6
Exhibit available immediately:
New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer
Pressure: 10 bar
Nominal power: 15 kW
Delivery rate: 2.11m³ / min
Baz7q9ff0t
Sound level: 67 dB (A)
Compressed air outlet: 1 "
Dimensions length x width x height: 750 x 1240 x 1260 mm
Weight: 395 kg
Operating hours: 0
Visit our store.
We always have a large selection of new and used compressors in stock!
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor
-Delivery quantity: 4.0 m³/min
-Motor power: 30 kW
Lvzy7
-Construction: encapsulated
-Max. Pressure: 10 bar
-Operating hours: 22.004 H
-Idle hours: 10,090 H
-Dimensions: 820/1700/H1930 mm
-Weight: 732 kg
3
feed pressure 10 bar
Effective free air delivery 2.200 L/min
Required air-pressure G 3/4 "
motor 400 Volt 50 Hz
power capacity 15,0 kW
dimensions of the machine ca. 1240 x 650 x 950 mm
weight of the machine ca. 325 kg.
Dwmosq
** Special price / on request
** List price: 7.010 euros
Our SOLIDscrew screw compressors in the standard version
you get from 4 to 75 kW. The particularly effective aftercooler and the
Microprocessor controls SOLIDcontrol are one of SOLIDair's
A matter of course!
The...
4
MAWP: 8,5 bar - 123 psi - 0,85 MPa; Qv: 118,1 l/s - 250,3 cfm - 7,09 m³/min; Voltage: 400 V; Freq.: 50/60 Hz; 3Ph
Psi9n
3
direct-coupled screw compressor
Year of manufacture 2020
Absolutely maintenance-free drive with maximum energy efficiency due to direct-coupled coaxial screw compressor
Standard EasyTRONIC II control prevents motor overload, reduces wear and ensures longer service life
High cooling effect and lower noise level due to thermostatically controlled radial fan
Longer service life of the unit and lower fluctuations in oil temperature thanks to thermostatically controlled fan, optimum cooling air flow...
2
output 380 Volt/32AP
volume 50 L
Bfgpghtpsi
weight of the machine ca. 6,4 t
3
feed pressure 8 bar
liter capacity 1,200 m³/min
Number of working hours 28869 h
turning speeds 3000 U/min
total power requirement 7,5 kW
weight of the machine ca. 0,235 t
dimensions of the machine ca. 480 x 990 x 1235 mm
Hm2lhcy0c
Soundproof screw compressor with electronic control
- refurbished -
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor
-Delivery quantity: 35.1 m³/min
-Motor power: 200 kW
-Encapsulated construction
-with oil/water heat exchanger
-Max. Pressure: 8 bar
-Operating hours: 61,107 h
-Year of construction: 1990
-Dimensions: 3100/1900/H2250 mm
Hhw3al20g
1
feed pressure 10 bar
Effective free air delivery 420 L/min
motor 400 V
B09zrvf8
0 270 Liter
weight of the machine ca. 170 kg.
total power requirement 3,0 kW
turning speeds 800 U/min
** Special price / on request
** List price: 1,950 euros
Furnishing:
- stationary industrial piston compressor
- with the container lying on its side
6
feed pressure 10 bar
Power 5.5 KW
Receiver / L
volume flow 0,72 m³
Bwcvl7oyzb
weight ca. 450 kg
intake pressure 1,0 bar
4
new screw compressor
Year of manufacture 2020
Belt-driven screw compressor on tank with attached
attached refrigeration dryer
Thanks to direct coupling of motor and compressor stage, the entire power of the electric motor is transmitted to the compressor stage, thus ensuring optimum efficiency
Star-delta switch as standard
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, preventing motor overload, reducing wear and extending service life
High cooling effect and...
5
Kaeser Airtower 26 screw compressor
Bvacs0zjxj
7
Effective delivery rate approx. 1050 l/min
Maximum pressure 10 bar
tank capacity 270 l
Air outlet ½ "
UNIT 1
Dimensions and weights
Length approx. 1200 mm
width/depth approx. 650 mm
Height approx. 1540 mm
Weight approx. 295 kg
Electrical data
Input power electric motor 7,5 kW
Supply voltage 400 V
Phase(s) 3 Ph
Current type AC
Mains frequency 50 Hz
Noise emission
Sound pressure level Lp 62 dB(A)
Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13
Engi...
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor
Beuq0rq0la
-Screw compressor with: refrigeration dryer
-Delivery quantity: 0.97 m³/min
-Motor power: 7.5 kW
-Max. Pressure: 11 bar
-Operating hours: 29739 h
-Load hours: 19217 h
-Construction year:
-Dimensions: 610/760/H1290 mm
-Weight: 260 kg
1
feed pressure 15 bar
Effective free air delivery 375 L/min
motor 400 V
0 90 Liter
weight of the machine ca. 150 kg.
Ben97s0gcb
dimensions of the machine ca. 1106 x 540 x 1037 mm
** Special price / on request
** List price: 1,800 euros
Furnishing:
- Mobile piston compressor / easy handling
- The tried and tested for professional craft and industrial companies.
- V unit with proven solid compressor technology
- oil-lubricated
- V-belt drive
- two-stage
- Stopcock on the container
4
Speed 3000 U/min.
intake pressure 1,0 bar
weight 205 kg
total power requirement 7.5 kW
Phase: 400V
Volume rate of flow: 1,06m3
Stage pressures: 10 bar g
Suction Pressures: 1,0 bar
Full load curennt: 17A
Speeds: 3000 U/min.
Installed motor capacity: 7,5kW
Jw2dfe
2
SCREW COMPRESSOR type KAESER SM 12
second hand
complete with 500 Lt. vertical tank and dryer unit
working hours 870
motor power Hp 10 ( Kw 7,5 )
Suhpw0
working pressure bar 11
volt. 380/50
1
- Artikel-Nr.H405100
- Verdichtungsenddruck 10 bar
- Arbeitsdruck9 bar
Dxrigyud
- Volumenstrom bei Arbeitsdruck 700 l/min
- Verdichterdrehzahl 5150 min-1
- Nennleistung Antriebsmotor 5,5 kW
- Elektrischer Anschluss 400 V / 3Phasen / 50 Hz
- Schutzart Antriebsmotor IP 55
- Erforderlicher Kühlluftbedarf 1000 m³/h
- Umgebungstemperatur min. / max. +5CC / +40CC
- Füllmenge Kühlöl 2 l
- Schalldruckpegel (LPA1-DIN 45635 T13) 66dB(A)
- Anschluss Luftabgang 1/2*i
- Abmessungen (B x T x H) 620 mm x 600 m...
6
The AIRCENTER SM 13 offers more than the possibility of efficiently generating, processing and storing compressed air on a minimal footprint: forward-looking technology with high user benefits in a modern design, the principle of "plug & work" in a new definition. All system components - screw compressor, refrigeration dryer and under-mounted compressed air tank - are enclosed in a housing and also form a harmonious whole visually. Energy efficiency, ease of maintenance, long service life and op...
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor, Refrigeration Dryer
Bfvec0cctt
-Atlas Copco refrigeration dryer: FD 700
-Volume flow: 700 l/s
-Connection: 380/415 V
-Max. Pressure: 10.5 bar
-Dimensions: 1690/1220/H1420 mm
-Weight: 440 kg
1
feed pressure 13 bar
Dwsby3
liter capacity 2,13 m³/min
total power requirement 18,5 kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. 1x1x1,2 m
6
a used very well-preserved compressed air system consisting of a screw compressor RENNER RS-22 including cyclone separator with automatic. Condensate drainage
Air dryer BOGE DS60
Oil and water separator ÖWAMAT BEKO 5R
Filter Parker ANK Zander 800 G13XP4E and G13XP4
Control to the dew point monitoring
Bquy8xt
further technical data see PDF document.
1
SCREW AIR COMPRESSOR type FINI ROTAR KSC 10
second hand machine
motor power Hp 10 ( Kw 7,5 )
bar 10
lt / min. 900
volt. 380/50
Buictrkwcm
3
used screw compressor
Year of manufacture 2011
regularly serviced
speed controlled
Motor 7,5 kW
1050 l/min
with refrigeration dryer
10 bar
Noise level 63 db(A)
Weight 210 kg
Availability: Short term
Location: Solingen
Bxt8ai28ll
7
The AIRCENTER SM 13 offers more than the possibility of efficiently generating, processing and storing compressed air on a minimal footprint: forward-looking technology with high user benefits in a modern design, the principle of "plug & work" in a new definition. All system components - screw compressor, refrigeration dryer and under-mounted compressed air tank - are enclosed in a housing and also form a harmonious whole visually. Energy efficiency, ease of maintenance, long service life and op...
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor
-Delivery quantity: 0.89 m³/min
-Motor power: 7.5 kW
Nswgj
-Max. Pressure: 10 bar
-Operating hours: 20292 h
-Load hours: 17666 h
-Year of construction: 1999
-Dimensions: 680/700/H1060 mm
-Weight: 272 kg
6
feed pressure 10 bar
liter capacity 2.200 m³/h
Number of working hours 12289 h
total power requirement 15 kW
weight of the machine ca. 0,245 t
Bu3bnrv9b3
2
Technische Daten: - NEU, original verpackt
- Verkaufsgeräte-Nr. H411080
- Verdichtungsenddruck 8 bar
- Arbeitsdruck 7 bar
- Volumenstrom bei Arbeitsdruck 1700 l/min
- Verdichterdrehzahl 7370 min-1
- Nennleistung Antriebsmotor 11 kW
- Elektrischer Anschluss 400 V / 3 Phasen / 50 Hz
- Schutzart Antriebsmotor IP 55
- Erforderlicher Kühlluftbedarf 1800 m³/h
- Umgebungstemperatur min. / max. +5CC / +40CC
Dwrxnu
- Füllmenge Kühlöl (Öl-Behälter/gesamt) 5 l/6 l
- Schalldruckpegel (LPA1 - DIN 45635 T13) ...
Kaeser Aircenter SK 22
Manufacturer: Kaeser
Type: Aircenter SK 22
Year of manufacture: 2012
Condition: used, ready for use
Load hours: 3300h
Operating hours: 18187h
Pressure 11 bar
Effective delivery rate at 10 bar* 1,68 m³/min
Nominal power drive motor 11 kW
Permissible pressure loss for exhaust air duct 30 Pa
Max. usable warm air volume 2,500 m³/h
Max. usable heat output "warm air" 13.2 kW
Max. usable heat output "Hot water" 9.4 kW
Required supply air opening 0.45 m²
Protection class drive mot...
15
Good condition and few operating hours , HU 11 / 21 , UVV 08 / 21 , tires good , new starter batteries , Zul Ges. Gew. 4200 kg , L x W x H 5600 x 2450 x 1830 mm , Max. Pressure 9.6 bar , Air performance 292 l / S , Mercedes engine OM366LA , Road approval for 80 km/h , Ready for immediate use , Errors and omissions excepted
Kfxrui29
1
! ! ! SPECIAL OFFER -> STOCK MACHINE -> IMMEDIATELY AVAILABLE ! ! !
Machine type: Screw compressor
Manufacturer: RENNER
Model: RSD-B ECN 7,5 - 10 bar
Offer type: brand new machine
Technical data:
delivery volume: 1020 l/min
Boiler capacity: 270 litres
Dji8kdj
maximum pressure: 10 bar
Drive: 7,5 kW
Weight: 283 kg
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor
-Delivery quantity: 2.23 m³/min
-Motor power: 15 kW
-Construction: encapsulated
-Max. Pressure: 8 bar
-Operating hours: 24783 h
-Dimensions: 760/830/H1170 mm
-Weight: 388 kg
Iejx7aj
4
engine power: 7,5 kW
flow: 1050 l / min at 7 bar
Noise level: 72 dB(A)
Bzovzjjzo2
Shutdown at: 110 ° C
Connected load: 400 V / 50 Hz
Dimensions W x D x H: 680 x 790 x 800 mm
Weight approx: 159 kg
colour: Blue / Grey
Suitable for providing compressed air up to 1050 l / min at 7 bar.
1
- Artikel-Nr.411100
- Verdichtungsenddruck 10 bar
- Arbeitsdruck 9 bar
- Volumenstrom bei Arbeitsdruck 1500 l/min
- Verdichterdrehzahl 6600 min-1
- Nennleistung Antriebsmotor 11 kW
- Elektrischer Anschluss 400 V / 3 Phasen / 50 Hz
- Schutzart Antriebsmotor IP 55
- Erforderlicher Kühlluftbedarf 1800 m³/h
0mxhzac
- Umgebungstemperatur min. / max. +5CC / +40CC
- Füllmenge Kühlöl (Öl-Behälter/gesamt) 5 l/6 l
- Schalldruckpegel (LPA1 - DIN 45635 T13) 64 dB(A)
- Anschluss Luftabgang 3/4*i
- Abmessunge...
6
feed pressure: 10 bar
liter capacity: l
total power requirement: 16 kW
output: 15 KW
volume capacity: 1.93 m³/min.
Number of working hours: 2 h
noise level: schallschutzgedämmt dB(A)
machine weight approx.: 550 kg
dimensions L x W x H: 1,9 x 0,7 x 1,65 m
Oil-Injected Screw Compressor - unused /slight deformation on the sheet metal)
Bg79pkgrgp
Consists of:
1. Compressor:
- max. 10 bar working pressure, output 15 kW, volume flow 1.93 m³/min. turning tool 2.940 rpm.
2. Air pressure tank:
- type A...
8
feed pressure 10 bar
Effective free air delivery 1.000 L/min
motor 400 V
0 250 Liter
weight of the machine ca. 410 kg.
total power requirement 7,5 kW
range L-W-H 1915 x 650 x 1640 mm
** Exhibition machine / not yet in use
Bvxoe2wrhw
** new BOGE SOLID model series
** List price: 8.170 euros
** Made in Germany
Furnishing:
- with container and dryer / can be used immediately
- SOLIDcontrol microprocessor control
- Network pressure sensor
- Belt-driven drive system
- low compressed air temperatu...
4
feed pressure 10 bar
liter capacity 1450 l
turning speeds 5480 min-1
sound - pressure - turn off level ca. max. 82/72 dB
oil volume 4 l
Number of working hours 24100 h
Bw3rzc2hmx
total power requirement 11 kW
weight of the machine ca. 205 kg
dimensions of the machine ca. 1,2 x 1 x 0,95 m
Air-cooled screw compressor with Boge Autotronic control, last maintenance
11/2020.
Machine dealer with own stock of 2500 m².
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor
-Delivery quantity: 1.5 m³/min
Jfdkizh
-Motor power: 11 kW
-Max. Pressure: 10 bar
-Operating hours: 17475 h
-Dimensions: 1200/900/H1090 mm
-Weight: 336 kg
This 2008 Ingersoll Rand 30kW Variable Speed oil flooded air compressor provides up to 164cfm at 10bar with run hours of 35530. The outlet connection is 1 1/4″ and is 612kg, 1630L x 724W x 1328H (mm)
Fh9b7dd
5
Screw compressor, oil free
Oyz72
Max. pressure: 7,5 bar
Electric power: 113 kW
Speed: 2950 1/min
1
- Artikel-Nr. H407100
- Verdichtungsenddruck 10 bar
- Arbeitsdruck 9 bar
C2bqqwkie
- Volumenstrom bei Arbeitsdruck 1010 l/min
- Verdichterdrehzahl 4350 min-1
- Nennleistung Antriebsmotor 7,5 kW
- Elektrischer Anschluss 400 V / 3 Phasen / 50 Hz
- Schutzart Antriebsmotor IP 55
- Erforderlicher Kühlluftbedarf 1080 m³/h
- Umgebungstemperatur min. / max. +5CC / +40CC
- Füllmenge Kühlöl (Öl-Behälter/gesamt) 2,5 l / 3 l
- Schalldruckpegel (LPA1 - DIN 45635 T13) 67 dB(A)
- Anschluss Luftabgang 3/4*i
- A...
8
feed pressure 10 bar
Bypfz78qmu
Effective free air delivery 1.450 L/min
motor 400 V
0 250 Liter
weight of the machine ca. 452 kg.
total power requirement 11,0 kW
range L-W-H 1915 x 650 x 1640 mm
** Exhibition machine / not yet in use
** new BOGE SOLID model series
** List price: 8.170 euros
** Made in Germany
Furnishing:
- with container and dryer / can be used immediately
- SOLIDcontrol microprocessor control
- Network pressure sensor
- Belt-driven drive system
- low compressed air temperat...
2
The machine is ok. Working hours 37.000
Bxp8ed03ci
New complete inspection for 3 years
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor
-Screw compressor: with refrigeration dryer
-Delivery quantity: 0.97 m³/min
-Motor power: 7.5 kW
-Max. Pressure: 11 bar
-Operating hours: 41826 h
-Load hours: 15884 h
Epwf9jnw8
-Year of construction: 2004
-Dimensions: 820/670/H1285 mm
-Weight: 272 kg
An Atlas Copco GA50VSD 2004 air compressor, 68K hours however had a full overhaul to include new coolers and hoses, new air end and complete service at 43K hours. 50kW, 415v variable speed. 324cfm max 13bar
Rbh8qb0r
9
The compressor is in good condition and maintained. During the maintenance has been exchanged the oil, oil filter and air filter.
- Working hours only 1527h and on load 699h
- A simple and reliable construction
- Top on 200L air tank
- Compact
- Control unit Boge Basic, where it is possible to change the compressor pressure and other important operating parameters, displays a variety of error messages and future maintenance.
Warranty 6 months.
It is possible to get from us the air dryer, air ...
3
The screw compressor WALTER SFTG 11 SXP COMBO was produced in 2021. It is supplied with the WALTER WDF 100 refrigeration dryer.
Characteristic data of the WALTER SFTG 11 SXP compressor:
Gxzoes
- working pressure: 10 bar
- capacity: 1500 l / min.
- power: 11 kW
- connection: R 3/4 "
- machine dimensions (length x width x height): 2100 x 650 x 1708 mm
- weight: 467 kg
- WDF dehumidifier with 1 and 0.01 micron filters
8
feed pressure 10 bar
Effective free air delivery 700 L/min
motor 400 V
0 250 Liter
weight of the machine ca. 397 kg.
total power requirement 5,5 kW
range L-W-H 1915 x 650 x 1640 mm
Cx2xr0e0
** Exhibition machine / not yet in use
** new BOGE SOLID model series
** List price: 8.170 euros
** Made in Germany
Furnishing:
- with container and dryer / can be used immediately
- SOLIDcontrol microprocessor control
- Network pressure sensor
- Belt-driven drive system
- low compressed air temperature d...
