Used Manufacturing Facility for sale (40,670)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Ijdpszt Nbzefx Abvjig Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 203-654, controller model: Siemens S7-200, number of chambers: 1, usable tank capacity: 4,000 l, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The collection basin was renewed in 2022! TECHNICAL DETAILS Number of chambers: 1 Chamber volume: 4,000 l Cleaning agent: Surfaclean 936 or Surfaclean 980 Concentration: 5% Ijdpfxjzx S E He Abveig Ultrasonic power: 2 × 2,000 W Ultrasonic frequency: 25 kHz MACHINE DETAILS Control type: Siemens S7-200 Connected load: 75 kW Heating power: 57.5 kW Dimensions of the washing system: 1,900 × 2,800 × 1,700 / 3,300 mm with lifting device Dimensions of the collection basin: 3,600 × 3,300 × 400 mm Control voltage: 24 V DC EQUIPMENT Lifting device Lift truck with washing baskets Newly manufactured collection basin Ultrasonic cleaning Tools and fixtures Operating manual Wiring diagrams Maintenance history, partially available Note: The ultrasonic washing function was working during the last use. The lifting function for moving the container with the washing material did not function properly. The temperature control of the washing liquid did not function properly. The oil separation of the washing liquid did not function properly.

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Isdpfx Aezzd Dmsbvoig Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 89257, saw blade diameter: 450 mm, cutting height (max.): 150 mm, cutting width (max.): 250 mm, type of input current: three-phase, year of last overhaul: 2024, table length: 25,000 mm, A woodworking company in Latvia is offering a Weinig Dimter OptiCut 304 L optimization cross-cutting line for sale. The machine has had only two owners, both of which are well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated on one shift. It is equipped with 5 sorting cylinders; however, the sorting conveyor can be extended, and additional sorting cylinders can be installed if required. The machine can be inspected and demonstrated in operation at our facility. Isdsz Arqkjpfx Abveig Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability, and high-quality optimization results. The machine operates with excellent accuracy. No modifications have been made to the original factory configuration. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig finger-jointing line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information, or additional images and videos can be made available.

Condition: used, Empty weight: 12.500 kg Length: 62 cm Serial number: B151706 Machining center consisting of: - a NAKAMURA TOME CNC lathe, model: SUPER NTJ, manufactured in 2007 - a SAMSYS+ bar feeder, model: M3000 - a FANUC 18i-TB controller - Technical specifications: - Number of controlled axes: 9 axes - Number of simultaneously controlled axes: 4 - Maximum turning diameter: 190 mm - Maximum turning length: 620 mm Ijdpfezvccqsx Abvsig - Bar capacity: 51 mm (R/L)/ 65 mm (Left) - Chuck: 210 mm - Spindle speed: 5,000 rpm (∅51)/ 4,500 rpm (∅65 mm) - Spindle nose: A2-5 (∅51) / A2-6 (∅65) - Spindle bore: 63 mm (∅51) / 80 mm (∅65) - C-axis: 0.001° - 600 rpm - B-axis: -91° to +91° - 180°/s - 2 turrets: 24 stations - 12 powered tools - Powered tool speed: 60 to 6,000 rpm - X1 travel: 345 mm - X2 travel: 167.5 mm - Z1 travel: 1,240 mm - Z2 travel: 685 mm - Y-axis travel: 45 mm - Feed rate: X1/X2 16 m/min - Z1/Z2 40 m/min - Machine weight: 12,500 kg - Approximate dimensions: L 3,660 mm x W 2,320 mm x H 2,170 mm Hours on the counter: approximately 2,960 hours of use Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and...

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 109 h, axle configuration: 4x4, mast type: telescopic, lifting height: 290,000 mm, overall weight: 3,750 kg, empty load weight: 3,750 kg, fuel type: hybrid, Equipment: all wheel drive, An authorized SUBARU dealer in Łaziska Górne has a professional FALCON FS290 spider lift from 2014 for sale. The machine was directly imported from Denmark from its first owner. Since new, it has only operated for 109 original operating hours, putting it in very good technical and visual condition. It has current inspection certificates issued in Denmark. This is a self-propelled, wheeled version, equipped with its own drive system and a reliable HONDA gasoline engine. The lift can move independently around the worksite and perform tasks without access to an external power source. The FALCON FS290 provides up to 29 meters of working height and a maximum horizontal reach of approximately 14 meters. At the same time, its minimum transport width is about 80 cm, allowing it to pass through narrow gates and standard door openings. This is an ideal machine for working in halls, warehouses, shopping centers, industrial facilities, churches, theaters, airports, and anywhere where a large reach is required in a limited space. Key information: Brand: FALCON Model: FS290 Year of manufacture: 2014 Operating hours: only 109 original operating hours Type: spider lift Version: wheeled, self-propelled Gasoline engine: HONDA - power generator Number of owners: 1 Country of origin: Denmark Current inspection certificates issued in Denmark Technical and visual condition: very good Technical data: Maximum working height: 29 m Maximum platform height: approximately 27 m Maximum horizontal reach: up to approximately 14 m with a 100 kg load Horizontal reach with a 200 kg basket load: approximately 12 m Maximum basket load capacity: 200 kg Basket dimensions: approximately 1.40 × 0.80 m Transport length: approximately 6.30 m Minimum transport width: approximately 0.80 m Transport height: approximately 1.98 m Curb weight in standard configuration: approximately 3750 kg Turning radius: approximately 3.30 m Ground clearance: approximately 25–32 cm Slope climbing ability: approximately 5–15°, depending on the machine configuration Adjustable outrigger spacing The lift has adjustable outrigger settings, allowing the working area to be adjusted to the available space: Narrow setting: approximately 3.60 × 3.60 m Intermediate setting: approximately 4.60 × 4.60 m Iiodpfx Abjz Dh R Hoveg Wide setting: approximately 5.40 × 5.40 m Key advantages of the machine: Only 109 original operating hours One owner since new Powerful and reliable HONDA gasoline engine Self-propelled wheeled drive system Ability to move efficiently around the worksite Up to 29 meters of working height Horizontal reach up to approximately 14 meters Basket load capacity up to 200 kg Compact transport width Ability to pass through narrow entrances Adjustable outrigger spacing Low weight in relation to the achieved height Ability to work over obstacles Designed for indoor and outdoor use Current technical inspection certificates from Denmark Very good technical and visual condition We offer transport within the European Union. The stated price is net and applies to export and business customers. A substantial discount is possible for individual customers. Please contact us directly by phone to get your best price.

Condition: reconditioned (used), functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CLH TB510 PROFESSIONAL FLOOR SCRUBBERS - 2300m²/h TECHNICAL DATA: Model: Scrubmaster B45 CLH TB510 Manufacturer: Hako Type: Compact scrubber Country of manufacture: Germany Series: Professional Condition: NEW Wheel drive: Yes Charger: Built-in Power supply type: Battery Battery type: Sonnenschein GF12105 V (12V 105Ah) Water tank type: AntiBac Number of brushes in the set (pcs): 1 Brush working width (mm): 510 Squeegee working width (mm): 860 Water tank: clean / dirty (l): 42 / 42 Theoretical surface coverage (m²/h): 2300 Weight ready for use (kg): 230 HAKO SCRUBMASTER B45 CL TB510 EQUIPMENT ANTIBAC TANK 380mm floor nozzle (spraying and collecting) 150cm tube with spray gun 5m suction tube for manual collecting nozzle 510mm medium-hard disc brush 860mm curved squeegee Oil-resistant squeegee rubbers 2x Sonnenschein 12V 105Ah batteries Built-in charger ADDITIONAL FEATURES IN THE CLH VERSION The AntiBac tank used in Hako machines is made of a material with antibacterial properties. This reduces the growth of bacteria and fungi inside the machine, improving hygiene and reducing unpleasant odors. This solution is particularly useful in areas with high sanitary requirements, such as hospitals and food processing plants, and also helps maintain the tank in better condition for longer. The device is equipped with a manual spray and collection nozzle, enabling wet cleaning of hard-to-reach areas in corners and nooks. The 5m hose provides high flexibility and comfortable mobility. This is an ideal solution for work in production facilities with narrow, hard-to-reach areas beyond the main aisle. The spray gun built into the suction tube allows for easy dispensing of cleaning solution from the machine's tank, which is then collected by the device's built-in suction turbine. Iiodpsy E Rvasfx Abvog

Condition: excellent (used), Year of construction: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Injection Molding Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1,100 g Injection pressure: 2,000 bar Dosing volume: 1,212 cc Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1,100 x 1,000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-barless hybrid machine: energy-efficient and very quiet Operating hours: approx. 10,000 in automatic mode Air valves x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Injection unit is wear-resistant and corrosion-resistant Main drive of the machine: servo motor with inverter – energy saving Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: all 6 axes driven by electric servo motors: X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Iiedpfezy Itcox Abvsg Dimensions: Weight: 21,000 kg Length/Width/Height: 7.35 x 2.06 x 2.37 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz) Iiedpfoz Az Uvex Abveg

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) Iiedoziz S Djpfx Abveg • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Isdex Rhlcspfx Abvjig Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, overall weight: 22,400 kg, total length: 24,000 mm, total width: 3,500 mm, load capacity: 40 kg, power: 40 kW (54.38 HP), Equipment: documentation/manual, ABUS bridge crane, 40 t + 16 t auxiliary winch. Iisdpfxszzagqo Abvjg Year of manufacture: Crane and main winch: 1997. Auxiliary winch: 2003. The crane was installed in this facility in 2003. Span: 21,100 mm. ABUS wire rope winches. Radio remote control. Power supply: 3 x 400 V. Price excludes dismantling. Dismantling and transport can be arranged.

Condition: excellent (used), Year of construction: 2008, operating hours: 29,000 h, functionality: fully functional, MANDELLI Storm 2500 Horizontal Machining Center / Flexible Manufacturing Cell Manufacturer: Mandelli Sistemi S.p.A. Model: Storm 2500 Type: U 42 / 8000 Factory No.: XXXX Year of manufacture: 2008 Origin: Italy Control: Siemens Sinumerik 840D System Control: CswWin / Beckhoff Industrial PC Condition/Maintenance: Very good / Single-shift machine / Very low operating hours Technical Data: Ijdpfxey H D R Tj Abvjig X-axis travel: 2,600 mm Y-axis travel: 1,500 mm Z-axis travel: 1,800 mm B-axis: 360,000 positions / continuous APC / Pallet axis: 360,000 positions Rapid traverse linear axes: 35 m/min B-axis speed: 8 rpm Accuracy to VDI 3441: Positioning accuracy P: 10 µm Repeatability Ps: 5 µm Spindle / Head: U-head horizontal / vertical Spindle taper: ISO SK 50 Speed range: 37 – 6,000 rpm Spindle power: 44 kW Max. torque: 706 Nm Tool Magazine: 208 tool positions Rack tool magazine with automatic tool handling Max. tool length: 600 mm Max. tool diameter: 450 mm Max. tool weight: 35 kg Pallet System: Front transpallet / automatic pallet change system 6 pallets, each 1,000 x 1,250 mm 4 fixed stations Rotary unit for loading and unloading workpieces Electrical Data (as per nameplate): System: S2500 / 840D Rated voltage: AC 400 V, 3 Ph / PE Frequency: 50 Hz Current at full load: 178 A AC auxiliary voltage: 230 V DC auxiliary voltage: 24 V Standard: IEC 60204-1 / EN 60204-1 Chip Conveyor: Manufacturer: Meta Year of manufacture: 2007 Weight: approx. 1,100 kg Additionally, a screw conveyor is visible in the machine area. Equipment / Peripherals: Filtration unit Hydraulic power unit Chip conveyor Screw conveyor COSEMA peripheral unit Control cabinet system Coolant and lubricant periphery Separate operator panel Comprehensive pallet system Clamping Devices / Fixtures: Multiple heavy-duty angle plates, fixture plates, t-slotted/platen clamping plates, customer-specific clamping devices, and pallet setups are available. Tools / Accessories: Numerous SK50 tool holders, boring bars, boring tools, milling holders, drill and reaming tool holders, extensions, adapters, as well as various spare and standard tools are visible. Several hundred additional tool holders can be purchased on request. Optional / On Request: Apfel tool cabinets with extensive tool inventory Additional clamping devices and fixtures ELBO CONTROLLI tool presetting unit Workbenches / tool storage / racking systems by agreement The machine is in good, production-ready condition. This is a heavy-duty horizontal machining cell for the flexible complete machining of large and complex workpieces. The work area shows normal signs of wear characteristic of a production heavy machining system. The system must be removed from the facility in June 2026. Earlier availability possible by arrangement. Inspection under power is possible by appointment. All information provided to the best of our knowledge. Subject to errors, prior sale, and technical modifications.

Condition: excellent (used), Year of construction: 2011, operating hours: 6,500 h, functionality: fully functional, machine/vehicle number: 52180, grinding length: 1,000 mm, grinding width: 750 mm, total height: 2,755 mm, total length: 3,840 mm, total width: 2,940 mm, workpiece weight (max.): 690 kg, grinding height: 410 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 1,600 m/min, feed rate Z-axis: 2,000 m/min, table length: 1,000 mm, table load: 690 kg, type of input current: three-phase, table width: 750 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1,000 rpm, overall weight: 8,500 kg, grinding spindle motor power: 10 W, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 1,500 rpm, grinding spindle speed: 1,430 rpm, warranty duration: 12 months, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Used Surface Grinding Machine ELB-Schliff Smart BL10 HYD Comfort For sale is a used Smart BL10 HYD Comfort surface grinding machine from the manufacturer ELB-Schliff. Equipment: - Water tank with automatic paper band filter - Hydraulic unit with a hydraulic cooler - Mounted table dresser - MPM balancing device including integrated speed sensor, vibration sensor and power supply Iiodpfxjz Au I Ss Abvjg - Rail guidance in the Y and Z axes - X-axis is hydraulically controlled with V/flat guide Renewed and overhauled components: - Z-axis guides professionally re-scraped - Guide rails and guide carriages of the Z-axis renewed - The operating software (B&R) has been updated to the latest version The machine is in operating condition at our facility and can be inspected by appointment. A test run is also possible, so you can see the condition and working quality of the machine on site. We offer a 12-month warranty on the machine. Upon request, we also offer installation and commissioning of the machine, as well as training directly at your facility. Even after the purchase, we are happy to be your reliable contact for service, maintenance, and technical support regarding the machine.

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Year of manufacture: 2012 Iiedpfx Aezy I Rbsbvjg Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: used, A fully operational metal processing company is for sale, complete with all production equipment, a customer base, and ongoing orders. This is more than just a sale of equipment – it’s the transfer of a thriving business with a current workforce of 6 employees. Production is uninterrupted; the company fulfills existing orders, operates on a subcontracting basis, and has secured future contracts through won tenders. The company boasts a modern equipment park, mostly from 2024-2026, allowing it to perform the entire main cycle of sheet metal processing: laser cutting of sheets and tubes, bending, laser and conventional welding, grinding, and other metal processing operations. Production Facilities The premises are rented under favorable terms: Production space: approximately 400 + 600 m² An additional second floor is available, offering approximately 800 m² for further expansion Overhead cranes are installed in the premises Low rental cost Main Production Equipment 2026 HN-6020 Sheet Metal Laser Cutting Machine Laser power: 12 kW Working format: 6000 × 1500 mm Metal thickness to be cut: up to 10 mm 2025 Hongnili Tube Laser Cutting Machine Raycus laser source Laser power: 3 kW Tube length: up to 6 m Wall thickness to be cut: up to 10 mm 2025 LEMANS B320/4 Bending Press Equipped with bending press tooling 2024 Hongniu HN-3000W Laser Welding Machine Power: 3000 W Other Production Equipment Automatic grinding machines for parts after laser cutting Bevel grinding machine Band saw Welding machines Various production tools and auxiliary equipment A significant stock of sheet metal is available in the warehouse Transportation and Handling Equipment Electric Jungheinrich forklift Diesel Linde forklift Volkswagen Crafter cargo van Included with the company: The entire operational company is for sale, including production equipment, an existing customer base, ongoing projects and orders, won tenders, subcontracting activities, a team of 6 employees, metal stock, transportation, and other equipment and tools necessary for production. This is an opportunity to take over an already functioning metal processing company and continue production immediately, without the need to build a production base and assemble equipment from scratch. We will provide more information about the company, equipment, and sale conditions upon request. The company and the operational production can be viewed in advance by appointment. I have not specifically mentioned the company name, location, and sale price here – it is quite logical in this type of advertisement to reveal some information only to a serious buyer. Once we have the exact names/models of the laser manufacturers and the parameters of the LEMANS press, we can further refine the technical details. Iedpsz A Rwasfx Abveig

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles Iisdpfeyzh Ulex Abvog consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Iisdpfx Abjzkhtqovog

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Iedjzy In Tjpfx Abvsig Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Wittmann Battenfeld EcoPower 110/350 / All-Electric Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 cc Clamping Unit: Clamping force: 110 t Tie bar spacing: 470 x 420 mm Platen size: 682 x 682 mm Ejector: electric Clamping unit: toggle lever Control system: UNILOG B8 - Touchscreen Additional features: Machine in excellent technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Euromap 67 Robot interface Iiedpfx Abezy Ilrjveg Air valve x 1 Hydraulic core pull x 1 Hot runner control system Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Iiedpfxew Tulgs Abvog Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Isdpfx Abezy Inajvsig Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Iiodezy Imispfx Abvsg Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side-Mounted Arburg Multilift H Robot Injection Unit: Screw Diameter: 55 mm Shot Weight: 434 g Injection Pressure: 1,650 bar Dosage Volume: 474 ccm Clamping Unit: Clamping Force: 150 t Tie Bar Distance: 520x520 mm Platen Size: 695x695 mm Ejector: electric Clamping System: toggle lever Control System: SELOGICA touchscreen Additional Equipment: - Hybrid machine: high-speed, energy-efficient, and very quiet - Euromap 67 - Robot interface - Control with air valve - 1x hydraulic core pull - 12x hot runner control circuits - Injection unit: hardened – bimetallic - Main motor: servomotor driven by frequency inverter – energy saving - Injection unit powered by servomotor controlled by inverter - Machine equipped with nitrogen accumulator/cylinder for rapid operation (additional charge) Isdjzy I Nqjpfx Abveig - Central lubrication - Automatic mold height adjustment - Kistler sensor for mold pressure control - The injection molding machine was operated in a so-called "cleaning room" and includes additional protective measures against contamination and two vapor absorbers - Side-mounted Arburg Multilift H robot Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y-, and B-axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Robot and conveyor belt available at additional cost Dimensions: Weight: 6,680 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Arburg 370E 600-170 with Arburg Multilift Select robot / All-electric injection molding machine Year of manufacture: 11.2017 Injection unit: Screw diameter: 30 mm Shot weight: 77 g Injection pressure: 2000 bar Dosage volume: 85 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping system: toggle Control system: SELOGICA - touchscreen Additional equipment: Production line with Arburg Multilift Select robot and conveyor belt All-electric machine: high-speed, energy-efficient, and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 24 zones Hardened injection unit – bimetallic Main motor: servo-driven with inverter for energy saving Injection unit driven by servo motor controlled by inverter Iijdjzy Igcopfx Abvsg Parallel movements Central lubrication Machine with two cylinders / nitrogen accumulator (extra charge for high-speed operation) Integrated Arburg conveyor belt and sorting flap Arburg Multilift Select robot, 6 kg, transverse Year of manufacture: 11.2017 4-axis robot: 3 axes servo-driven (electric), C axis pneumatically driven Stroke (axes): X-600, Y-800, Z-1800 mm Robot safety package Robot with adapter and safety housing Purchase of robot and conveyor belt possible at additional cost Dimensions: Weight: 3600 kg Length/width/height: 4.00x1.45x2.04 m All offered machines are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical demonstrations at our facility in Łódź. Price: On request