1845 (side-seal unit OEM: Alpha Pack Europe APSS-5022) - Year of manufacture: 2016 - Machine type: fully automatic side-seal shrink-wrapping machine with shrink tunnel - Applicable film: POF / PE / PVC, thickness 0.05 - 0.08 mm - Max. sealing width: 500 mm - Max. product height: 220 mm - Packing speed: 30 - 45 packs/min - Conveyor speed: up to 30 m/min Ncedpfx Aozk H Nkelajw - Film reel: outer Ø up to 400 mm, core Ø 75 mm - Power: approx. 3 kW, 380 V - Compressed air: 5 - 6 bar - Weight: approx. 850 kg (side-seal unit; shrink tunnel additional) - Side-seal unit dimensions: approx. 2,100 x 1,960 x H 1,900 mm (excl. tunnel) Equipment - Automatic side-seal sealer with motorized film unwind and continuous side sealing - Heat-shrink tunnel with adjustable temperature control - Touch-panel control, hand-wheel format changeover, product-length sensors - Infeed conveyor Condition Used - in very good, clean condition; still installed and under power at the current site and available for inspection on request. Availability Immediately. Location: Spain. Dismantling, handling and truck loading can be quoted on request (EXW). The machine can be visited on request.

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data Ncjdpfszk Eqmsx Alasw - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Year of construction: 2018, Overview This complete can filling line was manufactured by COMAC and is designed for the filling of carbonated beer in aluminium cans. The line has a nominal output of 5,500 cans/hour for 44 cl cans and 6,000 cans/hour for 33 cl cans. Ncedpfezktw Usx Alaew The core machine is a COMAC ISO 14-2 filling and seaming monoblock with 14 electro-pneumatic isobaric filling valves and 2 seaming heads. The filling monoblock includes CO₂ flushing before filling, product tank pressure control, “no can – no fill” function, automatic height adjustment for different can sizes and CIP dummy cans suitable for acid and caustic cleaning up to 80°C. The self-adhesive labeller handles a maximum label length of 210 mm and a maximum label height of 80 / 160 mm at up to 6,500 cans/hour. The dry rinsing system uses approx. 0.25 Nl of ionized air per can, with a treatment time of approx. 3 seconds. Technical data - Line type: Complete can filling line - Manufacturer: COMAC - Year of manufacture: 2018 - Product: Carbonated beer - Nominal output: 6,000 cans/hour (33 cl); 5,500 cans/hour (44 cl) - Filling temperature: 2–4°C - CO₂ content: max. 5.5 g/L - Container type: Two-piece cans with SOT - Can formats: 330 ml and 440 ml - Can diameter: 66 mm - Can end: 202 - Product pressure: 3–4 bar - Water pressure: 3–4 bar - Air pressure: 6 bar - CO₂ pressure: 6–8 bar - Electrical supply: 3x400 V + N + T, 50/60 Hz - Auxiliary voltage: 24 V Scope of Delivery - Can Depalletizer | COMAC | For pallet size 1,120 x 1,300 mm; incl. empty can buffer table and platform | 2018 - Dual Channel Can Rinser | COMAC | Ionized Air Rinser | HEPA filtration, ionized air cleaning, 2-channel design | 2018 - Self-Adhesive Labeller | COMAC | Wrap-around labelling for empty cans; 6-plate carousel | 2018 - Filling / Seaming Monoblock | COMAC | ISO 14-2 | 14 isobaric filling valves / 2 seaming heads | 2019 - Double Shower | COMAC | Washing device after level control | 2018 - Beer Pump | COMAC | Centrifugal beer pump with frequency converter and pressure control | 2018 - Level / Lid Inspection | FT System | HS600-ST+CL003-RX+CT001-SE+ZT | X-ray level control / inspection system | 2019 - Can Twister 1 | COMAC | 180° can inversion before coding | 2018 - Can Dryer | BRB Globus | MEGA ADE 611 CW | 2019 - Ink Jet Coder | COMAC | Continuous inkjet coder, up to 162.5 m/min | 2018 - Can Twister 2 | COMAC | Return cans to upright position | 2018 - Carton closing system | SOCO System | T-10 | 2012 - Can / Case Conveyor System | COMAC | Conveyor system according to layout | 2018 - Conveyor Canopy | COMAC | Stainless steel canopy above empty can conveyors | 2018 - Change Parts | COMAC | – | Format parts for 33 cl cans and 44 cl cans incl. spouts, twisters and labeller parts | 2018 - Technical Documentation | COMAC | Documentation in English, paper copy and CD-ROM | 2018 Condition Used line – built in 2018, currently still installed. The line can be viewed on request. Availability Immediately available. Location: United Kingdom.