Used Cold saws - half-automatic - saw blade diameter 351-420mm for sale (51)

Condition: good (used), Year of construction: 2005, Functionality: fully functional, TRENNJAEGER TUS 470 with ball screw and heavy-duty spur gear for burr-free cold sawing of profile, panel, square, and round material in straight and miter cuts, Kwolsv Ryaaehcdwujw pivotable on both sides from 90 degrees to 45 degrees to 30 degrees, with digital angle display (built in 2005) - Cutting range with saw blade ᴓ 450 mm: 90°, 45° right/left, 30° right/left - Round 140 mm 140 mm 130 mm - Square 110 x 110 mm 110 x 110 mm 110 x 110 mm - Rectangular 290 x 40 mm 190 x 40 mm 130 x 40 mm - Rectangular Profiles 290 x 70 mm 190 x 70 mm 130 x 70 mm This increases by approximately 10 mm for a saw blade ᴓ 470 mm - Maximum clamping range of the machine: 290 x 150 mm - Working height: 900 mm Machine is supplied without infeed and outfeed

Condition: used, Year of construction: 1991, saw blade diameter 425 mm Kolhcsvmtdkjdwueww cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture) Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Behringer Eisele VMS 370 PV Metal Circular Saw Manufacturer: Behringer Eisele Type: VMS 370 PV Year of manufacture: 2008 Condition: used, very good Machining cross section max. round at 90° 130 mm rectangular at 90° 200 x 100 mm round at 45° 130 mm rectangle at 45° 140 x 100 mm Saw blade diameter 370 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 34 / 68 rpm Machine head swivels 45-90-45-30° Koljv Imxkehcdwujww Total motor power 2.0/2.6 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm Minimum quantity lubrication Scope of delivery: - 1x saw blade - Instruction manual

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 Kjlhotqqrzocdwusww total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: used, Year of construction: 2004, saw blade diameter 370 mm Kwjljv H Sfgohcdwuow cutting diameter 120 mm stroke 370 x 32 x 3 mm total power requirement 5,5 kW

Condition: good (used), Year of construction: 2011, machine/vehicle number: 691-PW3R-05519, Offer 24573 Technical specifications: - Cutting wheel diameter up to 356 mm - Cutting capacity up to 120 mm - Motorized cutting infeed - Manual cross infeed 120 mm - Table dimensions 410 x 310 mm - Table travel 220 mm - Drive 400 V / 5.5 kW - Coolant system - Space requirement approx. W 1500 x H 1800 x D 1050 mm Kjlhcdev Saqbewuoww - Weight approx. 850 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 304289, Saw blade diameter: standard 450 mm, minimum 370 mm Kolsv Sbtdehcdwujww Saw blade type: HSS solid steel blade, 7-segment saw blade Rotary table adjustment +/- 60° with feed

Year of construction: 1970, Condition: used, Metal circular saw KKS 350 Blade diameter 350 mm Kwslhshrzahecdwuew

Condition: good (used), Year of construction: 1997, Functionality: fully functional, For sale is a Kaltenbach cold circular saw. Gearbox free of play! Type: KKS 450 E Saw blade Ø: 450 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 150 mm Working range square material: 140 mm Working range flat material: 330x40 mm Working range round material: 140 mm Working range min.: 10 x 10 mm 150 Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 1000 kg Koljv Iax Rjhcdwusww Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: used, Functionality: fully functional, saw blade diameter: 400 mm, Brand: Kaltenbach Kolhcdov Eu Rpswujww Type: KKS 400M Max. saw blade diameter: Ø400 mm Used Kaltenbach circular saw in working condition.

Condition: like new (used), Year of construction: 2000, Sawing down at 45° with jaw adjustment. Hydraulic control for lowering the saw frame. Electronic, continuously variable blade speed. Hydro-mechanical blade tensioning device. Blade breakage stop. Coolant system. Feed roller conveyor 1200 mm. Kelhcdwstrm Rheueww Cutting height adjustment. Linear guide system for the saw frame. Hydraulic cutting pressure monitoring. Adjustable, mechanical length stop.

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N Kjlhoquuufocdwuoww

Condition: excellent (used), Year of construction: 1993, saw blade diameter: 400 mm, Automatic cold circular sawing machine Fab. Kaltenbach Typ. KKS 400 EC NA year 1993 Technical data Make: Kaltenbach Type: KKS 400 NA EC Year of manufacture: 1993 Saw blade Ø: 400 mm Motor power: 1,8/2,7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid feed/return: 1,550 mm/min Working area square material: 120 x 120 mm Working area flat material: 305 x 20 mm Working area round material: 130 mm Working area min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 3,500 x 1200 x 1800 mm Weight: approx. 300 kg Equipment - 400mm saw blade - Infeed and outfeed roller conveyor incl. manual stop - Vertical vice in long-stroke design - 135 mm stroke - Rotatable saw table for straight and angled cuts 180° swivel range - Automatic material feed - Workpiece fence with stable contact surfaces on both sides of the saw blade - Hydraulic saw blade feed, infinitely adjustable according to table - Work area lighting - Roller-mounted chip drawer, removable - Machine guard, Kwslhcdwsri R Nyeuew - Machine CE conform All specifications without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Kslsd Tp Nlehcdwujww

Condition: refurbished (used), Year of construction: 1988, For sale is a Kaltenbach cold circular saw. The machine has been completely dismantled and rebuilt. Kjlev Iaxqehcdwusww In the course of the overhaul, the gearbox, motor and hydraulics were overhauled. The table has been turned flat and re-stored. Gearbox free of play! Type: KKS 400 E Saw blade Ø: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Fast forward/reverse: 1,550 mm/min Max. working range: 130 mm Working range square material: 120 mm Working range flat material: 305 x 20 mm Working range round material: 130 mm Working range min.: 10 x 10 mm Mitre range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Kwoleqxamgjhcdwuew Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Machine in good condition, operating instructions available.

Condition: good (used), Year of construction: 1968, Saw blade diameter 370 mm Cutting capacity 45° - 90 round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Cutting speed 30, 60, 130 and 260 m/min Motor power approx. 2.6 kW Dimensions L x W x H 1100 x 1050 x 1600 mm Weight 850 kg Kwolhcerwyfqedwuew Accessories / Special features: - Semi-automatic operation - After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released again. - Hydro-pneumatic stepless saw blade feed - Mitre cut on both sides R - L - 0° longitudinal cut possible - Coolant system - 1 saw blade Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1974, Functionality: fully functional, machine/vehicle number: 31535, saw blade diameter: 350 mm, cutting capacity: 350 mm, Equipment: rotational speed infinitely variable, a good Kaltenbach saw with length stop of 3000 mm mounted on a frame. Kwslhevx Ahijcdwusw

Condition: excellent (used), Year of construction: 2002, saw blade diameter: 400 mm, Semi-automatic cold circular sawing machine Manufacturer Kaltenbach Type. KKS 400E Year of manufacture 2002 Technical data: Make: Kaltenbach Type: KKS 400 E Year of manufacture: 2002 Saw blade Ø: 400 mm Gearbox with speeds of 14/28 m/min -Cutting range at 90 degrees flat 120×120 mm -Cutting range at 45 degrees flat 305×40 mm -Cutting range for round material 130 mm -Cutting speed: 14/28 m/min Total power requirement: 3.5 kW Machine dimensions L 2.80 x W 1.1 x H 2.0 m (including stop) Weight 1250 kg + roller conveyors Equipment - Hydraulic retraction arms left + right - Minimal lubrication - Feed - roller conveyor 2 x 2000 mm - CNC stop L40, L = 2,300 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall. Kwjlsvmp Dyshcdwujw

Year of construction: 1985, Condition: good (used), Eisele VMS-II-S-PV metal circular saw Type No. 421 Maschnr. 01224 380V Kolhcdod Hbnfjwusww Built in 1985 50 Hz

Condition: good (used), Year of construction: 2006, Functionality: fully functional, A Kaltenbach cold circular saw is for sale. Gearbox free of play! Type: KKS 450 E Year of manufacture 2000 Kwjlhcjv D E Ngedwusw Saw blade Ø: 450 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed: 0 - 1,000 mm/min Rapid forward/reverse: 1,550 mm/min Max. working range: 150 mm Working range for square material: 140 mm Working range for flat material: 330x40 mm Working range for round material: 140 mm Min. working range: 10 x 10 mm 150 Miter range: 0° - 90° - 0° Dimensions LxWxH: 1,080 x 900 x 1,760 mm Weight: 1,000 kg Viewing / collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure Kwelhcdormkl Aewuew - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: good (used), Year of construction: 1973, Saw blade diameter 370 mm Cutting capacity 45° - 90 round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Cutting speeds 11 - 15 - 22 m/min Motor power 0.9 - 1.2 - 1.4 kW Dimensions L x W x H 1100 x 1050 x 1600 mm Weight 850 kg Accessories / Special features: - Semi-automatic operation - After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released again. - Fully hydraulic stepless saw blade feed - 3-way pole-changing saw motor - Mitre cut R - L on both sides - 0° longitudinal cut possible - Coolant system - 1 saw blade Kjlhcsrwyfbsdwuoww Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2002, For sale is a Kaltenbach roller conveyor with length stop and measuring scale. Can be used on both a Kaltenbach KKS 400 and a KKS 450. Length 2 meters (4 meters possible on request) The roller conveyor has been extensively refurbished. Kjlhcevzl Nbsdwueww Viewing/collection in 89558 Boehmenkirch Shipping possible on request Forklift available for loading.

Condition: used, Year of construction: 1972, 1 used, well-preserved hydro-pneumatic semi-automatic cold circular sawing machine for cutting aluminum, non-ferrous metals, wood and plastic Technical data: max. saw blade diameter 370 mm Cutting diameter 120 mm Kwjlobwl Emjhcdwuew Cutting range at 90 degrees: flat 260 x 60 mm Cutting range at 90 degrees: square 105 mm Cutting range at 45 degrees: flat 200 x 45 mm Cutting range at 45 degrees: square 90 mm 0° cut - longitudinal cut: yes 2 speeds 1500 / 3000 m/min Drive cable 1.7 / 2.6 kW Machine dimensions L x W x H 1000 x 1000 x 1700 mm Machine weight 700 kg Accessories / Special features: - Semi-automatic operation: After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released. - Stepless feed - Pole-changing motor - 1 saw blade - Mitre cut on both sides - Longitudinal cut 0° - Spray lever device Special accessories: - 1 roller table right with heavy stop 3500 mm and scale - 1 roller table left, approx. 3500 mm Special accessory price: € 1,500.00 plus VAT. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel