Used Screw Compressor-Msk I for sale (58,379)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 48,600 h, power: 37 kW (50.31 HP), volume flow: 4.9 m³/h, pressure: 10 bar, Mahle Screw Compressor, Screw Compressor, Compressor; Mahle MSK D37, 37 kW Screw Compressor, Used Machine Manufacturer: Mahle Type: MSK D37 Year: 1995 Dimensions: 1480 x 845 x 1010 mm Operating Hours: 48,600 Kljdpfx Asq Nmpveb Tsn Maximum Operating Pressure: 10 Bar Power: 37 kW Delivery Quantity: 4900 l/min; 4.9 m3/h

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Kledpfoyb Sdijx Ab Tsn

Condition: used, Year of construction: 1999, Lot consists of: (1) Screw compressor Technical Details: Rated power: 15 kW; Motor speed: 3000 rpm; Operating pressure: 8 bar Kjdpfeylapbex Ab Toln

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch - 36004 Switch-on hours read - 19256 Load hours read Kedpefmim Uofx Ab Tjln - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Klsdpfxeiyu Ifo Ab Tjn Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Kaeser SM 9 Screw Compressor Manufacturer: Kaeser Kjdpfx Asylwkvjb Toln Model: SM 9 Year of manufacture: 2011 Max. operating overpressure: 11.0 bar Rated power: 5.5 kW Refrigeration dryer TA 11 included Year of manufacture: 2011

Condition: excellent (used), Year of construction: 2015, operating hours: 75,906 h, functionality: fully functional, Screw compressor GA90VSDFF. Inverter and dryer integrated. 90 kW with 13 bar and 15.59 m3/min. Heat recovery system (WRG) installed. New compressor stage at approximately 35,000 operating hours. Kledpoyllp Tefx Ab Ten

Condition: excellent (used), Year of construction: 2017, operating hours: 26,862 h, functionality: fully functional, Atlas Copco GA75VSD screw compressor. Integrated frequency inverter. 75 kW with 13 bar and 15.09 m3/min. Equipped with heat recovery system (WRG). Kljdpeyllp Hefx Ab Tjn

Condition: excellent (used), 11 kW 2016 with dryer, 1000 l tank, 1600 l/min Klodpfxoyk Iyfj Ab Tjn

Condition: excellent (used), Year of construction: 2015, operating hours: 51,498 h, functionality: fully functional, Atlas Copco GA18VSD+ screw compressor, 18.5 kW, 13 bar, 3.57 m3/min, with integrated frequency converter. Kjdsyk Rxkepfx Ab Tsln

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Technical Data – ALMiG V-DRIVE 75 (PLUS O) Screw Compressor incl. WRG Type / Model: ALMiG V-DRIVE 75 screw compressor (version PLUS O), incl. WRG (heat recovery) Supply voltage / Frequency: 400 V / 50 Hz Drive power: 75 kW Kjdpfx Abjykk Dge Tjln Max. discharge pressure: 7 bar Free air delivery: 4.0 – 14.18 m³/min Dimensions (L × W × H): 2300 × 1380 × 1950 mm Weight: 2041 kg Purchase price (2020): EUR 106,646.00 (see attached invoice) Inspection date: 20/02/2026 First come, first served. Upon request, we can dismantle the compressor and load it onto the buyer’s truck provided by the buyer.

Condition: used, This Kaeser screw compressor CSD102 is being auctioned in our RESTLOS online industrial auction 'Closure of Flat Glass Facility – Glass Processing Machines, Warehouse Equipment, Compressors and Much More' in 01471 Radeburg. Kjdeykra Aopfx Ab Tjln

Condition: excellent (used), Year of construction: 2009, operating hours: 35,712 h, functionality: fully functional, Screw compressor Atlas Copco GA45VSDFF. Integrated dryer and frequency converter. 45 kW, 13 bar, 8.60 m3/min. Kljdpsyknlnsfx Ab Ten

Condition: used, Year of construction: 2001, pressure (max.): 10 bar, Screw Compressor Manufacturer: Atlas Copco Type: GA 11 FF Year of Manufacture: 2001 Technical Specifications Manufacturer: Atlas Copco Type: GA 11 FF (with integrated refrigeration dryer) Year of Manufacture: 2001 Floor-Mounted Design Control System: Elektronikon Max. Operating Pressure: 10 bar Ksdpfxswivluo Ab Toln Motor Speed: 3000 rpm Rated Power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: new, Year of construction: 2025, C43 airend Motor power 5.5 kW Pressure 8 bar FAD 888 l/min – 53 m3/h Kjdpfx Abjvpgcle Tjln Power supply 400 V – three-phase -50 Hz Start YD Noise level 66 dB Connections 3/4″

Condition: used, Year of construction: 2002, operating hours: 36,000 h, total length: 2,350 mm, total width: 1,320 mm, Boge S 101 Screw Compressor Year of manufacture: 2002 Volume flow: 13.1 m3/min Operating pressure: 8 bar Motor speed: 3000/min Kodpfx Ajxfwrxeb Tjln Motor power: 75 + 2.2 kW Operating hours: approx. 36,000 h

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 32912, power: 22 kW (29.91 HP), operating pressure: 10 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Boge S29 compressor is an industrial equipment designed to deliver reliable performance in demanding environments. This used, lubricated model delivers a maximum pressure of 10 bar, ensuring sufficient power for numerous industrial applications. With an output of 22 kW, the Boge S29 guarantees notable energy efficiency, making it ideal for installations that require a constant and stable compressed air supply. Renowned for its robustness, this compressor is built for long service life and easy maintenance. Klodpoyg Izbofx Ab Ton This Boge S29 compressor represents a smart choice for companies seeking an economical solution without compromising on quality and performance.

Condition: excellent (used), Year of construction: 2015, operating hours: 67,772 h, functionality: fully functional, Atlas Copco GA37VSD+FF screw compressor. 37 kW with 13 bar and 6.55 m3/min. Inverter and dryer integrated. Klsdsyilkcspfx Ab Tsn

Condition: ready for operation (used), Year of construction: 2001, operating hours: 48,000 h, functionality: fully functional, pressure (max.): 12.5 bar, type of cooling: water, Equipment: type plate available, well-functioning variable speed screw compressor, water-cooled Klsdoykuqwjpfx Ab Tsn

Condition: used, Year of construction: 2005, operating hours: 52,029 h, functionality: fully functional, power: 37 kW (50.31 HP), volume flow: 375 m³/h, pressure (min.): 6 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, USED KAESER SCREW COMPRESSOR BSD72SFC + REFRIGERATION AIR DRYER TD61 Installation consists of: - 1 x Kaeser frequency-controlled screw compressor BSD72SFC Capacity: 6.25 m³/min Pressure: max. 8.5 bar Ksdpfx Asykriqjb Toln Motor power: 37 kW Total hours: 52,029 / load hours: 38,411 - 1 x Kaeser refrigeration air dryer TD61 Capacity: 7.0 m³/min Motor power: 1.1 kW - 1 x cyclone separator ZK04 with automatic condensate drain Capacity: 7.0 m³/min - 1 x fine filter FF-71 Capacity: 7.1 m³/min

Condition: excellent (used), Year of construction: 2008, operating hours: 112,351 h, functionality: fully functional, Kaeser ESD351 screw compressor, 200 kW with 8 bar and 36.80 m3/min. Air-cooled. Kjdpfx Abjyhb Iwj Tsln

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 75 Year of construction 2010 Final pressure 11 bar Motor output 75 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2300 mm Width 1400 mm Height 1860 mm Weight 1970 kg Kedpfx Abettucgs Tjln Operating hours 7637 h Load hours: 6317 h Downtime hours 167714 Total delivery volume 4506000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. Kljdpfx Abjttv Ibo Tjn The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Maintenance and service-friendly drive concept ALMiG Gear 132 Year of manufacture 2011 Final pressure 10 bar Motor power 132 kW Volume flow : 18,04 Length 2800 mm Width 1400 mm Height 2025 mm Weight 3830 kg Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2023, operating hours: 8,290 h, functionality: fully functional, overall weight: 4,250 kg, total length: 4,085 mm, total width: 1,650 mm, total height: 2,150 mm, power: 90 kW (122.37 HP), volume flow: 906 m³/h, operating pressure: 8 bar, pressure (max.): 9 bar, type of cooling: air, Equipment: type plate available, Very lightly used compressor with variable speed control and integrated dryer in excellent condition, providing oil-free compressed air at a high-quality level! An optional master control unit, Atlas Copco Optimizer 4.0, can also be purchased. This allows integration into a network (internet). (Note: The photos show the Optimizer, which is available as an option.) The ventilation system is also available for purchase. The compressor was part of a redundant compressor pair. Here is the Atlas Copco product description (full specifications are available online): The ZR and ZT compressors are used in industries that demand high-quality standards for compressed air, such as food and beverage, pharmaceuticals, automotive, medical, textile, power generation, chemical, battery manufacturing, and many others. Air-cooled, oil-free rotary screw compressor ZT 75 VSD+ – internal components. Difference between ZR and ZT: Both our ZR and ZT models produce certified oil-free air to safeguard all your critical processes and products. The difference is: the ZR is water-cooled, the ZT is air-cooled. With pressure ranges from 3.5 to 13 bar, our screw technology maximizes energy savings while ensuring optimal air quality for you. Oil-free, air-cooled premium rotary screw compressor ZT 75 VSD+ with integrated IMD dryer. All-in-one solution A compact, universal solution for high-quality compressed air. Oil-free rotary screw compressors ZR and ZT are available as a Full Feature package with the following features: - integrated dryer for a small footprint - Variable Speed Drive (VSD) to minimize energy costs Fully serviced by Atlas Copco throughout. Additional photos are available upon request. Kledoyl Iyhepfx Ab Tsn Important: The machine must be dismantled on-site by the buyer. No dismantling or shipping costs included!

Condition: excellent (used), Year of construction: 2008, operating hours: 126,772 h, functionality: fully functional, Kaeser DSDX243SFC screw compressor, 132 kW with 8.5 bar and 26.90 m³/min. Integrated frequency converter. New compressor stage installed at around 45,000 operating hours. Ksdpfoyhakkex Ab Tjln