Used Hydraulic Cold Press for sale (27,365)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, stroke length: 800 mm, ram plate width: 1,200 mm, ram plate length: 2,200 mm, overall weight: 100,000 kg, 2022 Macrodyne 1500T Hydraulic Hot Forging Press. Condition Very Good. Weight 100000 kg. Refer to attachments in the documents sections for more information. Unit available immediately. Buyer responsible for removal, contractor must be licensed and insured. MAXIMUM PRESSING FORCE 15,000 KN USABLE BED BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm USABLE RAM BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm DISTANCE BETWEEN TENSION MEMBERS (L-R) 2400 mm DISTANCE BETWEEN TENSION MEMBERS (F-B X HEIGHT) 750 mm X 1473 mm DAYLIGHT 1400 mm SHUT HEIGHT 600 mm STROKE 800 mm TOP EJECTOR CAPACITY (STATIONS 3 & 4) 750 KN Dcsdpjz Hb T Hjfx Acpen TOP EJECTOR STROKE (STATIONS 3 & 4) 90 mm BOTTOM EJECTOR CAPACITY (STATION 3) 750 KN BOTTOM EJECTOR STROKE 200 mm MAXIMUM PUNCH WEDGE CAPACITY (STATION 4) 6000 KN

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Dedezb Il Nepfx Acpocn Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm Djdpfstndu Usx Acpscn WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Djdpocmat Usfx Acpscn Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Dodpfx Acjz Hcz Sspocn Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Djdpfx Acozxcldspjcn Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Max working width: 880 mm Dcjdpex A Tf Aefx Acpen No of Pressing cylinders: 4 No of Daylights: 1

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools Djdpfeyilh Isx Acpjcn -we bought this maschine as new for 340 000 EUR in year 2019

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Dedpfov Sd S Nsx Acpocn Your ad has been automatically translated. Translation errors are possible.

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Dodpszktg Aofx Acpecn Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Dsdpfou Axfcsx Acpjcn Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Dcedpfxov E Efdj Acpsn Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 650 t, stroke length: 400 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Dedpfjv Hpnlex Acpjcn Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. Dcodpszzd Rgsfx Acpjn The machine is in perfect working order and can be inspected while powered on.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 82225, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 100 t, stroke length: 200 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, table width: 160 mm, throat depth: 250 mm, clearance between the columns: 2,050 mm, oil tank capacity: 200 l, total length: 3,000 mm, total width: 1,700 mm, total height: 2,400 mm, overall weight: 6,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake HACO ERM 25100 Year of manufacture: 2005 100Tx2500 Light barrier: Fiessler AKAS Tool holder: AMADA Promecam Typ A tool holder Backgauge: Controlled X-R-Z1-Z2 axes New 2026 control system! Dedpfxez Er E Ds Acpscn Immediately available! Can be viewed under power!

Condition: good (used), Year of construction: 1991, We are selling our Hydrap 160-ton press. The system is only available for sale as a complete unit. Dsdpfx Acetu Szlepocn Operating hours: 20,242 Condition: good Inspection is possible and welcome. Location: Szügy / Hungary

Condition: ready for operation (used), Year of construction: 2026, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dodpfjztfbwox Acpocn Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Dcsdpfezt H T Isx Acpon Manufacturer: Gantenbein, Switzerland

Condition: used, Year of construction: 1966, Technical details: pressure: 16 t distance between columns: 450 mm stroke: 350 mm total power requirement: 3 kW dimensions of the machine ca.: 1,2 x 0,8 x 2,5 m Dedpfxoz Dgczs Acpecn

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. Djdpsu Nfudofx Acpecn ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 320 mm, operating speed: 35 mm/s, reverse speed: 380 mm/s, table width: 560 mm, table length: 710 mm, table height: 850 mm, throat depth: 320 mm, distance table to ram: 460 mm, oil tank capacity: 365 l, total length: 1,200 mm, total width: 3,200 mm, total height: 2,800 mm, overall weight: 8,500 kg, Oilhydraulic gap press, YOP 1990, control SIEMENS, capacity 100 to, return power 10 to, motor 15 KW, throat depth 320 mm, stroke 320 mm, table size 710 x 560 mm, table bore Ø 110 mm, table high 850 mm, rapid feed, hydr. ejector 20 to, hydr. die cushion 10 to, Hydro strip feed device Keller typ HVP-SIG 2 with control, decoil hauling winch SOPREM, weight ca. 8500 kg Dedpfez Itdtjx Acpocn

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 Dcedpfx Aszry Icscpon - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Dcedpeu Nfq Eefx Acpjn Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Dedpfx Aovbdpyocpecn Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm Dcodpeu Nfmysfx Acpen boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *