Used Hydraulic Straightening Press for sale (26,920)

Condition: good (used), functionality: fully functional, Robust hydraulic press, type HES 16MP, manufactured by Hydraulische Pressen und Maschinenbau GmbH (HYPREMA). Dkodpfjumk Nasx Ak Aow Depending on the tooling and permissible load, the machine is suitable for typical pressing and straightening operations, such as aligning, pressing in, and pressing out components. The model designation HES 16MP indicates a nominal pressing force of approximately 16 tons. The installed pressure gauge has a display range up to 25 MPa (25 tons). Model: 7092513 Type: HES16MP General: - Pressure gauge display, pressing force: 0–25 MPa (0–25 tons) - Pressure gauge display, hydraulic pressure: 0–400 kp/cm² (approx. 0–392 bar) - Design: Hydraulic single-column press - Operation: Hand lever actuation

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 1,500 mm, overall weight: 1,145 kg, No minimum price – guaranteed sale to the highest bidder! The press is in new condition and has not yet been used! TECHNICAL DETAILS Press force: 100 t Stroke: max. 380 mm Table width: 1,500 mm Height adjustment: 1,000 mm Ram speed: 10 mm/s Column spacing: 1,500 mm MACHINE DETAILS Press type: Single-acting Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 2,100 mm Net weight: 1,145 kg Number of transport packages: 1 Dkodpfx Aj Af Hd Uok Aow EQUIPMENT CE marking CE certificate Documentation

Condition: good (used), Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Max. pressing force: 130 t Table size (bottom): 800 x 500 mm with T-slots Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 AC, 24 DC Dsdpfx Akezkg Igj Aokw Control system renewed 5 years ago The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. A throttle valve is installed on the hydraulic unit to adjust the pressure.

Condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Profi Press: Portal presses, straightening presses, and other custom-made hydraulic presses for large and specialized projects. *Do you have a large workpiece or a specific pressing application? We build the press to meet your requirements.* RHTC supplies custom-made hydraulic portal presses/straightening presses for processing large and heavy workpieces. From an extra-long work table (recently delivered a 200-ton model with a 5000 x 4500 mm table size) to multiple portals and cylinders: we discuss your application and, together with you, develop a suitable design. Dkedpfx Akj Ah El So Aew *Custom-made solutions for your product and process.* Depending on the application, we can customize, among other things: - Press force and table dimensions - Working width, free working height, and cylinder stroke - Number of portals and cylinders - Manual or motorized movement of portal and cylinder - Hydraulics, electrical design, and controls - Software for setting and storing various parameters In this way, we tailor the machine to the dimensions of your product, the required process, and the way you want to work. *From a special portal press to a larger industrial project* Our realized projects include portal presses with long and wide work tables, designs with two portals and two cylinders, and presses for pressing large shafts out of gearboxes. Even with extensive custom-made projects, the design starts with your application. We discuss the requirements, develop the design, and submit the technical drawings for your approval before production begins. *Customization across our entire machine range* Our capabilities extend beyond portal presses. You can also request custom-made solutions for other types of hydraulic presses, from small to large, from our range. We assess each project to determine which modifications are technically feasible and appropriate. This includes hydraulic workshop presses with a wider working width (including a sliding cylinder), C-frame presses for performing tests in a laboratory, production presses for compacting powder, arch presses for shipbuilding, and four-column presses for very precise pressing operations. *Discuss your project with RHTC* Send us your application, workpiece dimensions, and desired press force via the contact request in this advertisement, if known. If possible, include a drawing or photo. This will allow us to assess your request and discuss a suitable design and quote. You can also submit your request via the contact form on the RHTC website. The photos show examples of realized custom-made solutions. The design and specifications offered are determined per project.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW Dkedpfxo Ad H Ttj Ak Asw MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Dsdpezb Il Nsfx Ak Askw Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 100 t Machine weight: approx. 5.7 t Stroke and operating data Stroke: 0–500 mm Overhang: 310 mm Installation height: 1,130 mm The installation height is specified with the stroke in the upper position. Table and ram Table surface: 800 × 650 mm Ram surface: 800 × 600 mm Through-hole in the table: 355 mm Table height above the floor: 800 mm Dkodpfo Acgcfjx Ak Ajw Safety data Safety distance: 270 mm Follow-up measurement: 135 m/s Follow-up travel: 44 mm Dimensions Length: approx. 1.2 m Width: approx. 2.0 m Height: approx. 3.67 m EQUIPMENT Conversion to comply with new safety regulations

Condition: used, Year of construction: 1976, machine/vehicle number: 8841, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Dsdps Aa Nynjfx Ak Aekw Pressing force: 25 t Pulling force: 10 t Total power requirement: 11 kW Machine weight: approx. 3 t Stroke and working data Overhang: 260 mm Stroke: 500 mm Pulling stroke: 200 mm Table Table size: 500 × 500 mm Dimensions Space requirement: approx. 1.40 × 1.10 × 2.80 m EQUIPMENT Very robust design Two-hand operation Analog pressure gauge

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Dkjded Swtaopfx Ak Aew Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Dksdpfx Ajzh Edbek Asw Technical data: - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm - traversing carriage with mounts on the straightening table - pointed die holder - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Exner Type: HA SP-340 SS Year of manufacture: 1968 Machine number: 1 PRESS DATA Press force: approx. 34 t Dkjdpfj Adu Ulsx Ak Aew Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 8,000 kg

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg Dkjdpfx Akovgu Haj Aow

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,200 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 970 kg Price: On request Dkedpfx Akj Aacybj Aew - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram width [mm]: 120 - Throat depth [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1000 - Transport dimensions: 1200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 540 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 60 - Max. stroke [mm]: 380 Dkjdpfx Aoz U U Dpek Asw - Table length [mm]: 1000 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Pressing speed [mm/s]: 10 - Options: Verplaatsbare cilinder - Column spacing width [mm]: 750 - Transport dimensions: 1200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Press brake Condition: good Performance Data Dksdo Aa Aanopfx Ak Aow Pressing force: 80 t Bending length: 2,505 mm Frame width: 2,200 mm Total power consumption: 7.3 kVA Machine weight: approx. 5.6 t Control System Control: AMADA-MELDAS NC 9 F Controlled axes: 7 Dimensions Space requirement: approx. 3 × 2.25 × 2.20 m EQUIPMENT Detailed machine documentation available

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Dodjdzqptjpfx Ak Aekw Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Dkodpfxoz Snrnj Ak Ajw Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: used, Year of construction: 2015, machine/vehicle number: 1606.18, functionality: fully functional, pressing force: 163 t, stroke length: 700 mm, table width: 2,000 mm, table length: 1,400 mm, table height: 800 mm, total length: 2,400 mm, total width: 3,200 mm, total height: 5,200 mm, overall weight: 28,000 kg, Equipment: documentation/manual, Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm For sale is a hydraulic 4-column press from the manufacturer HYMAG with a maximum pressing force of 163 T. The machine has a table size of 2,000 × 1,400 mm, an open height of 1,300 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, inserting, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-Column Press – 163 T – 2,000 × 1,400 mm ==== General Information - Manufacturer: HYMAG - Type: Hydraulic 4-Column Press - Model: HS 4 160-K3 - Machine Number: 1606.18 - Year of Construction: 2015 - Pressing Force: 163 T - Rated Force: 1,600 kN - Table Size (Working Area): 2,000 × 1,400 mm - Ram Plate Size: 2,000 × 1,400 mm - Table Height: 800 mm - Open Height: 1,300 mm - Stroke: 700 mm - Front Clearance: 2,010 mm - Side Clearance: 900 mm - Overall Height: 5,200 mm - Overall Width: 3,200 mm - Overall Depth: 2,400 mm - Total Weight: 28 T - Basement Required: No ==== Hydraulic Cylinder - Max. Working Pressure: 305 bar - Return Speed Downwards: 220 mm/s Dkedpfjzq Apgjx Ak Aow - Return Speed Upwards: 150 mm/s - Initial Pressing Speed: 45 mm/s ==== Hydraulics & Drive - Main Motor: 55 kW - Additional Hydraulics: 7.5 kW - Auxiliary Motor: 7.5 kW - Cooling Motor: 1.5 kW - Oil Tank: 600 l - Drive Type Pump (Drive I): V30D115RKN - Drive Type Additional Hydraulics (Drive II): PGH3-2X/016 - Cooler Type: TFS/A-20-400 ==== Tooling - T-Slots: M20 according to DIN 650 ==== Control System - Valve Voltage: 24 V ==== Safety - Shear Pad Dampening - Maintenance Platform - Follow-Up Travel: 17 mm - Follow-Up Time: 90 ms - Safety Distance: 180 mm ==== Electrical Connection - Operating Voltage: 400 V - Main Motor Current Draw: 98 A - Auxiliary Motor Voltage: 400 V - Auxiliary Motor Current Draw: 15 A - Cooling Motor Voltage: 400 V - Cooling Motor Current Draw: 4 A ##### Application Areas: Forming, deep drawing, straightening, inserting, embossing, assembly work, toolmaking, mold making, mechanical engineering, metalworking, contract manufacturing, series production (Hydraulic 4-Column Press, 4-Column Press, Hydraulic Press, HYMAG, HYMAG HS 4 160-K3, 163 T Press, 163 Ton Press, Forming Press, Deep Drawing Press, Straightening Press, Inserting Press, Assembly Press, Industrial Press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which builds upon these. Our core strength is in the design and construction of custom machinery and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Pressing force: 40 t Drawing cushion force: 40 t WORK TABLE Table dimensions: 700 × 630 mm Number of table slots: 3 MACHINE DETAILS Manufacturer: LAUFFER Machine type: Hydraulic press Length: 1,000 mm Width: 800 mm Height: 2,500 mm Djdpfx Aks Ad Hq Ss Askw Weight: 10,000 kg

Condition: good (used), Year of construction: 1972, functionality: fully functional, Drawing slide force: approx. 800 Mp Blank holder force (die cushion): 320 Mp Drawing slide stroke: 900 mm Dkjdpfo Ah Squex Ak Ajw Blank holder stroke (die cushion): 400 mm Maximum distance between table and slide: 1920 mm Table size: 3200 x 2000 mm Clear opening on the loading side: 3250 mm Table height above floor level: 400 mm Overall height above floor level: 6300 mm Drive power: 100 hp Machine weight: 153 tons

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc) Dksdpstndu Uefx Ak Ajw

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: Foot pedals and push buttons on the control panel -Pressing force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electric unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with foot: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (cross member): 245 mm -Cross member adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross member via hand crank (no manual lifting required) -Hydraulic unit can be moved sideways: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 pressure dies with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm Djdsztfbwjpfx Ak Askw -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure indication via pressure gauge -2 prism supports included in delivery -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 290 kg Errors and omissions excepted.

Condition: used, Year of construction: 1997, machine/vehicle number: 835, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 890 mm, table length: 1,460 mm, table height: 600 mm, total length: 1,800 mm, total width: 2,120 mm, total height: 3,550 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm For sale is an oil-hydraulic 4-column forming machine from August Luigart & Sohn GmbH u. Co. KG with a maximum pressing force of 200 T. The machine has a table size of 1,460 × 890 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it suitable for forming, stamping, straightening, and assembly work in industrial applications. ##### Technical data + Information: Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm ==== General information - Reference ID: TPT-08 - Manufacturer: August Luigart & Sohn GmbH u. Co. KG - Design: Oil-hydraulic 4-column forming machine - Model: 4 SPY 200 SO - Machine number: 835 - Year of construction: 1997 Dksdpe Ad Haysfx Ak Ajw - Pressing force: 200 T - Rated force: 2,000 kN - Table size (working area): 1,460 × 890 mm - Table height: 600 mm - Open height: 800 mm - Installation height: 800 mm - Stroke: 400 mm - Ram width: 1,460 mm - Lateral passage: 450 mm - Total height: 3,550 mm - Total width: 2,120 mm - Total depth: 1,800 mm - Total weight: 12,500 kg - Max. upper tool weight: 2,500 kg ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 300 mm - Piston rod diameter: Ø 270 mm - Guide column diameter: Ø 160 mm - Stroke: 400 mm - Max. working pressure: 285 bar - Return speed downwards: 200 mm/s - Return speed upwards: 251 mm/s - Pressing speed: 37–11 mm/s - Setting speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 32.5 kW - Oil tank: approx. 850 l - Hydraulic oil: HL / HLP ISO VG 46 - Oil filter fineness: < 25 µm - Max. oil temperature: 60 °C - Vibration damper: EFFBE LM 7-100 - Foundation according to manufacturer's specifications required ==== Tooling - Number of T-slots: 5 - T-slots: T22 M20 according to DIN 650 ==== Control - Control: no PLC - Control panel: on the frame - Light curtain / light barrier: available - Two-hand operation: available ==== Safety - Decay time: 82 ms - Decay distance: 164 mm - Safety distance: 13 mm - Protective grid: available - CE-compliant design ==== Electrical connection - Operating voltage: 415 V - Power supply: 3PEN - Frequency: 50 Hz - Conductor cross-section: 25.0 mm² - Fuse rating: 80.0 A - Rated current: 64.2 A - Control voltage: 230 V AC - Valve voltage: 24 V DC ==== Environmental conditions - Ambient temperature: +5 to +40 °C - Relative humidity: 30–95 % (non-condensing) - Installation altitude: max. 1,000 m above sea level - Noise level: < 70 dB(A) ##### Application areas: Forming, stamping, straightening, embedding, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Oil-hydraulic 4-column forming machine, 4-column forming machine, hydraulic press, August Luigart press, 4 SPY 200 SO, 200 T press, 200 ton press, forming press, stamping press, straightening press, embedding press, industrial press)

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate Dkedpfx Akszxcldo Aew CE marking

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Dsdo Aa Ndyjpfx Ak Askw Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter