Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
compressive force 250 tons outreach 360 mm Ctznycslm stroke 500 mm biggest distance between ram and table 800 mm ram speed as of 100 mm/sec max. ram speed to 200 mm/sec max. ram surface 750 x 450 mm table surface 900 x 630 mm table height 800 mm outlet in the table 350 mm T-slots width 32 mm operating pressure 200 bar two-hand operation with foot switch electrical data 380V /20,5 KW space requirements height - 3,600 x width - 1,250 x depth - 2,050 mm weight approx. 8,000 kg   more
1
table surface area 1000x1000 mm stroke 300 mm throat 450 mm distance table/blankh.,max. stroke up,adjustm. up 580 mm die cushion capacity 20 t die cushion stroke 300 mm feed down 400 mm/sec feed up 400 mm/sec table height 1350 mm surface of drawing cushion durchmesser 350 mm total power requirement 55+11 kW weight of the machine ca. 19,5 t dimensions of the machine ca. 1,5x3,5x4,6 m pressure 160 t mech. Counter, two-hand control, blankloader + gripper feeder - SPA with oilhydr. Drive hydr. an... more
6
pressure: 200 t stroke: 500 mm throat: 420 mm daylight dimension with clamping plate Slide/ up: 720 mm daylight dimension with clamping plate Slide/ low: 220 mm table surface area: 1050 x 800 mm die cushion hydr. pressure/stroke: 63t / 120mm clamping plate on table: 1030 x 800 x 100 mm surface area of ram: 1030x630 mm Lqzib total power requirement: 59 kW weight of the machine ca.: ca. 22 t space requirements of the machine approx.: L:2,77 x B:1,48 x H:4,72 m dimensions electric cabinet LxWxH: c... more
5
with sick light barrier, with cushion in table, with ejector, with hydraulic clamoing device with automatic lubrication systemPressure 250 tCushion in table 80 tEjector in ram 5 tThroat 430 mmStroke 300 mmCushion stroke 100 mmEjector stroke 75 mmDaylight 500 mmTable surface area 1.100 x 850 mmTable height over floor 950 mmApproach speed 330 mm/sWorking speed 11 - 30 mm/sReturn speed 330 mm/sRequired power ca. 37 kWTotal power ca. 40 kWOil volumne ca. 1.400 lDimensions 3.200 x 2.500 x 4.250 mmWei... more
6
Hydraulic press  Manufacturer: DIEFFENBACHER  Type: DT II 250 / 80 Iif0eueo  Year: 1981 • Operating pressure: 280 bar  Hub: 630 mm  Piston: ø 225 / ø 240 mm  Installation height: 1,000 mm  Retraction force: 350 KN  Table area: 2,200 x 800 mm  Pressing force: 2,500 KN  ejector force: 450 KN  Retraction force: 350 KN  Pull cushion stroke: 120 mm  Control pressure: 50 bar  Weight: 28,000 kg more
6
pressure: 160 t throat: 360 mm distance table/ram: max. 800 mm max. ram stroke: 500 mm ram speed - reverse: 125 m/s ram speed - forward: 200 m/s table clamping surface:: B:900xT:620xØ 100 Tprp038q0 height over floor: 990 mm surface area of ram: T:450xB:750 mm mortise hole in ram: Ø 49 mm operating pressure: 16 Mpa total power requirement: 7,5 kW weight of the machine ca.: ca. 8,5 t space requirement approx.:: L:2,0xB:0,95xH:3,70 m On the press the stroke limit is 3 times adjustable. with ejecto... more
6
Hydraulic press Manufacturer: Müller Esslingen Type: CR 630 Year of construction: 1969 / UVV: 1993 2w0wspche Pressing force: 6,300 KN Piston stroke: 900 mm Operating pressure Plunger: 250 bar Number of cylinders: 2 PCs Table area: 2,000 x 1.600 mm Installation height: 1,600 mm Height above floor: 5.630 mm Depth of floor: 1,600 mm Quantity of oil: ~ 1,600 liters Cushions: 2,500 KN Drawing cushion stroke: 400 mm Operating pressure Cushions: 320 bar Weight: 85,000 kg Extras: m... more
2
pressure: 200 t throat: 420 mm stroke: 500 mm daylight dimension : table/slide up: 720 mm daylight dimension : table/slide low: 220 mm S8v3l8nog clamping plate on table: 1030 x 800 x 100 mm table surface area: 1050 x 800 mm die cushion hydr. pressure/stroke: 63t / 120mm surface area of ram: 1030x630 mm total power requirement: 59 kW weight of the machine ca.: ca. 22 t space requirement approx.:: L:2,77 x B:1,48 x H:4,72 m dimensions electric cabinet LxWxH: ca. 1,5x0,5x2,3 m E-cabinet 002-1 N... more
4
pressure: 200 t throat: 420 mm stroke: 500 mm Lqzkh daylight dimension : table/slide up: 720 mm daylight dimension : table/slide low: 220 mm table surface area: 1050 x 800 mm clamping plate on table: 1030 x 800 x 100 mm die cushion hydr. pressure/stroke: 63t / 120mm surface area of ram: 1030x630 mm total power requirement: 59 kW weight of the machine ca.: ca. 22t t space requirement approx.:: L:2,77 x B:1,48 x H:4,72 m E-cabinet 001-3 Nr. 244 16 more
4
pressure 160 t Eswjqsyvo stroke 200 mm table surface area 1000 x 775 mm throat 400 mm distance table/ram max. 500 mm ram surface 900 x 670 mm tool hole in ram 60 mm table hole 250/220 mm total power requirement 18,5 kW weight of the machine ca. 10 t more


Hydr. pres...
every day

New machines via email!

Be informed!
4
Hydraulic single change press serial. WMW ZEULENRODA PYE type 160 S 1 Uspliyo2x Masch.# 057-007/38 built in 1974 Technical data: maximum press power 160 t Retraction force 34 t Piston stroke 500 mm Throat depth 360 mm Height 800 mm Speed from 0.2 m / min. Speed on 0.125 m / min. Middle. Working speed 92 mm / s Speed on 125 mm / s Table size 900 x 630 mm Bear size 750 x 450 mm Table height 800 mm Operating pressure 160 kp / cm ³ Power 17 kW Dimensions L x W x H 1250 x 2200 x 3... more
5
GO 2001 Control system: Siemens MPI OP7 Bnpuqube Pressing force: : 250 t Dimensions of table working surface : 2 200 X 1 200 mm Ram stroke :460 mm Number of ram strokes : 15/30 /min Shutheight : 1 000 mm Ram adjustment : 3 00 mm Engine power : 75 kW Maximum: tool weight :62 000 kg more
6
pressure 250 t throat 360 mm stroke 500 mm dayligth 800 mm table height 1000 mm ram surface 850x500 mm table surface area 1250x650 mm tool hole in ram Ø 65 mm hole in the table Ø 200 mm rapid traverse 450 mm/min working feed 11 mm/sec total power requirement 45 kW weight of the machine ca. 15 t dimensions of the machine ca. 2100x3000x4200 mm 9biqzf39f more
5
Ageo tool try press Distance between columns: 850mm Height 100 mm -maximum piston stroke 500 mm Nominal force 1250kn = approx. 127 tons Clamping surface length: 850 mm / width: 750 mm Baoswsv7bf -T-slot DIN 650 / number 4 / keyway width 22 mm / Groove distance: 400 mm -with pivot clamp -Weight: 5 tons Height approx. 290cm Depth 95cm Width 130cm Press works fine, only when the return stroke the press not alone creates the entire way, probably what will be fixed at the throttle, t... more
6
88ayz2ltbShip building presses Make: Gorter 150 ton Capacity: 150 ton Stroke cilinder: 400 mm Table: 1.000 x 500 mm Deep troath: 1040 mm Machine weight: +/- 10.000 kg Machine dimensions: 3.100 x 1.400 x 4.000 mm With table and presettable (500 x 1.000 mm) Stock Number: pers331 more
6
Hydraulic single change press serial. WMW ZEULENRODA type PYXE 250 S Fabr. # 092-001/1, built in 1964 with cushions Technical data: Flow NennPresskraft 250 t Table size 1600 x 660 mm Operating pressure 200 at speed 0,160 m / sec Return plunger force 50 MP Operating pressure 200 at speed 0.100 m / sec. Piston stroke 500 mm Gr. Distance between table and RAM 1000 mm RAM size 1200 x 645 mm Diarrhea opening in the table 250 mm Ejector force 100 MP Operating pressure 200 at stroke 320 ... more
5
Pressing force:250 t Throat depth:420 mm Slide stroke: 500 mm Operating voltage: 86 kW Operating voltage: 380 voltage Gu3cok Table area: 1110 x 750 mm Machine weight: 19000 kg more
1
KOBELCO Hydraulic Press Jsup2997 - 5 000 t Bolster : 3 500 mm × 4 000 mm Estimatet price loaded aproximativ 1 600 000,00 USD Dear Sirs, We are pleased to offer to you for Used hydraulic press in good condition. Please refer to the details of it as below. Kobelco Hydraulic Press 5000Ton Kobelco Hydraulic Press 5000Ton Make : KOBELCO Capacity : 5000ton L×W×H : 8,000mm×5,000mm×10,500mm Stroke : 3500mm Bolster : 3500mm×4000mm Daylight : 4000mm Descending Speed : 700mm/sec Pressing Sp... more
2
Nominal press force 2500 KN with conversion to the latest accident prevention regulations -new electrical, new Cabinet, -hydr. Press safety block -Light curtain with Salim. Protection grid -new cylinder seals -new color scheme Plunger speed rapid stroke downward approx. 200 mm / s Plunger speed up approx. 125 mm / s Adjustable stroke 500 mm RADIUS (distance cylindrical-axis z.Brustplatte) 360 mm Distance table and slide plate, tappet above 800 mm Table width x depth of the table (ap... more
5
Pressing force: 400 tons / bending length: 4'000 mm 7ivdioqrb The original control Cybelec DNC94Ps was replaced about 3 years ago with a Cybelec 884S (€ 18' 000.00) press works flawlessly including various accessories more
6
Machine after general review. 8whgvxeju parameters: Maximum presses force 250 tons. Working pressure 20 MPa. Top table 700 x 450 mm. Bottom table 900 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Speed down 110 mm / sec. Speed up 200 mm / sec. Power requirement 20.5 kW. Weight 8 tons. Price 91,500.00 Net. Price 112.545,00 Gross. Condition of the machine good. It is possible to inspect and inspect the machine in motion. more
4
Hydr. Once change press serial. MAE type S RH 160 Technical data: Max pressure 160 t Throat depth 360 mm Stroke 500 mm Druckkolbendrm. 280 mm 22 kW Weight approx. 10 t Dimensions approx. 1800 x 1400 x 3000 mm with -with Horn dimensions: 720 lang, 570 x 570 mm side length with 1 T-slot on top used, in good condition L23wn more
2
Hydraulik press BOLDRINI POCC 300T yom 1971 7ggqrnarl For more information please contact us. more
3
Hydraulic single column-wide table press serial. MENGELE type E 200/2500 Masch. # 10213 year 1979 Technical data: maximum pressing force 200 t Table dimensions 1500 x 700 mm Durchfalloch in the table 150 mm Bear size 1500 x 600 mm MOT. Tappet adjustment 280 mm Stroke adjustment 180 mm Operating pressure 250 bar Height 600 mm Stroke 200 mm RADIUS edge table 930 mm Projection Center table 550 mm Slide down / empty 74 mm / s Presses up to 80 t 35 / s Presses up to 120 m 23 / s Pr... more
4
pressure 150 t stroke 500 mm table: 1000 - 800 feed down 150 -280 mm/sec feed under pressure 10 - 26 mm/sec feed up 180 - 300 mm/sec total power requirement 22 kW weight of the machine ca. 7 t dimensions of the machine ca. m 3myfmqbe2 more


Hydr. pres...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close