Used Gkw Compressor for sale (3,267)

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Kdjdpfx Apjzf Ivue Dsu Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Kdodpfxozz Hils Ap Dou Weight: 595 kg Year of manufacture: 2022/12

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM Kodpey Iplfefx Ap Djdu 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Kedpeyb Sdijfx Ap Djdu Good working condition

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 Ksdpfx Aexc T Evep Dedu o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Kdsdpoyl S Ebofx Ap Dju

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar YOM 1991 Good condition Kedpfx Apeyb Rqus Dsdu Dimensions (LxWxH): 4700x2200x1450 mm

Condition: used, We offer pallets of approximately 5,000 kg open-type compressors, featuring a mix of Bitzer, DWM, and Bock units. This lot has been assembled for trade, export, and stock building purposes and is sold as a single complete batch. The entire package is available for one fixed package price. No individual sales are offered. Kdodpfeycvkvex Ap Dou If you have any questions or require additional availability, please contact us.

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar 26.04 m3/min Ksdpfx Aezznqkjp Dsdu Year of manufacture: 2010 Operating hours: 64,380 h

Condition: repair required (used), Year of construction: 2018, operating hours: 34,881 h, functionality: limited functionality, power: 45 kW (61.18 HP), volume flow: 502.2 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Kdsdpfez Iz Itox Ap Dou 45 kW 8.50 bar 8.37 m3/min Year of manufacture: 2018 Operating hours: 34,881 Problem with the cooling system. The temperature is rising rapidly. The compressor is running.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 45,275 h, functionality: fully functional, power: 4.7 kW (6.39 HP), fuel type: electric, volume flow: 125 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, Equipment: documentation/manual, type plate available, For sale is a used Kaeser SK 26 screw compressor from our company’s inventory. Manufacturer: Kaeser Type: SK 26 Year of manufacture: 2001 Operating hours: approx. 46,275 h Load hours: approx. 23,142 h Available from: December 2026 Kjdpfoz R I Smox Ap Dsdu The compressor is currently in use at our facility and will be available from December 2026. The unit has been used and maintained regularly and is in used condition, commensurate with its age. The compressor is currently ready for operation. On-site inspection is possible after prior arrangement.

Condition: like new (used), Year of construction: 2025, operating hours: 778 h, functionality: fully functional, machine/vehicle number: 4152034870, overall weight: 610 kg, fuel type: electric, pressure (max.): 10 bar, noise level: 73 dB, type of cooling: air, Equipment: documentation/manual, type plate available, | Manufacturer | Schneider Druckluft GmbH | | Model | AMG 37S MEAA | Kedpfjz Tcl Eox Ap Dedu | Type | Screw compressor | | Year of manufacture | 2025 | | Product number | 4152034870 | | Motor power | 37 kW | | Power supply | 400 V / 50 Hz / 3 phases | | Operating pressure | 10 bar | | Maximum pressure | 10 bar | | Air flow rate* | 5,700 l/min or 5.70 m³/min | | Weight | 610 kg | | Dimensions (W × D × H)* | 1,330 × 830 × 1,555 mm | | Noise level | 73 dB(A) | | Air connection* | 1¼″ | | Maximum ambient temperature | 40 °C |

Condition: good (used), Year of construction: 2021, operating hours: 22,633 h, machine/vehicle number: 1220-8235345, Offer 26136 Kdedpfx Aj Aba Npep Dju Screw compressor with integrated refrigeration dryer + air receiver Technical data: - Control system: SIGMA CONTROL - Operating hours: approx. 22,633 h - Load hours: approx. 10,983 h - Operating pressure: 11 bar - Delivery rate: 3.5 m³/min - Motor speed: 2960 1/min - Drive: 400 V / 18.5 kW - Integrated refrigeration dryer - Space requirement: approx. W 800 x D 1650 x H 1550 mm - Weight: approx. 650 kg - Öewamat - Compressed air receiver, manufacturer OKS, 500 L, year of manufacture 2021 - Compressed air filter

Condition: good (used), Year of construction: 1997, For sale are 2 identical Atlas Copco screw compressors. Manufacturer: Atlas Copco Type: ZR 75 / 10 Serial Number: AIF 042705 = Compressor 1 Serial Number: AIF 053082 = Compressor 2 Operating Hours: 94620 h = Compressor 1 Operating Hours: 96461 h = Compressor 2 Voltage: 400 V Power (kW): 76 Air flow rate in m³/min: 10.4 Max. air pressure in bar: 10 Both compressors have been maintained by the manufacturer according to the maintenance schedule (reports available). After approximately 60,000 operating hours, a stage replacement was carried out on both units. Kdsdpsz Rntisfx Ap Dju The motor was also replaced on both compressors. The units are in good condition. Price: €6,900 per compressor Inspection is possible and encouraged (93499 Zandt).

Condition: excellent (used), Year of construction: 2018, PROD. ATLASCOPCO TYPE GA45 FF S/N API585058 YEAR 2018 Kjdpfx Apo Aazttj Dsdu POWER (kW) 45 CAPACITY (m3/min) 8.29 PRESSURE (bar) 7.25 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER yes, R410a 0.97kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 11/2 DOCUMENTS no

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2028752, overall weight: 155 kg, power: 4 kW (5.44 HP), pressure (max.): 10 bar, noise level: 79 dB, Equipment: refrigerant dryer, type plate available, Due to company closure, for sale! SPECIAL PRICE! Aircraft 2-piston compressor, 400V, 9.6A, including refrigerant dryer. Fully functional. Self-collection only. Kedpfx Aoz Rt Tuep Dsdu

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) Kdsdpfsz Rmvcsx Ap Dju air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,654 kg, Equipment: refrigerant dryer, type plate available, Atlas Copco air compressor, model: GA90VSDFF, oil-injected screw compressor with frequency converter (VSD), with dryer, pressure: 12.7 bar, air flow: 293.1 L/s, motor: 3508 rpm, year: 2016, weight: 1654 kg. Shipping throughout Europe not included, VAT not included. Reference: 1167 Kdodoyxpz Ujpfx Ap Dsu

Condition: used, functionality: fully functional, power: 3 kW (4.08 HP), pressure (max.): 13 bar, Schneider Air Master AM D Plus Air Dryer DK-Smart Kedpfx Apj Aaz Eio Dodu with Schneider compressed air tank Year of manufacture: 2018, fully functional Inspection possible.

Condition: used, Year of construction: 2005, A complete compressed air system is available, consisting of a screw compressor, refrigerated compressed air dryer, Kaeser FF-138D filter housing, E-F-138 filter and compressed air tank, 1) Kaeser SK 26 SIGMA screw compressor, rated power: 15kW, length: 750mm, width: 905mm, height: 1245mm, weight: 320kg, 2) Kaeser TE 121 refrigerated compressed air dryer, refrigerant: R134a, max. refrigerant operating pressure: 18bar, max. air operating pressure: 16bar, length: 1060mm, width: 1520mm, height: 1513mm, 3) Kaeser FF-138D filter housing, with E-F-138 filter, 4) OKS compressed air tank, tank capacity: 2,000l, operating pressure: 0-11bar, test pressure (PT): 16bar, operating temperature: -10 to +50°C, with CE marking CE 0044, an on-site inspection is possible. Kdsdpfo Aaln Uex Ap Dou

Condition: used, Year of construction: 1981 Operating hours: 1.692 Tank pressure: 8 bar Kedpfxoz S A Nue Ap Dodu

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Kdsdpfx Apjz Rq Euj Dsu Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: AII 477031, overall weight: 1,500 kg, total length: 2,000 mm, total width: 980 mm, total height: 2,000 mm, volume flow: 522 m³/h, pressure (max.): 10 bar, Equipment: documentation/manual, type plate available, Kdodj Aayw Rspfx Ap Dou

Condition: used, Year of construction: 1981 Ksdjz S A Rropfx Ap Djdu

Condition: excellent (used), Year of construction: 2023, operating hours: 1,087 h, functionality: fully functional, machine/vehicle number: API474668, power: 26 kW (35.35 HP), Atlas Copco GA 26 VSD FF Rotary Screw Compressor Year 2023 For sale is a highly efficient variable speed driven premium screw compressor of the latest generation: Atlas Copco GA 26 VSDs FF with integrated refrigerant dryer (Full Feature). The machine was manufactured in 2023 and has an extremely low operating history of just 1087 running hours. Technically the compressor is in absolute 1A top condition and ready for immediate operation. Thanks to the state of the art VSDs variable speed technology the unit adapts flexibly and precisely to your actual compressed air demand. This ensures maximum energy efficiency and drastically reduces operating costs. With the integrated Full Feature equipment including a built in refrigerant dryer the system delivers dry and clean compressed air directly requiring a minimal footprint. Condition of the machine: Kedpfxsz Sqa Ue Ap Djdu Technical: 1A Top Condition. Runs perfectly, reliably, and without any maintenance backlog. Optical: The housing shows some cosmetic dents and scratches (see photos). These are purely transport related cosmetic imperfections. The flawless function, safety, and lifespan of the unit are in no way affected. Technical Data: Manufacturer: Atlas Copco Model: GA 26 VSDs FF with integrated refrigerant dryer Serial Number: API474688 Year of Manufacture: 2023 Operating Hours: 1087 h Motor Power: 26 kW (35 hp) Motor Speed: 5050 rpm Maximum Working Pressure: 10.25 bar Free Air Delivery at maximum pressure: 5.8 m3/min (96.5 l/s) Regulating Range Free Air Delivery: continuously variable from 0.95 to 5.88 m3/min Noise Level: 66 dB(A) Dimensions: Length 1330 mm, Width 870 mm, Height 1725 mm Weight: 604 kg Electrical Connection: 400 V, 50 Hz, 3 Phases Country of Origin: Belgium