Used Hydraulic Cold Press for sale (37,259)

Condition: used, Year of construction: 1979, pressure 10 t throat 250 mm stroke 400 mm feed down 100 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t Iijdowbizyjpfx Agzjk

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 6,000 mm, installation height: 1,000 mm, total width: 2,400 mm, total length: 3,500 mm, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, overall weight: 45,000 kg, oil tank capacity: 1,200 l, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Toolmaking Press for Tool and Forming Technology The machine is a tryout/tool tryout press designed for tooling in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. The press features a robust 4-column design, a spacious working area, and a hydraulic unit equipped with REXROTH pump technology. Control is managed via a SIEMENS S7-1200 with touch panel and extensive parameterization options. Scope of Delivery & Accessories - GÜTHLE tool sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roll stand / support console 10 t (GÜTHLE) - 4-channel tool holder system (length 1500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer documentation Condition of the Machine - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electricals in good condition - Mechanically sound, no visible damage - The machine is assembled and can be demonstrated under power. Press Force: - Rated force: 500 t - Max press force at 250 bar: approx. 510 t Dimensions & Weight: - Overall dimensions (approx.): 3500 × 2400 × 6000 mm - Total weight: approx. 45,000 kg Working Area: - Table size: 2000 × 1500 mm - Internal column spacing: 2000 × 900 mm - Installation height: 1000 mm - Stroke: 800 mm (linearly adjustable via linear measuring system) - T-slots (mounting defined by the customer) Hydraulic System: Main Cylinders: - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary/Plan Cylinders: - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank: - Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min - Hydraulic tank: 1200 L - Oil system: 1000 L capacity Speeds: - Approach stroke: 120 mm/s - Return stroke: 150 mm/s - Working/pressure stroke: 12 mm/s Control & Safety: Control: - SIEMENS S7-1200 + ET200S - 12" touch panel Schneider Electric Operating Modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without die cushion - Deep drawing mode with die cushion Measurement & Safety Features: - Linear measurement system Novatechnik (63 Bit) for slide and die cushion - SICK safety light curtains front and rear (height: 1050 mm) - Side safety fencing with limit switches Isdpfxsx D Tv De Agzjik - Remote maintenance via Ethernet possible - Mobile operator panel International Notice Block (DE/EN) German: Dismantling, deinstallation, loading and transport are exclusively the responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection only after prior appointment. English: Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, pressing force: 630 t, table width: 1,800 mm, table length: 1,600 mm, overall weight: 80,000 kg, Equipment: safety light barrier, Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Iiodpfsv E N Rqex Agzek Possibility to check the machine in operation - The press is still connected to the power supply. Siempelkamp FH 4_1_630T press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2024. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: good (used), Year of construction: 1969, Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press, press machine, hydraulic punch for Schüco tools, hydraulic press, multifunctional punch, punch, universal punch, punching machine Iedjw A Rzdspfx Agzoik -Handover: in the current condition as viewed -Condition: Cylinder slightly leaky -Hydraulic press: Hydraulic single-column press -Pressing force: 160 tons -Stroke: 600 mm -Insertion height: 800 mm -Table size: 660 x 800 mm -Table hole: Ø 250 mm -Projection: 330 mm -Operation: hand lever -Dimensions: 1780/1090/H2920 mm -Weight: 8000 kg

Condition: as good as new (ex-display), The HPK 100 A is a powerful hydraulic press within the Hydraulic Presses category, part of the broader Presses group. Engineered with a robust C-frame construction, this machine is built in Europe, ensuring high reliability and longevity. Its versatile design allows for seamless operations such as punching, straightening, forming, and drawing, making it a valuable addition to various industry segments. The HPK 100 A features a significant pressure force of 100 tons and a stroke speed of 4 mm/s, ensuring precise and consistent performance. The user-friendly mobile control panel and easy stroke length adjustments offer added convenience, while the integrated safety standards guarantee operator security. Whether for testing or batch production, this hydraulic press can be tailored to meet specific requirements, with possibilities for Industry 4.0 integration. For those looking for a robust solution in hydraulic presses, you can order online to enhance your production capabilities today. Iisdpjq R Rk Dsfx Agzjk

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm Max. working area: 1010 x 300 mm Piston stroke: 400 mm Advance speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Features: - Side-shifting cylinder - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost. Iiodpfxjk Nz N Ej Agzek

Condition: used, Year of construction: 1978, pressure 63 t throat 280 mm stroke 160 mm table surface area 560 x 500 mm ram surface 280 x 280 mm dayligth 400 mm oil volume ca. 360 l total power requirement 22 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,45 x 1,75 x 2,67 m - Workroom enclosure with Sick light barrier - Large ram with ejector and pin clamp - foot switch - Motorized depth stop in the cylinder Iisdpfx Agohbalnjzek

Condition: good (used), Pressing capacity 63 t Piston speed downwards 85 mm/s Piston speed upwards 170 mm/s Throat depth 280 mm Stroke 460 mm Installation height 680 mm Table bore 135 mm Table size W x D 650 x 520 mm Table height 750 mm Iijdpfx Agjwlbz Hjzsk Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: refurbished (used), Year of construction: 2007, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 210-026, total height: 3,900 mm, total width: 1,800 mm, total length: 3,200 mm, pressing force: 250 t, table width: 1,200 mm, table length: 800 mm, After retrofit / complete overhaul in 2023, the machine was only used for small test runs. Control system is completely new. Iedpfx Agjx Auwaszsik

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t Ijdpfx Agoxrb Nbezeik - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Iiedpfjv Tp D Tex Agzsk Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Condition: new, Technical Data: Capacity: 60 t Installation height: 820 mm Max. working area: 820 x 300 mm Piston stroke: 400 mm Advance speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Features: - Laterally movable cylinder - Generously sized working area - Height-adjustable table Iijdpfxjk Nz Ndo Agzsk - Torsion-resistant design made from welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Year of construction: 1992, condition: used, pressure 30 t throat max. 250 mm stroke max. 200 mm power stroke 20 mm dayligth 475 mm Isdpfephvl Nex Agzeik table surface area 550 x 500 mm weight of the machine ca. 2050 kg

Year of construction: 1978, condition: ready for operation (used), An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement. Iisdpfx Agox Aunfjzek

Condition: used, Year of construction: 2005, pressure 25 t stroke 145 mm daylight between the columns 600 x 160 mm Isdpfoxz Sbyjx Agzeik weight of the machine ca. 0,15 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m Side-adjustable cylinder

Condition: used, Year of construction: 1992, Technical details: Iiodpoxv Awzjfx Agzok voltage: 400/50 V/Hz air-pressure connection: 7 bar control: - pressure capacity max.: 340-375 t total power requirement: 15 kW weight of the machine approx.: 1,4 kg dimensions of machine: 1,4 x 0,8 x 1,6 m Hose and crimp press · Series production of hydraulic hoses (workshop, repair, production line). · Robust design with high pressing force ? suitable for large hose diameters and high-pressure fittings. · Clean operation thanks to lubricant-free bearing technology longer service life, less contamination on workpieces. Working range: All hoses up to 6SP (SAE 100R 13–14) and crimp fittings up to DN 125 or I.D. 5 Crimping range: from Ø 9 to Ø 180 mm Crimping tool: Double-wedge system (domestic and international patents) Maximum crimp stroke: Ø 20 mm Maximum adjustment range: Ø 10 mm Number of crimping programs: 3 *

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Iiodpfx Agsxf Uqrszok Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm Max. working area: 1100 x 350 mm Ram stroke: 400 mm Advance speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally adjustable cylinder via rack, pinion, and handwheel - Spacious working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Manometer - Fine pressure adjustment - Additional hand pump Iijdpok Nz Ntofx Agzok Support prisms available at extra cost.

Condition: used, AMADA-PROMECAM THREE-AXIS ELECTRONIC HYDRAULIC PRESS BRAKE MODEL STPC 160 30 S00308 NO. P171 (7385) Auction liquidation due to cessation of activity and definitive closure of a second-hand industrial machinery tools company Brand: Amada Model: STPC 160 T / 4100 Capacity: 160 t Ijdpexzua Eefx Agzeik Length: 4100 mm Folding length: 3.1 m CNC: Amada brand CNC Model: DNC 7000 Type: 160-40 STPC Stroke: 220 mm Motor Power: 13 kW Weight: 11,500 kg Pneumatic axes: 4 Tools included

Condition: new, Year of construction: 2025, pressure 100 t stroke 380 mm table surface area 1100x424 mm Iisdpfx Aexu Nv Isgzok dayligth 180/750 mm distance between columns 1100 mm diameter of piston 90 mm

Condition: used, Year of construction: 1994, Technical details: voltage: 400/50 V/Hz air-pressure connection: 7 bar control: - operating pressure: 330 bar pressure capacity max.: 500 t air pressure - required: 7 bar total power requirement: 15 kW weight of the machine approx.: 1300 kg dimensions of machine: 1,5 x 1,1 x 1,6 m Hose and crimp press Iisdpfjxv Awuox Agzsk · Series production of hydraulic hoses (workshop, repair, production line). · Robust design with high pressing force suitable for large hose diameters and high-pressure fittings. · Clean operation thanks to lubricant-free bearing technology ? longer service life, less contamination on workpieces. *

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 Iedpfxowva I Ho Agzoik 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, AMADA-PROMECAM THREE-AXIS ELECTRONIC HYDRAULIC PRESS BRAKE MODEL STPC 160 30 S00308 No. P172 (7384) Iedjxzt Tkopfx Agzsik Liquidation by auction due to cessation of activity and final closure of a used industrial machinery trading company. Brand: Amada Model: STPC 160 T / 4100 Capacity: 160 t Bending length: 3.1 m CNC: Amada DNC 7000 Type: 160-40 STPC Stroke: 220 mm Motor power: 13 kW Weight: 11,500 kg Pneumatic axes: 4 Tooling: included

Condition: new, Year of construction: 2025, pressure 060 t stroke 350 mm table surface area 750x344 mm dayligth 197/750 mm distance between columns 750 mm Isdpfjxu Nvzox Agzoik diameter of piston 75 mm

Condition: used, HYDRAULIC folding and bending machine. AJIAL BRAND MODEL 1410. CAPACITY 4050 X 140 TN, SYNCHRONIZED MANUAL STOP. Folding length 4050 (5195) Liquidation by auction due to end of operations and final closure of a used industrial machinery and tools company Brand: AJIAL Model: 105 Folding force: 140TN Folding length: 3050 Distance between columns: 2600 mm Approx. Y dimension: 40 mm Y bending size: 7.5 mm Y return size: 50 mm Table distance to cutting area: 500 mm Iodjxzrcqepfx Agzjik Table width: 240 mm Table height: 850 mm Throat depth: 300 mm Weight: 10,000 kg