Screw compressor 35.1 m³/min

Demag CompAir 350WS EK285NK

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Dkodpoikqz Sefx Afnjh Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 160 mm spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm turning speeds 85 - 1800 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 0,85 / 1,5 kW weight of the machine ca. 500 kg. Dsdpfofv H H Hjx Afnjkh range L-W-H 965 x 515 x 1920 mm

Year of construction: 2002, condition: excellent (used), machine/vehicle number: 020151003, FOLDING MACHINE MULTIPLI 35 WITH STAND Format (mm): max. 297 x 420 // min. 105 x 148 Pockets: 2 Folding arts: Letter fold, zigzag fold, double parallel, single fold Dkedpfx Afsiqpb Esnjh

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 50Hz / 5.5 kW / 11.5/6.6 A Dksdpjq S N Iisfx Afnsh Final pressure with open gas ballast: 0.35 mbar Final pressure with closed gas ballast: 0.25 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm Dsdpfxjufgnzo Afnokh

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Djdpjh Akm Tefx Afnokh

Condition: used, Year of construction: 2009, Compressor 2: Air compressor, make CompAir, type: DH75HSR-10W, 75 kW, bloc compressor 2S7, volume rate of flow 11,9 m³/min, 10 bar, suction pressure 1 bar, 3.700 U/min, built 2009 Dodpfxsg D Rbqo Afnskh also: Air compressor, make Bellis Morcom, type: WH50 H3N, stroke 165-1 mm, 750 rpm max, 540 kW, 45 barG, built 1999. Compressor, make SIAD, Type: WS1/085-M, with MTA Type: RFWL 200/40, with 40 bar, built 2004, for 22.500 € Compressor, make SIAD, Type: WS1/085-M, with MTA Type: RFWL 200/40, with 40 bar, built 2004, for 22.500 €

Condition: good (used), Year of construction: 1980, Diesel emergency generator MWM Mercedes - AEG built in 1980 with switch cabinet, cooler. Dkedpfxot In Nye Afnsh Diesel engine MWM 8 cylinder 405 HP Generator AEG Type:SIRI 100 D/4 330KVA .

Condition: excellent (used), The machine was built in 2007 and has only worked 5,000 hours. It was used exclusively to test casting molds, which explains the low operating hours. The machine can be inspected and tested under power in Germany – 64850 Schaafheim. For further information, please contact us. In addition to the machine, plastic granulates as well as various accessories and spare parts (see photos) are also available for purchase. ENGEL Victory 1050/220 Power, year of manufacture 2007. Location: The machine is located fully assembled in 64850 Schaafheim (Germany). Condition: The machine can be connected to power and demonstrated. Overall dimensions: Length: approx. 6,950 mm Width: approx. 1,800 mm Height: approx. 2,250 mm Weight: approx. 12,900 kg Platen and tool specifications: Clamping plates: approx. 820 × 820 mm Tie bar spacing: approx. 570 × 570 mm Minimum mold height: 250 mm Maximum mold height: 700 mm Daylight: 950 mm Dsdjxldtiopfx Afnskh Center bore: Ø 125 mm Main technical data Feature Description Manufacturer ENGEL AUSTRIA GmbH Machine type Victory 1050/220 Power Year of manufacture 2007 Machine no. 167023 Control system ENGEL CC control (touch panel, graphical user interface) Clamping force 2,200 kN (220 t) Screw diameter Suitable for HP 1 nozzle (Ø 50–120 mm) Injection pressure Up to 3,000 bar at 400 °C Injection volume (PS) Up to 1,600 cm³/s The machine can be inspected and tested at any time at our facility in Schaafheim by prior arrangement. Best regards

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Dodpfjxk U Arex Afnekh Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.