Used Eht Ehp 11-40 for sale (55)

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm Dwodpfx Aogxnkcsh Ued -Stroke: 250 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece -Dimensions .: 855/285/380 mm -Weight: 311 kg / pc.

Condition: used, Stop for press brake, edging bench, guillotine shears, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40 2 pieces -Length: 515 mm Dodpfx Ahjgxnkke Uswd -Socket: Ø 25 mm -Price: complete -Dimension: Ø 50 x 515 mm -Weight 5.1 kg / pc.

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, Dedpfx Ahjtqmvzs Ujwd - universal die

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 209255, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 110 t, TECHNICAL DETAILS Dsdpfx Ajwkqr Soh Ujwd Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Control system: DNC70 Pressing force: max. 1,100 kN Oil volume: 340 l MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 380 V Control voltage: AC 220/24 V Rated current: 37 A Rated current of the main fuse: 63 A EQUIPMENT - 1 set of upper and 1 set of lower tools

Condition: not inspected (used), Year of construction: 1992, CNC folding machine make: EHT, type: EHPS 11 - 45, SN: 206882, year: 1992, pressure capacity: 1,100 kN, working range: 4,450 mm, CNC control Cybelec, 2-hand operation, safety device make: Trumpf, retrofitted in 2023, last maintenance in 2023 by Trumpf for approx. €10,000.00, Note: Machine already professionally dismantled and ready for transport Dedpfjv Duu Eex Ah Uswd

Condition: good (used), functionality: fully functional, Year of construction: 1995, Pressure: 300 t Bending length: 4050 mm Distance between columns: 3550 mm Oil capacity: 400 l Control: MOD EVA 19T Total power requirement: 22 kW Machine weight approx.: 20,000 kg Dodpsxu I Uvofx Ah Uswd Equipment: - CNC control Cybelec ModEva 19 T - 2 bending aids - Die shifting - Pneumatic tool clamping (top and bottom) - Crowning system - Controlled axes: y1, y2, x, R, z1, z2 - Two-hand and foot control - 2 parking stations for bending aid

Year of construction: 1987, condition: used, fabric-no. 202 395 working length 2550 mm output 2000 KN Djdpfx Asq Awh Rsh Uewd tracking travel 13 mm safety distance 176 mm

Condition: used, Year of construction: 1998, pressure 175 t chamfer lenght 4050 mm distance between columns 3050 mm throat 300 mm stroke 240 mm stroke speed - idle stroke downwards max. 140 mm/sec working feed max. 9 mm/sec stroke speed -return max. 130 mm/sec distance between table / ram min. 370 - max. 610 mm control CYBELEC DNC 880S Dwedotv Rh Aspfx Ah Uod total power requirement 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 5,89 x 3,6 x 3,16 m - controlled axes: Y1, Y2, X, R - crowning - Bending aid - Control CYBELEC DNC 880S - swiveling operation, front right - 4x stop fingers manually adjustable - foot switch - 1 set of upper tools - 1 set of lower tool - 2x material support arms in front - side + rear protection - Operation manual

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, EHT hydraulic guillotine shear type TSS 3-40, working width 4100 mm, max. sheet thickness 3.0 mm, pneumatic sheet support device, NC controlled backgauge, support arms, extra set of blades. Djdpfx Aew Uf Nrjh Uewd

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t working width: 4500 mm clear support width: 3050 mm Dwjdpfx Ahsb N Evme Usd support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included Dwjdpfx Ahed Ih S Us Uod

Condition: good (used), functionality: fully functional, Year of construction: 2008, Press force: 170 t Bending length: 4050 mm Machine weight approx.: 16,300 kg Control: ModEva 10S Equipment: - CNC control Cybelec ModEva 10S - Lasersafe Dedpfx Ahexu I Ucj Ujwd - 2 sheet supports - Die shifting - Crowning system - Pneumatic tool clamping (top and bottom) - Controlled axes: y1, y2, x, R, z1, z2 - Tool cabinet with tools

Condition: not inspected (used), Year of construction: 1992, Plate shears make: EHT, type: TSS 4 - 40, SN: 105129, year of manufacture: 1992, working range: 4,000 x 4 mm, digital display, Note: Machine already professionally dismantled and ready for transport Dedpsv Duicsfx Ah Uswd

Condition: used, Year of construction: 1996, pressure 175 t chamfer lenght 4050 mm distance between columns 3050 mm column arm 300 mm ajustment speed 140 mm/sec work speed 10.0 mm/sec return speed 130 mm/sec work stroke 360 mm dayligth 340 - 700 mm table height 1000 mm table width 200 mm oil volume 300 ltr. operating pressure max. 295 bar air pressure 4.5 - 6.0 bar voltage 3x 400 Volt total power requirement 15.0 - 27.0 kW weight 17200 kg range L-W-H 5850 x 2550 x 3200 mm good condition (!!) including new CNC control - in checked condition - machine video - ?v=Owh6BjvZ4RM Equipment: - electro-hydraulic CNC press brake - with new CYBELEC "VisiTouch 19" touch CNC control (conversion) * graphic numerical 2D control * 19? modern, streamlined touchscreen with glass surface * can also be operated with gloves * clear, well-arranged menus in the operator's language * easy operation thanks to the user-friendly HMI * large tool and product library - CNC controlled axes: * Y1+Y2 / X+X1 / R / Z1+Z2 / BV1+BV2 / I + CNC crowning - CNC electro-motoric back stop adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 500 mm/sec. * Adjustment in X1 axis possible .. +/- 125 mm Dwodpfx Ahsxab Exs Ued - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 85 - 235 mm * Adjustment speed .. max. 100 mm/sec. - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) - CNC-controlled / pneumatic die displacement (I axis) - 2x CNC-controlled front bending aids (BV axes) * Swivel angle max. .. 45 degrees * Swivel speed .. max. 45 degrees/sec. - CNC-controlled electric table crowning - pneumatic EHT upper tool clamp - pneumatic EHT lower tool clamp - 1x freely movable 2-hand/foot control - rear protective device (protective grille) - side protective device (swivel doors) - various bending tools - original operating instructions + circuit diagram etc.

Condition: good (used), functionality: fully functional, Year of construction: 1999, with control conversion to CYBELEC Visitouch 19 Pressure 125 t Bending length 4050 mm Frame width 3550 mm Throat depth 300 mm Installation height 560 mm Stroke 240 mm Back gauge - adjustable 5-1000 mm Dwjdowqfaqepfx Ah Ujd Control CYBELEC Visitouch 19 Dimensions L-W-H 5200x2200x3000 mm Total power requirement 18.5 kW Machine weight approx. 14,500 kg Equipment: - front bending aid - back gauge with 8 stop fingers - AKAS laser safety device in front of the machine - V-die block - segmented - upper tool - die shifting - two-hand operation - manual crowning - pneumatic upper and lower tool clamping

Condition: good (used), Year of construction: 1990, Pressure 320 t folding length 8050 mm column width 7550 mm Control Cybelec ModEva 12S Equipment/accessories: - CNC-controlled backgauge x-direction and R-direction - motorized die shift M1 and M2 - 2 x pneumatic bending aids in front - pneumatic sheet holding unit - automatic die clamping at the top Dwsdehwib Tjpfx Ah Ued - motorized crowning rebuild 2009: - motorized die shift 111-112 mechanical and electrical NEW - backgauge X-R mechanical and electrical NEW - Punch clamping automatic mechanical and electrical NEW - CNC control mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main pump hydraulics NEW

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm Djdpfx Aho Dqaqs Uowd rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers Djdpfxob Rk Ekj Ah Uewd - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Dwsdpfjtva Dnsx Ah Ued

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 210860, working width: 3,050 mm, stroke length: 280 mm, installation height: 480 mm, pressing force: 150 t, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Press force: max. 1,500 kN Oil volume: 400 l Control type: UN9D1APSE MACHINE DETAILS Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Power of the main motor: 18.5 kW Dwedpfx Ahowbuure Usd EQUIPMENT - Various special tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Dedpfoxn Srxjx Ah Uswd Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1990, controller model: Cybelec ModEva 12S, bending force (max.): 320 t, working width: 8,050 mm, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW Dwedpfxow Sttao Ah Ujd - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: used, Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm Dsdpfxogxnkve Ah Uewd -Weight: 147 kg

Condition: used, functionality: fully functional, Year of construction: 1981, control type: PLC-controlled, Guillotine Shear Manufacturer: EHS Model: 13-31 Year of Manufacture: 1981 Factory No.: 18443 Technical Data: Max. Shearing Capacity: 13 mm up to 440 N/mm² Max. Cutting Width: 3050 mm Blade Length: 3100 mm Clear Pass-Through: 3070 mm Adjustable Back Gauge: 10–1000 mm Adjustable Cutting Angle: 1° – 4° Equivalent Shearing Capacity: 2–13 mm Max. Pressure in Hydraulic System: 300 bar Pressure in Hold-Down System: 80 bar Pressure in Return System: 130 bar Nitrogen Precharge in Hydraulic Accumulator: 100 bar Oil Tank Capacity: 300 liters Operating Voltage, Three-phase: 380 V, 50 Hz Control Voltage: 220 V Total Connected Load: 16 kW Total Rated Current: 32 A Rated Current for Main Fuse: 50 A Total Weight: 7800 kg Dwsdpfsxu D Rmsx Ah Ujd

Condition: used, functionality: fully functional, control type: PLC-controlled, Hydraulic guillotine shear Manufacturer: EHT Model: EHS 13 - 31 Dwodpfoxu Dyuox Ah Ued Cutting length: 3100 mm Material thickness: 13 mm Backgauge