Used Eisele for sale (112)

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Itsdpfx Acoxpd D Nouen Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: good (used), Year of construction: 1972, Specification VMS II Cut at 90° (Flat) approx. 140 × 70 mm Cut at 90° (Round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (Flat), Round: 80 mm Speed 40/80 rpm Coolant available Itodpfx Aew Ecydecuon Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m

Condition: used, Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Itodpfsxn Ivgex Acuon Coolant lubrication

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Saw blade size 370 mm, 1700 + 3400 rpm • Feed cylinder with pneumatic control and limit switch Itsdpfoxptxpox Acuon • Double clamping arm (pneumatic)

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Iodpfx Ajvdk A Eocuetn Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted Ijdpfjkfp D Tex Acustn

Condition: used, Year of construction: 2014, machine/vehicle number: 0101-250007, The Behringer Eisele HCS 160 MF Straight Cut Fully Automatic Metal Circular Saw is a high-quality, robust machine specifically designed for professional use and maximum cutting performance in metalworking, additionally engineered for multi-shift operations. It offers an excellent combination of power, precision, and versatility, making it particularly suitable for large production runs. The fully automatic saw comes equipped with a comprehensive material loading and unloading system. The loading magazine is positioned on the infeed side, while on the outfeed side, short pieces can be discharged from the conveyor into designated containers at three different positions using a pusher via the unloading device. Itsdpfexl R Nksx Acuen

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm Itsdpfexln Ukox Acusn at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Itjdpoxn Iq Djfx Acuon Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : Itedpfoxmuzaox Acusn 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Base machine weight: approx. 450 kg Infeed roller conveyor weight: approx. 140 kg Good condition Ijdsxk Uunspfx Acuetn

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Iedpfxsxpqzhj Acujtn Optional: - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff

Condition: good (used), Year of construction: 1993, Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner Iedpfx Aetxkprscuotn -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: excellent (used), Year of construction: 2007, Saw blade diameter: 370 mm Isdpjxlgz Nofx Acujtn Cutting capacity flat at 90/45/30°: 200 x 100 / 140 x 100 / 100 x 100 mm Cutting capacity square at 90/45/30°: 120 / 100 / 90 mm Cutting capacity round at 90 & 45 / at 30°: 130 / 105 mm 2 saw blade speeds Drive motor: 2 / 2.6 kW Weight: 430 kg Space required: 800 x 700 x 1770 mm

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Itjdpfx Asxl Dz Tecuon Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Isdpfxjvbwfne Acustn

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min Itjdpfxoxg A Iuj Acuon . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Year of construction: 2023, operating hours: 109 h, condition: like new (used), functionality: fully functional, High-performance extraction unit for aluminium chips MG 9V Itsdpfx Ajxmhkbjcusn Centrifugal fan with soundproofed housing, M-class filter, chips fall downwards into a customer-supplied container, max. drop height 1,100 mm Drive: 4.0 kW, 400 V, 50 Hz, max. air volume flow 4,000 m3/h, noise level below 80 dB(A), selector switch for continuous operation or control via the saw. Equipped with 2 connection nozzles D160 mm, dimensions when assembled: 1825 x 1140 x 4675 mm, finish RAL 9016

Condition: used, Year of construction: 1989, - Pneumatic feed (stepless) - Pneumatic workpiece clamping - Mitre cuts ± 45° - Coolant system - Year of manufacture: 1989 - Cutting capacity round: 120 mm - Cutting capacity flat: 200 x 90 mm - Cutting capacity square: 90 mm - Cutting capacity solid material: 100 mm - Cutting capacity mitre: 140 x 110 mm - Saw blade diameter: max. 350 mm - Speeds: 17 / 34 rpm - Motor power: 2.6 kW - Operating voltage: 400 V Itodexdxp Aopfx Acuon - Dimensions (W x H x D): approx. 950 x 1900 x 1100 mm - Weight: approx. 450 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 360 kg, • Dimensions (W × H × D): 900 × 1,180 × 750 mm • Weight: approx. 360 kg • Drive type: hydropneumatic • Operating pressure: 8 bar Itedpsxl Hq Rofx Acuon • Air consumption: 40 l / stroke at 8 bar • Pressing force: 32 kN at 8 bar • Pneumatic connection: R ¼" • Press stroke: 17 mm • Return stroke: 140 mm • Maximum pressing height: 150 mm • Maximum profile height: 210 mm

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) Ijdpfsvcmirjx Acuotn

Condition: excellent (used), functionality: fully functional, Saw blade 440 mm Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vise Cutting areas: 200 x 100 mm (square tube) 45° miter on one side Itsdpfsxd Riuox Acuen Weight approx. 750 kg .

Condition: like new (used), Year of construction: 2024, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 190551920245099737, saw blade diameter: 500 mm, We are selling a saw-drilling-threading automation machine, Profilma 540 BG, designed for cutting to length, drilling, and threading of aluminium profiles. This is a special-purpose machine that was purchased for the production of solar components. The scope of delivery includes: - Roller conveyor RD500, length 6000 mm - Pre-installation for chip extraction MG9 Itedpfxjxmhhgj Acujn - Database for storing cutting data under profile number - 32 pcs combined machine taps M8x1.25 - 2 pcs carbide saw blades 500x3 mm The machine has only 9 operating hours.

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Saw blade size 370 mm, 1700 + 3400 rpm • Feed cylinder with pneumatic control and limit switch • Double clamping arm (pneumatic) Iedexcp Iaepfx Acuotn

Condition: like new (used), Year of construction: 2024, operating hours: 190 h, functionality: fully functional, machine/vehicle number: 190551920245099676, saw blade diameter: 500 mm, We are selling a saw automatic saw-punching solution Profilma 502ST-V for cutting to length and punching aluminium profiles. This is a special-purpose machine that was acquired for the production of solar mid clamps. Itsdpfx Acsxmhf Ejusn