Used Ehlers for sale (135)

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M06L/7593, Offer Number: M06L/7593 Machinetype: double blow header Make: PELTZER-EHLERS Type: DKP16 Constr. year: 1972 diameter range: 8-16 mm shaft length under head: 25-180 mm max. cut-off length: 220 mm output - pieces/min: 70 Location: In our warehouse Gsdpfx Aewi S Sweftjbu

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Godpfx Ast Nhmheftsbu

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: approx. 40 bar -Liter output: 15 l/min -Drive: 0.55 kW 1400 rpm Gsdpfjb A Hdqox Aftobu -Hydraulic tank -Foot switch -Weight: 100 kg

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: M04L/7486, Offer Number: M04L/7486 Gbedpfx Ajwi S T Ieftou Machinetype: pointing machine Make: PELTZER-EHLERS Type: NBAM-16 Constr. year: 1975 diameter range: 16 mm shaft length under head: 25 -160 mm output pieces/min: 110 Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M08L/7516, Offer Number: M08L/7516 Machinetype: 4 die - 4 blow transfer header Make: PELTZER-EHLERS Type: GB1 Constr. year: 1970 diameter range: 12 mm number of dies: 4 Gbedpfxewi S Tne Aftju number of stations: 5 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 125 press power: 65 to Location: In our warehouse

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: M08E/7519, Offer Number: M08E/7519 Machinetype: 4 die - 4 blow transfer header Gbedpfxowi S Tho Aftou Make: PELTZER-EHLERS Type: GB3 Constr. year: 1975 diameter range: 10- 18 mm number of dies: 4 number of stations: 5 cutting length: 155 mm shaft length under head: 125 mm output - pieces/min: 90 press power: 200 to max diameter of the head: 35 mm Location: Europe

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: M14L/8133, Offer Number: M14L/8133 Machinetype: thread rolling machine - flat die Info: tube feeder for studs and headless parts Gbjdpfx Aewi S Irsftou Make: PELTZER-EHLERS Type: NKW12-ST8 Constr. year: 1971 diameter range: 6-12mm shaft length under head: 95 mm max. thread length: 90 mm output pieces/min: 55 Location: In our warehouse

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M06L/8308, Offer Number: M06L/8308 Machinetype: double blow header Make: PELTZER-EHLERS Type: DKP6 Constr. year: 1978 Gsdjwi S D Hspfx Aftobu diameter range: 3-6,5mm shaft length under head: 8-75 mm max. cut-off length: 100 mm output pieces/min: 150 Location: In our warehouse

Condition: used, Year of construction: 1979, Year 1979 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Gjdpfx Ajxmk E Ujftebu Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 2011, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control Siemens 840 D turning speeds 18.000 U/min no. of tables 2 table dimensions 500 x 650 mm number of tool places 120 Pos. tool taper HSK 63 In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features & accessories: - Fully protected cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area BLUM laser - 3 D measuring probe - Operating mode 3 + 4 - IKZ 40 bar with 600 l tank and paper belt filter - Chip flushing gun with pump 1 bar/40 l - Chip conveyor - Brankamp monitoring - Signal light 3 – colored Godpfx Asxmk E Ioftebu - Coolant ring nozzle - Blow air cooling device - Coolant device - Oil/emulsion mist separation system - Control cabinet cooling device Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, Year of construction: 1990, table length 800 mm table width 300 mm grinding wheel diameter 400 mm Gedpfx Afjxmk Ezetsbu grinding wheel width 50 mm turning speed range 1470 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1988, Year 1988 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Gbodpfoxmk Eujx Aftsu

Condition: used, grinding length 500 mm grinding width 200 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject Gbsdpoxmk Ensfx Afteu to prior sale!

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm Gjdpfoxmapvsx Aftebu swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Technical Features & Accessories: - Y axis - Accessory package with fixed and driven tool holders Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, x-axis 600 mm y-axis 400 mm z-axis 400 mm The machine is defective and is being sold as a spare parts carrier. Accessories, tools, and clamping devices shown are only included in the scope of delivery Gedpfxoxmapis Aftsbu if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, x-axis 550 mm y-axis 650 mm z-axis 450 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Gbjdpfx Ajxmapcsftsu

Year of construction: 2017, condition: used, engine 12 Zylinder cubic capacity 57200 ccm total power requirement 3.438 kW Electric capacity 1.516 kw thermal performance 1.425 kW Number of working hours ca. 34.683 h In our opinion, the machine is in good used Gedpfx Afow Rrgcotebu condition and can be inspected under power by appointment. The combined heat and power unit is sold professionally dismantled and free on truck. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale.

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Godpfx Ajxl E Tqeftjbu subject to prior sale!

Condition: used, Year of construction: 2015, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm Control Heidenhain iTNC 640 table dimensions 1.250 x 610 mm spindle tunring speed 12.000 U/min spindle taper SK 40 rapid traverse 32 m/min number of tool places 30 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Internal cooling Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Gbsdpfxexg R N Hs Aftou subject to prior sale!

Condition: used, Year of construction: 2015, control Siemens mit ShopTurn Swing diameter over bed 470 mm turning diameter 196 mm turning length 444 mm Gsdpfxoxgu Rhs Aftjbu Feed size 200 mm spindle bore 62 mm bar passage 52 mm spindle tunring speed 4.500 U/min z-travel 520 mm x-travel 161 mm rapid traverse (x/z) 30 m/min number of tool places 12 Pos. Number of working hours ca. 14.287 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Parts catcher - Chip conveyor - C axis - Various fixed and driven tool holders Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2007, control MSX-850 III turning length 510 mm max. turning diameter 356 mm Gbodpfexgu N Rex Afteu greates pass round over bed 923 mm swing diameter over slide rest 755 mm bar passage 65 mm spindle tunring speed 5.000 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2008, condition: used, work piece width 20 - 400 mm workpiece height 5 - 40 mm workpiece length 500 - 6.000 mm max. workpiece weight 100 kg no. of heating areas 5 Stück useable dimensions LxBxH: 6.500 x 635 x 350 mm Gsdpew R Ehysfx Aftjbu permissible operating temperature 1150 °C In our opinion, the system is in good used condition and can be inspected under power by appointment. The hardening system consists of the following components: 1. Hardening oven for nitrogen / endogas operation - Manufacturer: Schwartz - Type: GA 1668 - Year of construction: 2008 - max. temperature: 1200°C - Dimensions LxWxH: 8,130 x 2,671 x 3,305 mm - Weight: 12,500 kg - Total power requirement: 125 kW 2. Cooling zone - Manufacturer: Schwartz - Year of construction: 2008 - Number of cooling zones: 2 - Dimensions LxWxH: 6,405 x 2,789 x 3,208 mm 3. Roller conveyor with drive - Manufacturer: Schwartz - Year of construction: 2008 4. Warm salt bath, electrically heated - Manufacturer: Bredtmann Girke - Year of construction: 1977 - Total power requirement: 72 kW 5. Nitrogen battery - Manufacturer: Air Liquidie - Type: BR50 2x1 - Year of construction: 2008 6. Monorail - crane system - Manufacturer: ABUS - Type: GM5 1000.6-1 - Year of construction: 2008 - Load capacity: 1,000kg Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2008, x-travel 2.500 mm y-travel 1.000 mm z-travel 770 mm control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 30 Pos. Number of working hours ca. 61.629 h spindle hours ca. 33.186 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Handwheel - Internal cooling, 25 bar with belt filter - Flushing gun - Compressed air gun Gjdpfx Afexgicretebu - Full enclosure - Receiver Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2010, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain iTNC 530 spindle tunring speed 30.000 U/min tool taper HSK E50 number of tool places 28 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - 4+5 axes - Clamping device, Erowa Power Chuck ITS148 - Clamping device, Erowa UPC - Blum laser - Renishaw 3D probe Gbodjxgiclspfx Aftsu - Extraction system Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2002, x-travel 1100 mm y-travel 710 mm z-travel 710 mm Control Heidenhain iTNC 530 Number of working hours ca. 79.360 h spindle hours ca. 34.555 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Godpfx Afjxgicfotebu Subject to changes and errors in the technical data and information, as well as subject to prior sale!