Used Ehps for sale (30)

Condition: good (used), Year of construction: 1990, Pressure 320 t folding length 8050 mm column width 7550 mm Control Cybelec ModEva 12S Equipment/accessories: - CNC-controlled backgauge x-direction and R-direction - motorized die shift M1 and M2 - 2 x pneumatic bending aids in front - pneumatic sheet holding unit - automatic die clamping at the top - motorized crowning rebuild 2009: - motorized die shift 111-112 mechanical and electrical NEW - backgauge X-R mechanical and electrical NEW Djdshwib Tspfx Ah Uekw - Punch clamping automatic mechanical and electrical NEW - CNC control mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main pump hydraulics NEW

Year of construction: 1990, condition: used, pression: 250 t Dkedpfx Ahe Dqaqo Ujw working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm Djdsb Rk Ekjpfx Ah Uekw - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Dkedstva Dnspfx Ah Usw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 209255, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 110 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Djdpfx Ahjwkqr Ss Ujkw Installation height: max. 480 mm Control system: DNC70 Pressing force: max. 1,100 kN Oil volume: 340 l MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 380 V Control voltage: AC 220/24 V Rated current: 37 A Rated current of the main fuse: 63 A EQUIPMENT - 1 set of upper and 1 set of lower tools

Condition: not inspected (used), Year of construction: 1992, CNC folding machine make: EHT, type: EHPS 11 - 45, SN: 206882, year: 1992, pressure capacity: 1,100 kN, working range: 4,450 mm, CNC control Cybelec, 2-hand operation, safety device make: Trumpf, retrofitted in 2023, last maintenance in 2023 by Trumpf for approx. €10,000.00, Dodpfx Ahjv Duu Ee Uskw Note: Machine already professionally dismantled and ready for transport

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg Dkjdpsxn Srxefx Ah Uow EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Dedpfx Ahstqmvzj Uskw Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 210860, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 150 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Dsdpfxowbuuro Ah Uekw Press force: max. 1,500 kN Oil volume: 400 l Control type: UN9D1APSE MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Power of the main motor: 18.5 kW EQUIPMENT - Various special tools

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1990, controller model: Cybelec ModEva 12S, bending force (max.): 320 t, working width: 8,050 mm, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW Dedpfjw Sttaex Ah Ujkw - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: used, functionality: fully functional, Hydraulic bar steel shear with punch Manufacturer: Epple Model: E-HPS 65 E-Line Technical specifications Manufacturer Epple Model E-HPS 65 E-Line Stations 5 Punching force 65 t Max. punching capacity Ø 26 x 20 mm Stroke 55 mm Working radius 305 mm Working height 1,030 mm Motor 5.5 kW Dimensions (LxWxH) 1.7 x 0.95 x 1.90 m Djdowtqmnopfx Ah Uokw Weight 1.6 t Equipment - Electric contact stop All details without guarantee. A demonstration is available at any time in our exhibition hall.

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown Dodpfed Ih S Uex Ah Uekw 3 sets of tools included

Condition: new, Year of construction: 2025, pressing force: 200 t, table width: 800 mm, table length: 1,000 mm, retraction force: 100 t, Equipment: safety light barrier, H TYPE HYDRAULIC PRESSES GENERAL SPECIFICATIONS – EHSP o Steel construction body and parts with stress / welding tension removed by vibration method o PLC control and touch panel o Argon application for fixing elements and steel drawn pipes o EN ISO 15614-1 / 2017 welding application certificate which has been approved by TURK-AK and passed WPQR and WPS approval. (by certified engineers according to EN ISO 14731) o Parallelism and vertical tolerance are applied according to ISO and DIN norms. (≤ 120 microns/meter) o PARKER or REXROTH hydraulic unit o SIEMENS / SCHNEIDER in switchear components o Automatic central lubrication system o Two-hand operation Cooling system 200 TON H TYPE SERVO HYBRID HYDRAULIC PRESS TECHNICAL SPECIFICATION – EHP TYPE H Type Steel Structure with 8 Guided Working Table BODY MATERIAL St52 SLIDE BEDS KESTLUB CAPACITY (RAM) 200 TONS CAPACITY (POT) 100 TONS MAIN TABLE SIZE 1000 x 800 mm HORIZONTAL PRECISSION 120 micron/mt. PERPENDICULAR PRECISSION 60 micron/mt. STROKE (RAM) 600 mm STROKE (POT) 200 mm MIN. OPENING HEIGHT 200 mm MAX. OPENING HEIGHT 800 mm STRESS RELIEF after WELDING By high frequency vibration technology WELDING APPLICATION - EN ISO 15614-1 / 2017 welding application certificate which is WPQR and WPS approved by TURK-AK. (Welding applications are inspected by engineers certified according to EN ISO 14731) MAX. PRESSURE 250 Bar MOTOR POWER 30 kW – HAWE – SERVO MOTOR FREE FALLING SPEED 150 mm/sec. PRESSING SPEED 15 mm/sec. ASCENDING SPEED 200 mm/sec. RAM CYLINDER DIAMETER Ø 320 mm – Ck45 POT CYLINDER DIAMETER Ø 230 mm – Ck45 Dkedpfev D Rv Eex Ah Uew AUXILIARY CYLINDER NUMBER 2 pcs. PRESS HEIGHT 4400 mm PRESS DEPTH 1800 mm PRESS WIDTH 1400 mm TABLE HEIGHT FROM FLOOR 1150 mm ENGINE Protection Class IE3 PRESSURE FILTER PARKER USED VALVES HAWE FILTER POLLUTION WARNIG ELECTRONIC CONTROLLED LUBRICATION AUTOMATIC – ADJUSTABLE ON THE SCREEN RAM STROKE ADJUSTMENT ADJUSTABLE ON THE SCREEN RAM TONNAGE ADJUSTMENT ADJUSTABLE ON THE SCREEN SYSTEM ERROR INFORMATION ADJUSTABLE ON THE SCREEN PRESS CONDITION INFORMATION ADJUSTABLE ON THE SCREEN MOLD MEMORY ADJUSTABLE ON THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION ADJUSTABLE ON THE SCREEN LINEAR TRANSDUCER NOVATECHNIK or TURCK TEMPERATURE SENSOR PT100 4.20 mA. ORDEL PLC SIEMENS S71510 TOUCHSCREEN PANEL SIEMENS KTP 7 '' ELECTRICAL COMPONENTS SIEMENS – SCHNEIDER SAFETY LIGHT CURTAINS PILZ– 2 pc. APPROXIMATE WEIGHT 10 TONS

Condition: used, Year of construction: 2018, pressure 800 t stroke 80 – 360 / 400 mm no. of strokes 3 – 60 /min distance between columns 4200 mm dayligth (stroke and adjustment up) 1400 mm column travel -side 1800 mm table surface area 4000 x 1800 mm Dksdpfxew D Hkds Ah Uew hole in the table 3400 x 450 mm table height over floor 950 mm ram surface 4000 x 1700 mm ram adjustment 305 mm material width 800 mm material thickness 0,7 - 6,0 mm material cross-cut 2800 mm² power requirement 475,0 kW Weight 154,00 t dimensions of the machine ca. 6,05 x 3,95 x 7,7 mxmxm total height over floor 6,6 m Servo-Press (Press, Coil Line, Transfer) - Press Schuler, MSD 2-800-4.0x1.8-400 Servo - eccentric drive in transverse-shaft design via 2 torque motors, hydraulic overload protection, motorised ram adjustment, ram counterbalance, main control panel with TFT touch colour display motor-driven retractable change plate, hydraulic slide-in clamping elements - Coil Line Schuler-Automation AC-UEL-M-0800 / AC-SH-9-70/160-0800 R-L / AC-RM-EHP-0800 Transfer Schuler-Automation AT2-M-800-500-405

Condition: used, mileage: 209,980 km, power: 265 kW (360.30 HP), first registration: 06/2017, overall weight: 34,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, next inspection (TÜV): 05/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * · · · ??Liebe Interessenten, ??gerne können Sie uns über WhatsApp kontaktieren: ???.Für Anfragen außerhalb von Deutschland nutzen Sie bitte die internationale Rufnummer: · ? 6569??.Wir freuen uns auf Ihre Nachricht * LKW MAN TGS 32.360 8x2 * Frontlader Heil * Heil EHP 213413 P1783 * Waage * Radstand ca. 4,80 m * Euro 6 * Automatik Getriebe * Klimaautomatik * Federung: Blatt/Blatt/Luft/Luft * ABS * Sonnenblende * 3 x Lenkachse * Liftachse * Kamera * el FH el Siegel Spiegelheizung * Sitzheizung * Nebenantrieb * Rundumlicht * Differenzialsperre * Telefon * Radio CD * Fleet Bord * abbiege Assistent * Reifen 315/70R22,5 ca. 60-30-30-40% Dksdsxtrpzopfx Ah Uow * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp 00496569

Condition: used, length: 2750width: 1100heigth: 2050weight approx.: 3500pressure: 50bending length: 2550 CNC Bending Press 3 Axes Y1, Y2, and Z Hydraulic Tool Clamping for the Upper Tool Darley System Technical Details: Machine Type: EHP 50.25/20 Max. Pressing Force: 500 kN Bending Length: 2550 mm Downward Speed: 100 mm/s Dodpfx Ahewiatpj Uskw Max. Pressing Speed: 13.5 mm/s Return Speed: 75 mm/s Stroke Length: 120 mm Cylinders: 2 pcs Motor Power: 5.5 kW Oil Tank: 100 Liters

Condition: good (used), Year of construction: 2001, working width: 2,500 mm, overall weight: 6,800 kg, Equipment: european tool clamping system, Press Brake Darley EHP-LT80 Dkjdpoxnxdbsfx Ah Uow Pressing force: 80 tons Working length: 2500 mm Year of manufacture: 2001 Machine weight: 6800 kg Control: Delem 69 No tools included, compatible with Amada tools

Condition: ready for operation (used), Year of construction: 2002, Very neat used press brake from Darley Dsdpfx Ahowmc Epo Ujkw Type EHP LS 230 43 37 Capacity 4300 x 230 ton Delem DA 66W CNC control CNC Bombering Y1, Y2, X1, X2, R1, R2, Z1 and Z2 axis CNC controlled Hydraulic Wila New Standard upper and lower clamping

Year of construction: 1992, condition: excellent (used), Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: - Control Delem DA 58 Dedpfjh U A Ibex Ah Uekw - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm Dodogxnkcjpfx Ah Uskw -Stroke: 250 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 855/285/380 mm -Weight: 311 kg / pc.

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm Dodpfxsuhf Tzj Ah Uekw throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: used, mileage: 204,482 km, power: 265 kW (360.30 HP), first registration: 05/2018, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, maximum load weight: 8,380 kg, empty load weight: 17,620 kg, wheelbase: 4,200 mm, gearing type: semi-automatic, emission class: euro6, suspension: steel-air, total length: 10,700 mm, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, traction control, Heil EHP 13431, trailing steering axle, scale, non-binding offer—modifications and prior sale reserved—the sale is carried out with exclusion of any warranty—all information given without guarantee! Dkjdpfx Aew Ta U Tsh Uow

Condition: new, Year of construction: 2022, functionality: fully functional, Parker piston accumulator EHP WP 145 bore dimension 150 mm Dkjdpfxjuac Efj Ah Uow temp -20/+80 LARGE STOCK AVAILABLE

Condition: good (used), Year of construction: 1997, pressing force: 200 t, Press brake DARLEY - EHP 200 / 3600 Djdswrx Nhspfx Ah Ujkw MACH-ID 9153 Manufacturer: DARLEY Type: EHP 200 / 3600 Control: DA 65 Delem Year of build: 1997

Condition: used, Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces -Length: 515 mm -Socket: Ø 25 mm -Price: complete Dedpfx Asgxnkkeh Uokw -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.