Used Mep Italien for sale (131)

Condition: like new (used), Overall length: 1500 mm Width: 500 mm Adjustable height with adjustable feet: +/- 900 mm Lodpfsfn Thhsx Afuori 6 rolls, diameter: 60 mm Roll width: 430 mm

Condition: new, Length: 1500 mm 6 rollers made of tubular steel, width: 185 mm Lrsdpfx Afofxu Tkjusi Diameter: 20mm Height continuously adjustable: 650 - 1030 mm Space requirement: 1500 x 250 x 650/1030 mm

Condition: used, Year of construction: 2003, saw blade diameter 300x32x2,5 mm capacity 90 degrees: round 10-90 mm capacity 90 degrees: flat 80x10-80 mm capacity 90 degrees: square 10-80 mm Cutting range at 90 degrees: round - solid materia 10 - 40 mm Cutting range at 90 degrees: flat - solid material 40x10-40 mm Cutting range at 90 degrees: square -solid materil 10- 40 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg dimensions of the machine ca. 2590x1910x1910 mm Lrsdpjyv Nvtsfx Afuji Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm

Condition: like new (used), Year of construction: 2017, Used automatic band saw MEP Shark 332 nc 5.0 Ledpfx Afoxz Ulboueri Blade dimensions: 3320x27x0.9mm Cutting angle: from -45° to +60° Blade speed: from 15 to 100m/min Cutting capacity at 0°: - round 300mm - square 260mm - rectangular 330x260mm Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Year of manufacture: 2017 Machine weight: 1150kg The machine is as good as new.

Condition: refurbished (used), Year of construction: 2011, Used automatic metal band saw MEP SHARK 282 nc evo Year of manufacture: 2011 Blade dimensions: 2950x27x0.9mm Cutting angle: from -45° to +60° Ledpfjykvg Hox Afusri Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Blade cutting speed: from 15 to 100m/min Cutting capacity at 0°: - round 250mm - square 220mm - rectangle 280x220mm Machine weight: 980kg The machine is fully refurbished.

Condition: new, dimensions of saw-band 2950x27x0,9 mm 36/72 m/min 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 230 mm capacity 90 degrees: flat 280x200 mm capacity 45 degrees: round 190 mm capacity 45 degrees: square 180 mm capacity 45 degrees: flat 180x180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 110x110 mm Lsdpfx Afoyvvqkjujri total power requirement 1,5/1,8 kW weight 375 kg dimensions 1700x1000x1650 mm Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed

Condition: used, Year of construction: 2013, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm 110 mm Ledpfxjyvvqdo Afusri 95 mm 135 x 60 mm 120 mm 100 mm 135 x 60 mm 180 mm dimensions of saw-blade 350 x 32 x 3,4 mm machine weight ab. 600 kg

Condition: used, Year of construction: 1999, dimensions of saw-band 3150x27x0,9 mm 40/80 m/min capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 320x200 mm 230 mm 210 mm 210x240 mm 180 mm 160 mm 110x250 mm capacity 60 degrees: round 150 mm capacity 60 degrees: square 140 mm capacity 60 degrees: flat 140x160 mm work height max. 870 mm Overall size 2100x2050x1950 mm Control NC weight of the machine ca. 770 kg Lodpfsyvvp Hsx Afueri

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm Lodpfoyvvpmjx Afusri speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW

Condition: used, Year of construction: 2021, saw blade diameter 370x32x3 mm Ledpfx Afjyvvpaoujri 15-150 U/min vice 190 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180x100 mm 115 mm 90 mm 90x90 mm 115 mm 100 mm 120x100 mm 115 mm 100 mm 120x100 mm total power requirement 5,5 kW weight 615 kg Overall size 1400x1400x2000 mm

Condition: used, Year of construction: 2020, dimensions of saw-blade 350x32x4 mm vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm Lsdpfx Aeyvvnpjfusri output 2,2 kw weight 225 kg

Condition: used, Year of construction: 2006, dimensions of saw-band 2950x27x0,9 mm 15-100 m/min 285 mm capacity 90 degrees: square 220 mm capacity 90 degrees: round 250 mm capacity 90 degrees: flat 280x220 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm Ledpfeyvvm Ejx Afusri capacity 45 degrees: flat 220x200/200x140 mm total power requirement 2,2 kW Weight 990 kg Overall size 2500x2230x2050 mm Accessories / equipment: - Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mm

Condition: used, Year of construction: 2018, dimensions of saw-band 3650x27x0,9 mm speed 15/100 m/min capacity 90 degrees: round 280 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm Ledpfx Asyvvmlofuori capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm total power requirement 2,2 kW vice 340 mm weight 1240 kg dimensions 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Saw blade diameter: 370x32x3 mm 4 speeds: 15-150 rpm Vice: 190 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 180x100 mm Cutting range at 60 degrees left: round 115 mm Cutting range at 60 degrees left: square 90 mm Cutting range at 60 degrees left: flat 90x90 mm Cutting range at 45 degrees left: round 115 mm Cutting range at 45 degrees left: square 100 mm Cutting range at 45 degrees left: flat 120x100 mm Cutting range at 45 degrees right: round 115 mm Cutting range at 45 degrees right: square 100 mm Cutting range at 45 degrees right: flat 120x100 mm Total power requirement: 5.5 kW Weight: 615 kg Machine dimensions: 1400x1400x2000 mm Electropneumatic, semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: - Saw head glides on precision linear double ball bearing guides - Three-speed gearbox - Infinitely variable speeds from 15-150 rpm - Vice opening 190 mm - Stroke of saw head programmable directly from the control panel, for adjustment to cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 370x32x3 mm for solid and profile material - Vice with counterhold device for double clamping of the workpiece - Base frame with removable coolant tray - Chip removal brush - Length stop for repeat length cutting - Material support arm, also suitable for connecting conveyor track/loading side - Machine designed for pallet truck transport - Includes tools and operating manual Electrical equipment: - Control panel - Marked cable connections - Indicator light for operational readiness - Main safety switch - LED check indicator on control panel to monitor machine functions - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle with IP 55 protection - Low voltage system 24 Volt - Electrical coolant system for saw blade lubrication and cooling (micro-spray device can be fitted) - Motor 5.5 kW - 400 Volt Ledpoyvt Nkjfx Afusri

Condition: like new (used), Year of construction: 2016, Used band saw for metal MEP Shark 281 sxi evo Semi-automatic operation mode Year: 2016 Lredpfxsvtfkco Afuei Blade dimensions: 2950x27x0.9 mm Miter angle: up to 60° Inverter: 15–100 m/min Max vise opening: 285 mm Connection: 400V Weight: 435 kg Saw has been serviced.

Condition: used, Year of construction: 2023, cutting diameter 450 mm saw band length 6600 x 41 x 1,3 mm table height 800 mm 450 mm 450 mm 450 x 270 mm workpiece weight 15 - 95 m/min 7,5 kW work height max. 3000 kg connected load 3750 x 1400 x 2100 mm NEW PRICE ~ 40.700 EURO very good condition Semi-automatic bandsaw, two-column guided Equipment: - hydraulic vice - infinitely variable cutting speed - chip conveyor - line laser - driven chip brush - coolant device - operating instructions Lrodpfoytx Sqox Afuji

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Lrodpfx Afjyv Nylousi Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 380x250 mm 260 mm 250 mm 300x200 mm 180 mm 170 mm 200x170 mm 240 mm 210 mm 280x160 mm dimensions of saw-band 3770x27x0,9 mm 385 mm speed 40/80 m/min Lodeyv Ntrepfx Afuori total power requirement 1,5/1,8 kW weight 695 kg

Condition: new, dimensions of saw-blade 350 x 32 x 3,4 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 1,5/2,2 kw Lrjdpfxjyv Nqqs Afusi weight 280 kg

Condition: new, dimensions of saw-band 2950x27x0,9 mm Lodpfx Afeyv Nptsujri 2 speeds 36/72 m/min Vice opening 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 280x220 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm capacity 45 degrees: flat 220x200/200x140 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm output 1,5 / 1,8 kW Weight 440 kg dimensions 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove

Condition: new, 36/72 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm capacity 45 degrees: round 260/200 mm Lrjdpfxsyv Nmlo Afuji capacity 45 degrees: square 250/180 mm capacity 45 degrees: flat 270x200/200x160 mm dimensions of saw-band 3650x27x0,9 mm total power requirement 1,5/1,8 kW Overall size 2130x1400x1950 mm Weight 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically.

Condition: new, saw blade diameter 350 x 32 x 2,5 mm 15/30/45/90 U/min vice 190 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180x95 mm 90 mm 90 mm 110 mm 95 mm 125x95 mm Lodpfx Afeyv Nl Isuori 110 mm 95 mm 125x95 mm total power requirement 1,8/2,5 kW weight 410 kg

Condition: new, dimensions of saw-band 4640x34x1,1 mm 15-100 m/min 515 mm capacity 90 degrees: square 320 mm capacity 90 degrees: round 330 mm capacity 90 degrees: flat 510x320 mm 320 mm 320 mm 350x320 mm 230 mm 230 mm Ljdpjyv Nkkefx Afusri 230x310 mm 320 mm 320 mm 380x320 mm 250 mm 250 mm 250x320 mm total power requirement 4 kW Weight 1190 kg Overall size 2000x1200x1800 mm

Condition: new, saw blade diameter 350 x 32 x 2,5 mm 2 speeds 30/60 UpM vice 130 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 130x80 mm Lrjdjyv Ni Tepfx Afuoi 100 mm 85 mm 90x80 mm 75 mm 75 mm 90x65 mm total power requirement 1,1/2,2 kW weight 220 kg Equipment: - including machine base

Condition: new, 36/72 m/min 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 230 mm capacity 90 degrees: flat 280x200 mm capacity 45 degrees: round 190 mm capacity 45 degrees: square 180 mm capacity 45 degrees: flat 180x180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 110x110 mm Lrjdpfx Ajyv Nfuofusi dimensions of saw-band 2950 x 27 x 0,9 mm output 1,5 / 1,8 kW Weight 435 kg dimensions 1700x1000x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens