Used Melamin for sale (30)

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Kdsdoun N Auopfx Ab Tjh Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: like new (used), functionality: fully functional, AUTOMATIC EDGEBANDER machine model HOLZHER STREAMER 1057 second hand machine working condition : Excellent , like new Declaration of CE-conformity Conformity marking CE mark with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , solid wood max.mm.6 for furniture, furnishings, kitchens, bathrooms, doors, panels and various Kdedpfjyk E Dzsx Ab Teh Control HOLZ-HER KPL volt. 400/50 technical details: min. height of gluing panel mm.8 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 min. panel width mm.65 min. panel length mm.160 max.feed speed: 10 mt./min. support for large panels soundproof cabin glue system cartridge Composition machine . units : 1.Magazine for single strips HOLZ-HER Edge magazine 1903 2.Premilling unit . HOLZ-HER Premilling unit FG 201 3.Trimming saw 2 motors . HOLZ-HER Trimming saw 1918 PNEU 4.Flush/radius/chamfer milling units . 2 motors . HOLZ-HER Fine milling unit 1827 MAN 5.Corner rounding unit . HOLZ-HER Corner rounding unit 1832 . 1 motor 6.Scraper unit . Profile scraper, Flat scraper . HOLZ-HER Profile scraper unit 1929 HOLZ-HER Flat scraper unit 1964

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Comprising: - Feeding table Profi TBL100/20/06 (HOMAG, year 2014) - Profile KAL310/7/A3 (HOMAG, year 2014) The KAL is suitable for processing coated wood-based materials: - With melamine edges 0.3-0.4 mm Kdedpfx Aeqi Hqieb Tjh - With ABS and PP edges 1.0-2.0 mm (tools available: R 1.0, 1.5, 2.0) The machine is additionally equipped with a grooving unit for vertical and horizontal grooving and rebating. If interested, the complete order confirmation can be provided. The machine must be dismantled and loaded by the purchaser.

Condition: ready for operation (used), Year of construction: 2010, This IMA Advantage 310 edgebander was manufactured in 2010. It handles workpieces from 150 mm in length and 65 mm in width, with thicknesses up to 60 mm. It's equipped for various materials including chipboard and MDF, using melamine, paper, foil, or veneer edges. Features include a gluing unit, cutting unit, and a buffing unit, enhancing finishing processes. Consider the opportunity to buy this IMA Advantage 310 edgebander. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with max thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scraper blades; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: chipboard, mdf Kdjdex U U Dtspfx Ab Toh • Surface material: direct coating (melamine resin paper), paper, foil, veneer Extra Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Cut-to-length edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, bevel 15° Plastic edge up to 3.0 mm, depending on radius tool Milling strip flush up to 8 mm Machine Constant workpiece projection from the chain track: 35 mm + edge thickness Max. cutting cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Basic height (top edge of chain track): 940 mm Aggregate side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Joining Unit 08.379 and Blow Nozzle 2 motors 4 kW each, 9000 rpm Gluing Unit 283.1513 Glue dispenser 0.8 l, 60 mm high Suitable for hot melt or PU glue With single roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 pressure rollers Cutting Unit 08.415 Pneumatically swivels to 0° or 8 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy Trimming Unit SKF-L 4 motors, 12,000 rpm Profile length in throughfeed direction: Max. approx. 50 mm Workpiece thickness: Max. 60 mm Working speed: Max. approx. 20 m/min Distance between 2 workpieces: Min. approx. 400 mm Profile Scraper Unit 08.519 For rescraping an upper and lower milled quarter circle profile Self-Scanning Scraper Unit 08.521 For removing hot melt adhesive residue from the edge area of the top and bottom of workpieces Buffing Unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, STREAM SB LINE (WINNER W1 + STREAM C SB1/SB2 + SP30 + TURNER) Year of production: 2021 Technical condition: very good Panels: chipboard, MDF, HDF, plywood, joinery, solid wood Coatings: ABS / PVC / laminate / veneer / lacquer / melamine Shape: rectangular, without grooves or holes Roughness: average < 5 µm, maximum < 35 µm Working temperature of components: < 50 °C Minimum density: chipboard > 650 kg/m³, MDF > 750 kg/m³ FEEDER / STACKER WINNER W1 Panel length: min. 300 mm Panel width: min. 240 mm (double row: min. 120+120 mm), max. 1200 mm (double row: max. 600+600 mm) Panel thickness: 10–60 mm Panel weight: up to 100 kg Panel flatness: ±1 mm/m (max. ±2 mm over the entire length) Kdsdpfow R Savjx Ab Teh Height of uniform stack on the conveyor (H=250 mm): min. 300 mm, max. 1500 mm High-speed unit speeds: Y-axis (carriage) 210 m/min, Z-axis (suction frame) 130 m/min (+ productivity ~2 cycles/min) Base productivity: 15 cycles/min (depending on composition/weight/gaps) Compressed air consumption: 950 Nl/min Installed power: 16 kW Option: powered panel separator – air 1050 Nl/min, power 8 kW DOUBLE-SIDED EDGE BANDING MACHINES STREAM C SB1 (first pass) Panel overhang beyond the conveyor: 35 mm Panel thickness: 10–60 mm Edge thickness: 0.3–3 mm Edge height: 15–65 mm Table height: 950 mm Panel width: 240–1200 mm (SB1 TWIN: min 100 mm; SB1 SOFT: min 270 mm) SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional equipment) STREAM C SB2 (second pass) Panel overhang beyond the conveyor (fixed): 35 mm (SB2 SOFT: 50 mm) Panel thickness: 10–60 mm Edge thickness: 0.3–3 mm Edge height: 15–65 mm Table height: 950 mm Clamp spacing: 500 mm Panel width: 240–1200 mm (SB2 SOFT: min 270 mm) Panel length: 240–2700 mm SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional tables) GLUING UNIT SP30 Edge thickness: 0.3–3 mm Maximum cutting section of scissors: 135 mm² (3 × 45) Panel thickness: 10–60 mm Edge height: 15–65 mm Minimum edge length: 250 mm Glue tank: 1.3 kg Glue reservoir: 11 kg Application capacity: 16 kg/h Edge roll diameter: 800 mm EDGE CUTTING LENGTH CONTROL (options) EC40: minimum length 200 mm, speed 40 m/min, tolerance ±3 mm EC60: minimum length 200 mm, speed 60 m/min, tolerance ±5 mm TURNER ROTARY UNITS PT1 / PT2 Panel length: 300–3200 mm Panel width: 200–1200 mm Panel thickness: 10–80 mm Maximum panel weight: 100 kg Panel flatness tolerance: 1 mm/m Floor flatness tolerance (area 8000 × 3000 mm): ±10 mm Compressed air requirement: 250 L/min Installed power: 7 kW Installation and commissioning are available for an additional fee.

Condition: excellent (used), Here we offer you a used eurokraft computer cabinet. Product description: Sturdy, powder-coated sheet steel construction. Overall dimensions Height x width x depth 1638 x 600 x 350 mm. Housing for flat screen, lockable. Acrylic glass panel, HxW 420 x 450 mm. Internal dimensions HxWxD 548 x 598 x 330 mm. PC cabinet with side door, lockable. Internal dimensions HxWxD 480 x 570 x 348 mm. Top width x depth 900 x 600 mm, thickness 25 mm, melamine resin-coated. Technical data: Total height 1638 mm Total width 600 mm Total depth 350 mm Internal dimensions of monitor compartment HxWxD 548 x 598 x 330 mm Max. Screen size (TFT) 20 inch Body material Sheet steel, powder-coated Ventilation passively ventilated (wall slots) Protection class IP20 Feature lockable Version with work table Monitor compartment with Worktop dimensions 25 x 900 x 600 mm Weight 44 kg Product type Computer cabinets Body color blue-grey RAL 7031 Kodoqa Dd Aepfx Ab Tjdh Type: Computer cabinet eurokraft basicCondition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, total height: 1,000 mm, total length: 1,750 mm, total width: 800 mm, overall weight: 60 kg, space requirement height: 1,000 mm, space requirement length: 1,750 mm, space requirement width: 800 mm, No. 3253 Edge banding machine Sudhoff V 30 Used For with hot melt adhesive pre-coated edges made of PVC, ABS, melamine or wood Workpiece thickness 10 - 55 mm Edge thickness 0.4 - 1.0 mm Automatic edge transport Automatic cutting of the rear edges Edge trimming for flush cutting Electromagnetic cutting station for the front edge Hot air blower with 3 kW power Kodsx Il Ayopfx Ab Tedh Heating infinitely variable Automatic belt feed 7 m/min Transport dimensions approx. 1750 x 800 x 1000 mm LWH Weight approx. 60 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance Z-axis: 500 mm, Rondcom 54-SD3 / ACCTEE PRO Form tester on a steel device base, including an air-bearing, high-precision CNC rotary table and motorized Z-column (Z=500mm), consisting of: Measuring unit E-RT-R531A Detector holder E-DT-R749A Stylus arm EM46000-S302 (diameter 1.6mm) Detector E-DT-R120A Interface controller PCB for PC operation ACCTee PRO roundness base software under MS WIN XP/7 Calibration sphere E-MG-R01A (roundness 0.05 μm) Tool set/gauge block set with factory certificate (1.47mm and 1.49mm) Fuse (1A), user manual, device inspection certificate CNC probe holder with offset height H=153 mm; offset depth T=65 mm; suitable for R44/54 SD/DX with detector E-DT-R120A Accretech description: E-DH-R770B Z220 HP Workstation G1 - HP Single Unit (CMT) Packaging - HP Z220 CMT 400W 90% Efficient Chassis - Windows 7 Prof. 32/64bit OS - Intel Core i3-2120 3.3 3M 2C GT1 CPU - 4GB DDR3-1600 ECC (2x2GB) RAM - 500GB 7200 RPM SATA 6G 2nd HDD - ATI V4800, 1 GB RAM - Network connectivity - 16X SuperMulti DVDRW SATA 1st ODD 29-piece Stylus Set for Rondcom Kdsdpfx Aox Sckpob Toh Three-jaw chuck E-WJ-R01C FX Base Frame Comfort Version Rondcom 44/54 Table dimensions 1076x1076x810mm consisting of: Closed base frame with 4 mounting points for air springs, Steel substructure, RAL 7035 color Integrated granite plate 1000x630x100mm All wooden elements melamine resin-coated, graphite black 3x side and rear cover plates 1x large wooden shelf with square cutout + 1x insert shelf Intermediate floor wood 2x front doors wood + additional adapter plates for higher load-carrying capacity due to heavy Z-column 1x monitor holder with column and folding arm Integrated air spring system 4x BiAir 0.25-ED-LT membrane air springs (vertical natural frequency approx. 2.5Hz) Load capacity at 6 bar: 170 kg 4x GDR 0.25-LT 1x mechanical-pneumatic level control MPN-LCV, reset accuracy ±0.1 mm 1x compressed air maintenance unit WFD-M 4x leveling elements BNRS 70/4 (leveling range 750mm +/-30mm possible) 4x M16 x 100 mm leveling screws 1x complete assembly of wooden cladding elements

Condition: good (used), Bosch Rexroth Aluminum Profile Workstation Bosch Rexroth Aluminum Profile Complete plastic glazing 4 cm worktop with a light gray melamine resin direct coating Kdsdpfx Abjqbq E Es Tjh 190 x 90 cm Workstation dimensions W x D x H 195 x 93 x 220 cm Magnifying lamp 8062D2 More new and used items - find them in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material Kjdpsd R U Agofx Ab Tedh →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surf

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" Kdjdpfecr U Urex Ab Toh And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness Ksdpol Rix Nefx Ab Tsdh →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm Kdodpfx Abod R U Acj Tjh →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Kdsdpfxsd R U Ads Ab Tjh Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass Kedpfsxzb Iijx Ab Tedh • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: good (used), Year of construction: 2020, machine/vehicle number: 020313L, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Kodjxn Hzbepfx Ab Tedh Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues Kjdpegipk Aofx Ab Tjdh overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: good (used), Code: 0680 Brand: BIESSE Model: AKRON 430/AT - CE Standard Automatic edge bander with grinding unit for edgebanding solid wood, chipboard, veneer, Pvc, Abs and melamine panels - CE Standard - Year 2009 Technical data: Panel height mm 10/60 Edge thickness max mm 10 Panel length min mm 140 Panel width min mm 85 Belt feed speed 12 mt/min Electronic control panel with USB port for data loading - Sintra software Grinding unit for panel grinding -N° 2 motors each Hp 2,4 rpm 12000 Tools diameter mm 80 F30 H75 Slide copying devices N° 2 suction nozzles diameter mm 60 Gluing unit Interchangeable glue pot Glue pot capacity kg 2 Glue spreader roller diameter mm 25 Pressure roller conveyor large roller diameter 100 mm Pressure roller conveyor small rollers diameter mm 80 End cutting unit: for cutting excess front and rear edges N° 2 motors each Hp 1,07 12000 rpm Motor inclination 0-15 degrees Max tooling mm 140 Slide copying devices N° 2 suction nozzles diameter mm 80 Finishing trimming unit for chamfering the excess edge in the top and bottom corners of the panel N° 2 motors each 0,87 Hp 12000 rpm Motor inclination from 0 to 25 degrees Tool diameter 70 mm F16 height 20 mm Vertical and frontal copying devices with rotating discs Height adjustment: automatic with the upper pressure unit N° 2 suction nozzles diameter mm 80 Edge scraper unit for edge finishing in Abs Radial plate tool Vertical and frontal copyng devices with rotating discs N° 2 suction nozzles diameter mm 60 Glue scraper unit for removing glue residues Vertical copying devices with rotating discs N° 2 suction nozzles diameter mm 60 Removable support for panel support N° 5 suction nozzles diameter 100 mm Compressed air bar 7 Overall dimensions mm 3900 x 1000 x 1600 h Weight kg 1530 Kdsdpfjxn Nwrjx Ab Toh

Condition: good (used), Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Kdjdpfxovw Uf De Ab Tjh Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: good (used), Code: 0473 Brand: SCM Model: OLIMPIC K 500 T/ER-2 - Norme CE Automatic edge bander with grinding unit for wood, veneer, pvc, melamine, abs edges, for furniture, joinery, custom furnishings, panels, kitchens, bathroom furniture and various - CE Standard Features: Min/max panel height mm 8/60 Panel height with Round group mm 10/45 Edge thickness mm 0,4/8 Roll edge thickness mm 0,4/3 Min panel width mm 55 Feed speed mt/min 11 Presser with motorized vertical adjustment Panel support shoulder Soundproof protection booth Incoming liquids Kdodevkdtwjpfx Ab Teh Composition: Anti-adhesive unit consisting of two nozzles for spray application of the liquid - Two containers with anti-adhesive release liquid Grinding unit with 2 high-frequency motors - Diamond tools H64 MM - Diameter mm 100 F 30 h 65 - Copying kit for grinding unit Gluing unit VC 560 for edge application on panels up to 60 mm - Glue pot capacity kg 1,5 - Interchangeable pot End cutting unit - 2 independent motors each Kw 0,35 at 12000 rpm - Motor inclination from 0° to 15° - N° 2 blades diameter mm 115 - Front copiers Tilting Trimming Bevelling unit - to remove top and bottom excess edge - N° 2 motors Kw 0,55 - 12000 rpm - Inclination from 0° to 25° - Kit 2 pneumatic positions for quick change of processing from thin edges to radius edges Rounding unit with 2 motors sliding on prismatic guides - It performs both rounding and trimming of thin and thick edges - N° 2 motors each 0,55 Kw - 12000 rpm Edge Scraping unit for optimal finishing of Abs/Pvc edge complete with rotating copiers and suction hoods with chip collection box Glue Scraping unit - for removing glue residue from the bottom and top surfaces of panels Brush unit for perfect cleaning and polishing of the plastic material edge - Motor each Kw 0,25 - Brush diameter mm 150 Phon unit for Pvc/Abs edges Compressed air 7 bar Overall dimensions mm 5500 x 1150 x 1550 h Weight kg 1780

Condition: good (used), Code: 0015 Brand: FRAVOL - ITALY Model: RAPID RX 700 - CE Standard Automatic electronic edge bander for EVA - PUR - POLYURETHANE glue, with grinding unit for applying Pvc, Abs , melamine , veneer , solid strip and roll edges, for joinery workshops, custom furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Panel thickness min/max mm 10/120 Panel length min mm 140 Panel width min mm 60 Edge thickness mm 0,4 - 16 Variable feed 10-20 mt/min Automatic presser lift Composition: Touch Screen electronic control 10,7" colour Controlled axis infeed guide Group 2 incoming grinders for perfect panel grinding - Motors Kw 2,2 - Rpm 6000 - Diamond tools mm 100 x 120 x 30 Infrared lamp 0-600 degrees - Watt 600 Cooling anti-adhesive spray system Edge height mm 120 Automatic edge loader Universal gluing unit with pre-melting unit for polyurethane glue and EVA glue - Quick release glue pot - Controlled axis pressers Roll edge cutting 3 mm Pvc/Abs Glue pot cleaning table End cutting unit with 2 tilting motors each 0,50 kW - 12000 rpm Tilting trimming unit with controlled axis - Motors Kw 1,1 - Rpm 12000 Rounding unit with 2 motors with controlled axis - Motors Kw 0,22 - Rpm 12000 Scraping unit with controlled axis Glue scraping unit Brush unit - Motors 0,18 Kw - Rpm 1400 Ksdpfovutm Ijx Ab Tjdh Dryer unit 0-600° - 4000 watt Soundproof booth Fixed panel support roller conveyor Suction n° 7 inlets diameter 80 - N° 1 inlet diameter 120 Installed power Kw 22 Compressed air 6 bar Overall dimensions mm 6730 x 1500 x 1910 h Weight kg 2400

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with sanding unit for wooden, veneer, PVC, melamine, ABS edges – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchens, bathroom furniture, and various other applications Technical specifications: Kjdpfxoxnvr As Ab Todh Min./max. panel height: 8–60 mm Panel height with corner rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness from coil: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Pressure beam with motorized vertical movement Panel support rail Sound-insulated safety enclosure Fluid inlets Components: Anti-adhesive spraying unit with two nozzles – two tanks for anti-adhesion liquid Pre-milling units with two high-frequency motors – H64 mm diamond tools – diameter 100 mm, bore 30 mm, height 65 mm – copying set Gluing unit VC 560 for edge application on panels up to 60 mm – glue pot capacity: 1.5 kg – exchangeable glue pot End trimming unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, diameter 115 mm – front copying devices Tilting trimming/bevelling unit for removing top and bottom edge overhang – 2 motors at 0.55 kW – 12,000 rpm – tilt range from 0° to 25° – two-position pneumatic set for quick change between thin or radius edges Corner rounding unit with two motors on prismatic guides – for rounding and trimming thin or thick edges – 2 motors at 0.55 kW – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edges with rotary copying and extraction hood, scrap collection cassette Glue scraping unit – removes glue residues from the lower and upper panel surfaces Buffing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg Recently serviced New diamond pre-millers New copying wheels...

Condition: ready for operation (used), Technical characteristics Panel width : 240 mm to 1200 mm Panel length : 240 mm to 3000 mm Panel thickness : 10 mm to 60 mm Band thickness : 0,3 mm to 3 mm Pin inner axis : 500 mm ENTRY / EXIT : Transfer realised with special chains covered in stainless long lasting rubber Entry pivoting guides adjustable depending on panel type Closing device on above pressor to assure the pressing of the panel against the pins Delaying device in entry for optimization of different width panel dimensions Single part rigid structural longitudinal chassis ADVANCE CHAIN : Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level Chain pin inner axis 500 mm BELT PRESSOR SOUNDPROOF CABINS All machining groups inside the machine are surrounded by soundproof material Internal lighting CN command placed at entry of the machine, fixed chassis side NUMERICAL CONTROL Video interface Positioning axis control Chain advance speed tuning Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management Sequenced motor startup Possibility of connection to a barcode reader Module NC410 MILLING GROUP Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm Motor power : 5.8 kW Tool Ø : 200 mm DOUBLE SUPERPOSED SPLINTERS Kjdpfjtrihvox Ab Tsdh Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal Cast iron bearing structure Tool speed rotation : 6000 rpm Motor power : 5.8 kW Tool Ø : 205 to 250 mm EXTENSION MACHINE to 3200 mm AUTOMATIC CENTRAL SUPPORT 10.5 This device allows support of parts that due to their dimensions or thickness can subdue central bending Fully automatic activation GLUING GROUP SP3 Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue Independent Teflon covered changeable glue tank Glue level sensor inside the tank Glue input roller speed synchronized with the chain advance Breveted pre fusion device Glue granule container (8kg) Band presence detection device Automatic band changing procedure 6 POSITION MOBILE BAND CHARGERS END CUTTING End cutting unit for edge thicknesses up to 3 mm Device for quick removal in stroke Automatic exclusion of the unit when the motors are stopped Speed : 12000 rpm Panel projection : 35 mm Edge thickness : 0.3 to 3 mm Panel thickness : 10 to 60 mm Interval between 2 consecutive panels : 350 mm WHOLESALE TRIMMING UNIT 2 superimposed motors with horizontal axis Automatic pneumatic exclusion of the group Speed : 12000 rpm Motor power : 1.3 + 1.3 kw Panel thickness : 10 to 60 mm Tool diameter : 80 mm ANGLE TRIMMING GROUP The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops The in-line stops are automatically selected by the control Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool Tools are equipped with 20° chamfer and 1.5-2-3 mm radius Speed : 12000 rpm Motor power : 0.65 + 0.65 kw Panel thickness : 10 to 60 mm TOP / BOTTOM ROUNDING GROUP Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel Quick release system of the motor-holder groups Automatic exclusion of the tool with stopped motors Tool rotation speed : 12000 rpm Motor power : 0.3 kw

Condition: ready for operation (used), Technical characteristics motorized scraper edge length cut Kjdetriiaepfx Ab Tedh workpiece height max: 65 mm - min 11 mm max temperature setting 400 ° C feed speed 4m / min quick settings easy to use without compressed air for pre-glued PVC, melamine and polyester Power and Motors Voltage: 220 V Overall dimensions

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Ksdpfx Aow I U Dreb Tsdh Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim