Used horizontal band saws - manual - cutting range 221-299mm for sale (75)

Condition: good (used), Year of construction: 1997, Used bandsaw by MEP Model: Shark 260 Capacity: 260 x 210 mm Includes 2 feeders Cedpsy A Eccsfx Anwogt

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, Cgsdshpktvspfx Anwjt - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2026, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Cgedpfoxdbzbox Anwot Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: new, Year of construction: 2025, – 2 speeds Cgedpfx Aoyhh Tajnwet – Double mitre cut – Hydraulically adjustable sawing pressure – Quick-clamping device – Cooling – Automatic shut-off – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 2007, Used semi-automatic band saw MACC special 650di Cutting angle from -60° to +60° Blade dimensions: 5270 x 34 x 1.1 mm Digital angle display Cutting capacity at 0° - round 460mm - square 450x450mm - rectangle 620x450mm Machine weight: 1250kg Cgodpfx Anjyzadlowjt The machine is fully serviced.

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Cgsdsy En E Sjpfx Anwst Weight 151/202 kg MANUAL IN ENGLISH

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. Cjdsi D Di Sspfx Anwjgt At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, tilt adjustment saw blade: 45 °, cutting speed: 100 mm/min, section length (min.): 15 mm, workpiece diameter (max.): 280 mm, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Maximum workpiece dimensions at 90° miter angle: Round: 280 mm Square: 280 x 280 mm and 360 x 180 mm Maximum workpiece dimensions at 45° miter angle: Cgodpfjyr N Nqsx Anwst Round: 180 mm Square: 180 x 180 mm and 260 x 180 mm Minimum sawable diameter: 6 mm Minimum sawable length at 90° cut: 15 mm Cutting speed: 19 - 100 mm/min (continuously adjustable) Saw band dimensions: 3,830 x 25 x 0.9 mm MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 10 A Connected load: 2 kW Dimensions & weight Dimensions (L x W x H): 2,400 x 1,800 x 1,500 mm Machine weight: 500 kg External reference: Lot 79

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, saw band length: 2,700 mm, saw band width: 27 mm, Features: - solid saw frame made of cast steel - miter cuts 0° - 60° right and 0° - 45° left - hard metal saw blade guides - manual vice with quick-release lever - movable vice - mechanical blade tension with electrical blade monitoring - ergonomically arranged controls Technical data: Motor power 1.3 kW Belt speed 35/70 m/min. Vice clamping width 275 mm Belt dimensions 2700x27x0.9 mm Electric coolant pump 0.06 kW Working height 990 mm Machine weight 424 kg Machine dimensions WxDxH 0.9x1.45x1.6 m Cutting range: Round Square Rectangle 90° 240 mm 240x240 mm 310x200 mm Cgjdpfx Anevpuqkjwet 45° R 175 mm 170x170 mm 240x155 mm 60° R 110 mm 105x105 mm 140x100 mm 45° L 150 mm 135x135 mm 145x125 mm

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total height: 27 mm, coolant pump power: 80 W, saw band length: 3,420 mm, saw band width: 9 mm, Semi-automatic metal band saw (fully hydraulic) for miter cuts from 0° to 60° right and 0° to 45° left -3-part saw frame: 1. Die-cast aluminum on the front to reduce weight and vibration dampening 2. Traverse made of rectangular steel tube 120x100x4 mm 3. Cast steel on the motor side to reduce vibration -solid substructure with integrated 40 l coolant tank -Hydraulic lowering of the saw frame, continuously adjustable via a flow regulator -Automatic raising of the saw frame after the end of the cut; the lifting is automatic up to the last starting position, which saves time due to unnecessary "air sawing" -solid, hydraulic vice, can be moved on linear guides -mechanical saw blade tension with electrical blade monitoring -gear reduction gear with slanted, hardened and ground teeth Cjdpfx Anjvph Hfjwogt -drive roller fastening using an adjusting nut -infinitely variable blade speed from 16 - 100 m/min -hard metal blade guides -solid rotary table with cutting channel to prevent damage to the table. -engraved degree scale -mechanical miter stops at 0°, 45° and 65° -chip removal brush integrated in the saw blade guard -electric coolant pump and coolant shut-off valves on each blade guide block -ergonomically arranged control panel -24 volt control

Condition: new, Year of construction: 2024, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements Cgedpfx Aeftmxvjnwjt * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: new, manual bandsaw / self-lowering with double-sided mitre Cutting capacity 90° round 230 mm / flat 275 x 230 mm / square 230 mm 45° right round 195 mm / flat 190 x 190 mm / square 190 mm 45° left round 170 mm / flat 185 x 150 mm / square 150 mm 60° right round 120 mm / flat 120 x 85 mm / square 85 mm Material support height 760 mm Saw blade size 2720x27x0.9 mm Cutting speed 40/80 m/min. Drive power 1.1/1.5 kW//400V//50 Hz Smallest diameter 5 mm Dimensions (L x W x H): 1600 x 1150 x 1477 mm Cgedpfx Aedx Nf Honwet Weight 370 kg - Installation of a minimum quantity lubrication system possible at extra cost. - Suitable roller conveyor and material stops available.

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for 90° cuts as well as mitre cuts, infinitely adjustable—left up to 45° and right up to 30°. (Swivel range: left 45° and right 60°) Standard features: - Large, rotatable support table with zero wear! (The saw band’s cutting channel rotates with the mitre) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tube) - Lowering of the saw arm via a hydraulic cylinder; infinitely adjustable - Easy, manual movement of the vice left/right - Electric band tension monitoring with saw blade breakage detection - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw band M42 - Chip brush Technical Data ● Cutting capacity: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° right round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° left round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° right round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW / 400V / 50 Hz ● Total connected load: 3.35 kVA ● Band speed: 20–120 m/min, stepless ● Saw band dimensions: 2910 x 27 x 0.9 mm ● Remnant piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm Codpfxsctgkzj Anwegt ● Weight: 410 kg Price on request!

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mm Cjdpfxsxaarks Anwogt Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - coolant system - operating instructions in German

Condition: new, Year of construction: 2025, cutting diameter 280 mm saw band length 3660 x 27 mm cutting width 0,9 mm capacity 90 degrees: square 270 x 270 mm capacity 90 degrees: flat 210 x 330 mm total power requirement 1,5 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1350 x 2250 x 1860 mm The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for consistently accurate cutting. Cgodpfxsyk Ii Hj Anwot

Condition: used, Working mode: semiautomatic Machine type: Horizontal bandsaw Cut: Mitre cut Mitre cuts range: -60° – 60° Drive: 4 kW, 3×400 V/50 Hz Saw band speed: 20 – 120 m/min. Saw band dimensions: 6 100×41×1,3 mm Material loading height: 770 mm Codpfxoydp Ude Anwegt Shortest remnant length: 40 mm Smallest sawing diameter: Ø 5 mm

Condition: new, input voltage: 400 V, cutting height (max.): 225 mm, pivoting range: 60 °, Equipment: CE marking, documentation/manual, - 2 speeds Cedpfxjyhibre Anwsgt - Mitre cut - Hydraulically adjustable cutting pressure - Quick-release vice - Cooling - Automatic shutdown - Saw blade 2480 × 27 × 0.9 mm - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 2000, gebraucht 2000 6253 prompt, Zwischenverkauf v China 1900 € 1 Schwenkrahmen 2480 x 0,9 x 27 mm 45 / 90 m/min 225 mm 180 x 245 mm rund 100 mm, 100 x 100 mm rund 160 mm, 160 x 160 mm 935 mm 1.1 kW 1500 mm 700 mm 1400 mm 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration Cgedpeynmy Ejfx Anwet OPTIONS: Further roller tables and band saw blades on request

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 10370 € 199.1 € Schwenkrahmen 3120 mm 35/70 m/min 280 mm 240 mm 350x140 mm rund 230 mm, quadrat 200 rund 150 mm, quadrat 130 rund 200 mm, quadrat 170 830 mm 1550 mm 1400 mm 1750 mm 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper Cgodoynmq Dspfx Anwot 2 speeds coolant equipment digital readout for mitre cuts

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 11070 € 212.54 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 280 mm 240 mm 420x200 mm rund 260 mm, quadrat 240 rund 170 mm, quadrat 160 rund 200 mm, quadrat 180 830 mm 1600 mm 1400 mm 1800 mm Cgodoynmqwepfx Anwet 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: excellent (used), Year of construction: 1999, Cutting diameter round: 200 mm Cgodpfx Aeyvtcwenwet Saw band length: 2,830 mm Cutting angle adjustment: 45° right/left

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Cedpsyuyb Nsfx Anwegt Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: good (used), Year of construction: 2006, Used band saw by Huvema Cjdpfxsyfmlis Anwogt Model: HU 230 DG Capacity: 320 x 230 mm Double mitre Self-lowering Year of manufacture: 2006

Condition: new, Technical Data: Cutting range: Round 0°: 255 mm Square 0°: 200 x 200 mm Flat 0°: 320 x 200 mm Round 45°: 195 mm Square 45°: 195 x 195 mm Flat 45°: 195 mm Round 60°: 125 mm Square 60°: 125 x 125 mm Flat 60°: 130 x 120 mm Round -45°: 200 mm Square -45°: 170 x 170 mm Flat -45°: 200 x 170 mm Cutting speeds: 35 / 70 m/min Saw blade: 2750 x 27 x 0.9 mm Working height approx.: 930 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 400 V Dimensions LxWxH approx.: 2000 x 1250 x 1900 mm Weight approx.: 350 kg Features: - Double mitre saw with a pivoting saw bow from left -45° to right +60° - Ideal for cutting pipes, profiles, as well as solid VA, steel, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration operation - Two saw band speeds for optimum adaptation to the workpiece - Hydraulic downfeed cylinder - Quick-release vice for simple and fast workpiece clamping Cgedpfjd R Sipsx Anwet - Precise, adjustable saw band guides for optimal cutting results - CE/IEC, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Vice with quick-release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic shut-off - Stand/base

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery Codpfxjd Du T Ie Anwegt • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off