Used Screw Manufacturing for sale (46,301)

Condition: new, Year of construction: 2012, functionality: fully functional, machine/vehicle number: SB306, Equipment: 3rd hydraulic function, Cold forming machine, 3 dies, 3 blow, Essebi model SB 306, new, 2012, never used + with Schwer+Kopka system. Technical specifications: Wire diameter (500N/mm2): 2-8 mm Cut-off length: 4-80 mm Die ejection length: 4-60 mm Forming power: 40 T Main motor power: 20 kW Max. speed (pieces per minute): 280 Bush cutting: 28 mm Die hole diameter: 50 mm Punch diameter 1st: 32 mm Credpfez A Umrex Aktei Punch diameter 2nd: 38 mm Punch diameter 3rd: 42 mm Machine size: 350 x 200 x 200 cm Net weight: 7,000 kg

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 220287, NS60E Nakashimada double-pressure press from 2022, like new, cutting length 95 mm, wire cutting 7 mm Cedpfewiwqxsx Aktori

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, Very well-preserved double-pressure press DM3 from Heuer Hammer. Immediately ready for use. Codpfjxywlnex Aktsri

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 52 mm, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 8 mm, Flat Die Thread Rolling Machine Ingramatic RP2 V # 408 Year of manufacture: 1984 Output: 200-410 pieces per minute Diameter: 3.5-8 mm Blank length: 6-90 mm Thread length: 52 mm Tool dimensions: 130/115x30x54 Power: 12 kW Credpfsy D Na Ujx Aktji

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Very well-maintained double-pressure press DM2 by Heuer Hammer. Immediately ready for use. Cjdpfxjxywkwj Aktsri

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: N32469, National double printing press M68, used, year 1974, Crjdpfx Akewiuy Rotsi

Condition: used, Year of construction: 1984, functionality: fully functional, thread length: 48 mm, total length: 75 mm, metric thread diameter (min.): 2 mm, metric thread diameter (max.): 6 mm, Ingramatic RP 1 # 451 1984 230-600 pieces 2.5–6 mm Blank length: 4–75 mm Thread length: 48 mm Tool dimensions: 95/85x25x48 Power: 12 kW Cjdpoy D Nghefx Aktjri

Condition: used, BOGE Screw compressor / Industrial compressor BOGE C 9 Screw compressor – 7.5 kW – 10 bar – 1,060 m³/min For sale is a used screw compressor from the manufacturer BOGE, model C 9, manufactured in 2017. The compressor is suitable for supplying compressed air to machines, workshops, production facilities, and for general industrial compressed air applications. Technical data: Manufacturer: BOGE Model: C 9 Type of equipment: Screw compressor Year of manufacture: 2017 Volume flow: 1,060 m³/min Final compression pressure: 10 bar Motor power: 7.5 kW Motor speed: 3000 min⁻¹ Control: BOGE base control Digital operating and display panel Equipment: BOGE base control Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking Application areas: Industrial compressed air supply Production facilities Workshops Machine supply Manufacturing companies General compressed air applications Scope of delivery: 1 × BOGE C 9 screw compressor Condition: Cedpjzxpi Nofx Aktsri Used Visual condition as shown in the pictures BOGE operating display shown in the switched-on state Nameplate available Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm Transport data: Weight BOGE C 9: approx. 215 kg Other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 84KB2, Progressive header SACMA SP.240 Fully functional, operational, ready to produce Available for any test Technical information: Number of dies: 3 Heading tonnage: 550 KN Maximum cutoff diam (500N/mm²): 10,5 mm. Csdpfx Akoy Nx Hbsteri Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 22,5 KW Diam. dies: 54 mm. Length dies: 90 mm. Diam. punches: 38 mm. Net weight: 10.600 kg. Gross weight: 12.300 kg. Condition: very good, operational Year: 1990 Ready for immediate delivery Machinery runs without any problems. Available c/o HBR srl - Calolziocorte (LC) Italy

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Credswl Iw Uspfx Aktji

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Crodpfjwiwqfox Aktji

Condition: ready for operation (used), functionality: fully functional, Very well-maintained dual-pressure press DL5 from Heuer Hammer. Immediately ready for operation. Crodsxzft Nopfx Aktji

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 Codpfx Ajur N Dasktjri The machine is ready for immediate use!

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Crjdpfx Aju Szucsktsi Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Credsyy U Shjpfx Aktsi Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Crsdpfx Aoxw Tumjktsi Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Condition: used, Year of construction: 1968, Hilgeland ME2 VM trimming press for sale. Crsdpfour N Ewsx Aktoi

Condition: excellent (used), For wire diameters of 17.2 mm Drawing die diameter (capstan): 1100 mm Cedpfj Afumdex Akteri Drawing speed: 10 m/min Machine weight: 6000 kg For screw manufacturing/cold forming

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. Cjdpfx Ae Ahppdoktsri This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call. Crsdpfxjznkx Ds Aktji

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Matricola: 40EV.147, The EBC40 HT/42D 600rpm extruder was manufactured by Comac (year of manufacture 2012). The motor is an AC motor with a power of 60kW. The extruder is equipped with an Omron-made PLC. The cabinet is fitted with an air conditioner. A degassing system with a 2.2kW liquid ring vacuum pump is included; the extracted gases are allowed to settle in a dedicated container for easy cleaning. The extruder is equipped with a twin-screw extrusion head, including a pressure and temperature transducer (newly supplied). Below are the specifications of the proposed model: Screw diameter: 42 Crodpfj Afnqcex Aktsi Screw speed: 600rpm Motor power: 60kW L/D ratio: 42 Effective penetration ratio: 1.5

Condition: like new (used), Year of construction: 2023, Like-new screw compressor with a 3.5 kW motor, manufactured in 2022. Codpfxozdcdro Aktjri Includes an air dryer made by Airtec, model Pro 1100, also like new, manufactured in 2023. 0.38 kW, with a 220 V plug.

Condition: used, Year of construction: 2013, Used RENNER RS 22 screw compressor for industrial compressed air supply, with a delivery rate of 3,100 l/min and a permissible operating overpressure of 8 bar. Cjdpj Ahy Icofx Aktjri Manufacturer: RENNER Compressors Type: RS 22 Year of manufacture: 2013 Serial number: 306124 Power requirement: 22 kW Delivery rate: 3,100 l/min Delivery rate: 3.1 m³/min Permissible operating overpressure: 8 bar Design: Screw compressor Version: Sound-insulated compact housing Controls: Start and stop buttons Displays: Operating hour counter, temperature display, pressure gauge Condition: Used

Condition: good (used), Year of construction: 2021, operating hours: 22,633 h, machine/vehicle number: 1220-8235345, Offer 26136 Screw compressor with integrated refrigeration dryer + air receiver Technical data: - Control system: SIGMA CONTROL - Operating hours: approx. 22,633 h - Load hours: approx. 10,983 h - Operating pressure: 11 bar - Delivery rate: 3.5 m³/min - Motor speed: 2960 1/min - Drive: 400 V / 18.5 kW - Integrated refrigeration dryer - Space requirement: approx. W 800 x D 1650 x H 1550 mm - Weight: approx. 650 kg - Öewamat Crjdpfx Ao Aba Npjktji - Compressed air receiver, manufacturer OKS, 500 L, year of manufacture 2021 - Compressed air filter

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack Csdpfeztx Anex Aktjri -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg