Used Kaltenbach Saws for sale (109)

Condition: good (used), MITRE COLD CIRCULAR SAW MACHINE Type: KKS 400 H Year of manufacture: 1982 Equipment: Codpfjxnmn Usx Agcjaa - Infeed roller conveyor 1000 mm, left - Outfeed roller conveyor with length stop, 2000 mm, right - Saw blade diameter: 370 mm - Hydraulic clamping cylinder with 8 mm stroke, handwheel for pre-setting - Documentation Condition: good, workshop inspected

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Cajdpox Anl Defx Agcja Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Required space: 1200 x 1100 x 1620 mm

Condition: used, 1 used cold sawing machine KALTENBACH KKS 400 Technical data: Csdpfx Asq Ukvxogcoaa Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting area flat: 315x40 mm Cutting area square: 120x120 mm Total power requirement: 1.5 kW Space requirement approx.: 1200 x x1000 x 1700 mm Machine weight approx.: 1250 kg Manufacturer's description; The powerful drive provides the prerequisite for high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and flank-ground. The entire gearbox runs in an oil bath; all bearing points have roller bearings. Various speeds can be achieved by means of gear wheels, the cutting speeds of which are switched electrically by pole-changing motors. The tried and tested saw blade guide in a strong pivot bearing is subject to practically no wear. It is rigid and allows work within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to Skla.

Condition: used, Manufacturer: Kaltenbach Type: KKS Saw blade diameter 370 mm Cutting capacity 45° - 90° round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Speed: 14, 19, and 28 rpm Dimensions: 1100 x 1050 x 1600 mm (LxWxH) Weight: approx. 850 kg Caodpjwpb E Hefx Agcja Equipment: • Semi-automatic operation • Hydro-pneumatic stepless saw blade feed • Mitre cuts on both sides R - L • 0° longitudinal cut possible • Coolant system • 1 saw blade The machine can gladly be demonstrated under power on site. All information without guarantee. Errors and interim sale excepted.

Condition: refurbished (used), Year of construction: 1980, For sale: Kaltenbach cold circular saw – Various versions and models in stock. The machine has been extensively overhauled both technically and visually. Gearbox, of course, backlash-free! Type: KKS 400 H Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid approach/return: 1,550 mm/min Maximum working range: 130 mm Square material working range: 120 mm Caedexwnz Ispfx Agcoa Flat material working range: 305 x 20 mm Round material working range: 130 mm Minimum working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection/collection in 89558 Böhmenkirch. Shipping available on request. Forklift available for loading.

Condition: used, Kaltenbach KKS 400 Technical Specifications Saw blade diameter: 370 mm Cutting diameter: 115 mm Stroke: - mm Cutting area at 90 degrees, flat: 300 x 35 mm Cutting speed: 11 / 15 / 22 m/min Total power requirement: 1.4 kW Casdpfx Agoxhdvvscja Machine weight approx.: 850 kg Space requirement approx.: 1100 x 1100 x 1600 mm

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system Cjdpewtdi Aefx Agcoaa - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Condition: used, Year of construction: 1988, Saw blade diameter: 400 mm Cutting range round: 130 mm Rectangular: 305 x 40 mm Miter cut at 45° round: 130 mm Codpjw Tk Ecsfx Agcjaa Rectangular: 40 mm Cutting speed: 10 m/min Hydraulically infinitely variable feed speed: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller table: 1100 x 1000 x 1900 mm

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1500 01025, saw blade diameter: 400 mm, total height: 1,700 mm, total width: 1,100 mm, overall weight: 700 kg, type of input current: three-phase, cutting diameter: 130 mm, space requirement height: 2,000 mm, space requirement length: 900 mm, space requirement width: 1,200 mm, length stop: 6,000 mm, Kaltenbach KKS400E cold circular saw, year of manufacture approx. 1980–1982, fully functional, can be inspected under power. Incl. outfeed roller conveyor with 6000 mm length measuring device. Cutting range at 90°: D130 or 120x120 mm, flat material 315x40 mm. Cjdpfxewx Nn Ie Agcjaa

Condition: excellent (used), Year of construction: 2021, saw blade diameter: 400 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 76 rpm, Equipment: rotational speed infinitely variable, Kaltenbach KKS 401 NA 2000 Retrofit Model: KKS 401 NA Year of overhaul: 2021 Complete retrofit and overhaul in 2021, including all-new electrics, controls, and drives. Saw motor: 5.5 kW, frequency controlled Saw blade speed: 20–76 rpm Blade cutting speed (400mm): 25–96 m/min Working range, round material: 135 mm Working range, square material max.: 130 x 130 mm Working range, rectangular material max.: 230 x 80 mm Kaltenbach KKS 401 mit NC-controlled mitre adjustment Kaltenbach RKS 451 / KKS 401 feed extension, 2000 mm Extended feed length for efficient processing of particularly long sections. Flat magazine for 6m steel materials, 6 x 2m - For preloading of round, square, and profile material - System designed for materials up to 200 mm width (slot width adjustable) - Material supplied via chain conveyor with loadable compartments - Material separation by compartment - Fully automatic loading process controlled via Siemens PLC on the saw - Material adjustment at the magazine is manual - Magazine payload max. 2.0 tons - Material loading possible from front side - Protective enclosure with light barrier - Total length approx. 7.5 m - Total width approx. 2.5 m Codpfjxmv Rcox Agcoaa Kaltenbach RKS 451 / KKS 401 chip conveyor Minimum quantity lubrication by Menzel with recirculating cooling system including integrated pump - Switchable in machine settings between minimum quantity and recirculating lubrication Remote maintenance module, interface for remote machine access and update capability via remote maintenance by Lupberger Systemlösungen OHG Preparation for offload system installation - Hardware preparation for future installation of an offload system Saw cycle control - User operates the control in cycle mode - Data entry in surface structure required for the entire bar - Fetch material (with cut-off flap or magazine option) - Relative positioning - Absolute positioning - Absolute cutting with mitre selection (with NC-controlled mitre and pusher feed option) - Relative cutting with mitre selection (with NC-controlled mitre option) - Wiper function (with wiper arm and material disposal unit option) - Material eject front - Material eject via flap (with pusher feed and flap) - Repetitions - Program end Fully operational, in very good overall condition. Price: Negotiable plus VAT. (no warranty)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, For sale is a Kaltenbach cold circular saw. The gearbox is backlash-free! Model: KKS 450 E Saw blade diameter: 450 mm Codpjxt Uk Uofx Agcoaa Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid forward/reverse: 1,550 mm/min Max. working range: 150 mm Working range, square material: 140 mm Working range, flat material: 305 x 20 mm Working range, round material: 130 mm Min. working range: 10 x 10 mm Miter range: 0° - 90° - 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 1,200 kg Inspection/collection in 89558 Böhmenkirch Shipping available on request Forklift for loading available.

Condition: good (used), Year of construction: 1991, functionality: fully functional, overall weight: 1,350 kg, Kaltenbach KKS 401 Fully functional Condition very good. Cedpfx Ageui R Dpjcoaa

Condition: good (used), Year of construction: 1968, Saw blade diameter 370 mm Cutting capacity 45° - 90 round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Cutting speed 30, 60, 130 and 260 m/min Motor power approx. 2.6 kW Dimensions L x W x H 1100 x 1050 x 1600 mm Weight 850 kg Accessories / Special features: Csdperwyfqofx Agceaa - Semi-automatic operation - After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released again. - Hydro-pneumatic stepless saw blade feed - Mitre cut on both sides R - L - 0° longitudinal cut possible - Coolant system - 1 saw blade Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 1974, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm cutting area at 90° square: 200 x 80 mm cutting area in mitre at 45° square: 150 x 70 mm cutting speed: 13, 17, 26 m/min Csdjtp Hgtspfx Agcsaa engine: 380 V, 1,7/2,2/2,6 kW space needed: 1050 x 1000 x 1680 mm weight: ca. 850 kg

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Cajdpfx Agjqxamgocsa Machine in good condition, operating instructions available.

Condition: excellent (used), KKS 450 Semi-automatic, hydraulic universal circular sawing machine with rotary table for miter cuts SAW BLADE Segment saw blade ☐ 400 x 4 ☒ 450 x4 mm Saw blade holder according to DIN 8576 50/4x14/80 mm WORKING RANGE Round material 90/45° 125 150 mm Square material 90° 115 140 mm 45° 110 130 mm Flat material 90° 305 x 40 330 x 40 mm 45° 235 x 30 250 x 40 mm U-profiles upright 90/45° 120 x 55 140 x 60 mm Codpfx Agjub Dc Iscjaa horizontal 90° 240 x 85 280 x 95 mm 45° 180 x 70 220 x 80 mm Section lengths from 10 mm DRIVE POWER Saw motor 1.8/2.7 kW Hydraulics 1.5 kW Coolant pump 0.1 KW CUTTING SPEED SPEEDS (standard) 11.5/23 13/26 m/min or 10/20 11/22 m/min or 13/26 15/30 m/min SAW BLADE FEED according to table infinitely variable 0 - 1,000 mm/min Rapid return saw blade 3,300 mm/min ELECTRICAL CONNECTION TN-S system - 3 phases, neutral conductor, earth 400/50 V/Hz WEIGHT Machine without accessories approx. 1,050 kg

Condition: refurbished (used), Year of construction: 1991, For sale is a Kaltenbach cold circular saw. The machine has been completely disassembled and rebuilt. As part of the overhaul, the gearbox, motor, and hydraulics were reconditioned. The table has been planed and fitted with new bearings. Casdpfx Agjxq S Ilscoa Gearbox backlash-free! Type: KKS 400 E Year: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 – 1,000 mm/min Rapid advance/return: 1,550 mm/min Max. working area: 130 mm Working area for square material: 120 mm Working area for flat material: 305 x 20 mm Working area for round material: 130 mm Min. working area: 10 x 10 mm Mitre range: 0° – 90° – 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Böhmenkirch Shipping available on request Forklift available for loading.

Year of construction: 1970, condition: used, Metal circular saw KKS 350 Blade diameter 350 mm Cedpjhrzahofx Agcsaa

Condition: good (used), Semi-automatic cold circular sawing machine with roller table. Cjdpfx Asq U N Ryjgcoaa

Condition: used, Year of construction: 1990, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 5 mm, cutting range round steel at 45°: 160 mm, feed rate Z-axis: 10 m/min, total length: 1,170 mm, total height: 1,960 mm, total width: 1,070 mm, overall weight: 1,350 kg, Equipment: rotational speed infinitely variable, Kaltenbach KKS 401 cold circular saw with 7 meter roller conveyor and automatic feed Tiger Stop 5.3 Complete with all operating instructions for sawing with steel and aluminum! Csdpfx Agewmm D Aecoaa

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 304289, saw blade diameter: 450 mm, cutting speed: 1,000 mm/min, cutting width (max.): 5 mm, opening stroke: 160 mm, TECHNICAL DETAILS Saw Blade Saw blade diameter standard: 450 mm Saw blade diameter min.: 370 mm Cutting width: max. 5 mm Saw blade mounting – Bore: 50 mm Saw blade mounting – Number of driving pins: 4 pcs Saw blade mounting – PCD of driving pins: 80 mm Saw blade mounting – Diameter of driving pins: 13 mm Saw blade feed speed: 0–1,000 mm/min Vertical Clamping Unit Opening stroke with aluminum pressure pad (mitre cuts): max. 160 mm Opening stroke with steel pressure pad (straight cuts): max. 160 mm Rotary Table Rotary table adjustment: stepless ±60° Csdpfxew H Ivas Agceaa Cutting Speed with 450 mm Blade Diameter Two-stage with chain: 11/22 m/min, 13/26 m/min, 15/30 m/min Two-stage with toothed belt: 35/70 m/min Frequency-controlled with toothed belt: stepless from 7 to 43 m/min, stepless from 15 to 75 m/min Automatic Feed Unit Programmable length: max. 9,999 mm Material width: max. 240 mm Remnant length with single-sided swiveling blade (0/60 degrees): min. 78 mm Remnant length with clamping gripper: min. 98 mm Remnant length with double-sided swiveling blade (-60/+60 degrees): min. 265 mm Remnant length with double-sided swiveling blade and clamping gripper: min. 285 mm Clamping force max.: 3,900 N Clamping force min.: 800 N Traverse speed: max. 30 m/min MACHINE DETAILS Electrical Connection Operating voltage: 400 V, 50 Hz (3-phase) Control voltage DC: 24 V Solenoid voltage DC: 24 V Two-stage with chain: 1.8/2.7 kW Two-stage with toothed belt: 3.7/4.7 kW Frequency-controlled with toothed belt: 4.0 kW, 5.5 kW EQUIPMENT HSS solid steel blade HSS segmental saw blade Automatic feed unit

Condition: good (used), Year of construction: 1997, functionality: fully functional, For sale is a Kaltenbach cold circular saw. Gearbox is free of play! Type: KKS 450 E Year of manufacture: 1997 The saw is equipped with a coolant pump and a minimum quantity lubrication system, both of which can be switched on as needed. Saw blade Ø: 450 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20, 13/26, 15/30 m/min Feed rate: 0 – 1,000 mm/min Rapid forward/reverse: 1,550 mm/min Max. working area: 150 mm Working area for square material: 140 mm Working area for flat material: 330 x 40 mm Working area for round material: 140 mm Min. working area: 10 x 10 mm Mitre range: 0° – 90° – 0° Dimensions (LxWxH): 1,080 x 900 x 1,760 mm Weight: 1,000 kg Inspection / collection in 89558 Böhmenkirch Shipping available upon request Forklift available for loading. Casdpfx Agexmtivocsa

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Caodpfx Ajxb Aqxsgcja Forklift available for loading.

Condition: refurbished (used), Year of construction: 1980, For sale is a Kaltenbach cold circular saw The machine has been technically and optically refurbished Gearbox naturally free of play! Caedpjxb Aqfjfx Agcea Type: KKS 400 H Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 850 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Csdpfxew Ebque Agcoaa Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.