Used Press Cylinder for sale (19,352)

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Dedpetyyvwsfx Aarowd Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Programmable control, heated platens, 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition! Djdpfxez Rn Sfe Aarewd

Year of construction: 2014, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10150, General Description For sale is a professional assembly press manufactured by the Spanish company Enginyeria Teknics Sabadell, S.L. This unit dates back to 2014 and is factory-designated as "PRENSA REAR WAVE 2". The machine is equipped with an advanced electromechanical actuator (pressing module) from KISTLER, with a nominal pressing force of 60 kN. This system is designed for precise pressing, assembly, and force testing processes in industrial applications. Technical Data (TEKNICS Press) Manufacturer: Enginyeria Teknics Sabadell, S.L. (Spain). Machine Number: 10150. Serial Number: 338.003 6775. Year of Manufacture: 2014. Power Supply: 400 V / 50 Hz. Power: 25 kW. Required Pneumatic Pressure: 6 bar. Machine Weight: 800 kg. Certification: CE marking. Technical Data (KISTLER Actuator) Manufacturer: KISTLER (Dr. Steiger Mohilo+Co GmbH). Type: 2151B60304002. Model: NCFH 60 400 300 B H C G. Nominal Force: 60 kN. Serial Number: 2683373. Actuator Weight: 87 kg. Certification: CE marking. Dsdjz Rz Rhjpfx Aarowd Construction and Equipment Stable construction with a dedicated protective enclosure consisting of black mesh panels and yellow profiles. The operator's work area is protected by optical safety barriers (light curtains). The work area features a massive mounting plate with threaded holes and a set of tools, dies, and adapters to facilitate part positioning. A free-standing control cabinet is included with the press. The cabinet door houses the operator panel (HMI) with a display, the main power switch, and an emergency stop button.

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar Dwedpezp Ex Usfx Aared - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Profi Press: Portal presses, straightening presses, and other custom-made hydraulic presses for large and specialized projects. *Do you have a large workpiece or a specific pressing application? We build the press to meet your requirements.* RHTC supplies custom-made hydraulic portal presses/straightening presses for processing large and heavy workpieces. From an extra-long work table (recently delivered a 200-ton model with a 5000 x 4500 mm table size) to multiple portals and cylinders: we discuss your application and, together with you, develop a suitable design. *Custom-made solutions for your product and process.* Depending on the application, we can customize, among other things: - Press force and table dimensions - Working width, free working height, and cylinder stroke - Number of portals and cylinders - Manual or motorized movement of portal and cylinder - Hydraulics, electrical design, and controls - Software for setting and storing various parameters In this way, we tailor the machine to the dimensions of your product, the required process, and the way you want to work. *From a special portal press to a larger industrial project* Our realized projects include portal presses with long and wide work tables, designs with two portals and two cylinders, and presses for pressing large shafts out of gearboxes. Even with extensive custom-made projects, the design starts with your application. We discuss the requirements, develop the design, and submit the technical drawings for your approval before production begins. *Customization across our entire machine range* Our capabilities extend beyond portal presses. You can also request custom-made solutions for other types of hydraulic presses, from small to large, from our range. We assess each project to determine which modifications are technically feasible and appropriate. This includes hydraulic workshop presses with a wider working width (including a sliding cylinder), C-frame presses for performing tests in a laboratory, production presses for compacting powder, arch presses for shipbuilding, and four-column presses for very precise pressing operations. *Discuss your project with RHTC* Dsdpfxj Ah El Sj Aarjwd Send us your application, workpiece dimensions, and desired press force via the contact request in this advertisement, if known. If possible, include a drawing or photo. This will allow us to assess your request and discuss a suitable design and quote. You can also submit your request via the contact form on the RHTC website. The photos show examples of realized custom-made solutions. The design and specifications offered are determined per project.

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Dedpfxez A R Irs Aarjwd Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Dwedpfxezxclds Aarod Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: used, ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Rod circumference: 28 cm Diameter: 8.90 cm The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x press unit Dsdpfxohtyxle Aarswd Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Dwodpfx Aaj Aa Ndyjred Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg Dwjdoy Tptaspfx Aarsd The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm Dwsdpfx Aou D Tz Uoarjd - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: good (used), Columbian Press 1858 Letterpress Manufactured in Great Britain by Henry Watts Dodpfx Aez N Shbearewd Year of manufacture 1858. Can be used as a work machine or as a museum exhibit.

Condition: used, Year of construction: 1960, machine/vehicle number: 16945, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBGYear 1960 - Serial-No. 16945 Size min.: 210 x 280mm Size max.: 560 x 7700mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.0800kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Dsdpfsrttuhex Aarjwd Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB >>2025 generalüberholt / 2025 complete overhauld Dwjdpjzzyprofx Aarod

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Max working width: 880 mm No of Pressing cylinders: 4 No of Daylights: 1 Dwsdpfxex A Tf Aj Aared

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm Dwjdpfx Aszrpt Uoarjd capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 36536, Black Model Djdpfxozcc S Hj Aarewd Standart Machine

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 70 t, stroke length: 400 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, cylinder diameter: 70 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dodpfx Aaj Af Hn Hsrewd Press drive: Hydraulic Total pressure: 70 t Working pressure: 2 kg/cm² Total stroke: 400 mm Number of working stations: 1 Number of levels: 1 Plate material: Mounted plate Number of cylinders: 6 Cylinder diameter: 70 mm Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 400 mm Heating type: Oil-heated Temperature: max. 120 °C MACHINE DETAILS Main motor power: 2.1 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,100 x 2,050 mm Unladen weight: 4,020 kg Number of transport packages: 1 EQUIPMENT Documentation Heating boiler CE marking CE certificate

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 55 kW (74.78 HP), input voltage: 400 V, type of input current: AC, total length: 13,000 mm, total width: 4,600 mm, total height: 2,330 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, Membrane Press WEMHÖNER VARIOPRESS® – Model BASIC Plus Technical Data: Press System: Hydraulic, single-daylight, upward-acting press with 2 tables, with automatic Vario-pin system and turning system. Year of Construction: 2012 Press frame consists of a steel frame, which is screwed together to form a closed unit. Each frame is made from a single piece. Dsdj Aid Etspfx Aarowd Dimensions of the heating plate: 2,800 x 1,500 mm Height of the press chamber: 60 mm Working height: approx. 950 mm Opening width: max. 150 mm Automatic membrane tension: Yes Number of press cylinders: 6 Diameter of press plungers: Ø 125 mm Design of the press tables: 2 tables with pin system, solid steel plates – top and bottom. Max. loading or workpiece size: approx. 2,540 mm x 1,250 mm Total press force: 2,400 kN Installed power: 55 kW Operating voltage: 400 V Control voltage: 24 V Brake voltage: 205 V Frequency: 50 - 60 Hz Electrical equipment: According to EN Cutting station: Yes Chamber pressure: max. 6 bar Operating pressure of the hydraulic system: max. 320 bar Required air pressure: min. 8 bar / approx. 80 Nl/ Multi-function frame: Yes – Wemhöner patent – Height of the multi-function frame 20 mm 2-daylight lifting system including support table 2 tray carriages with an aluminum plate. The aluminum plate consists of an aluminum sheet with grooves and channels for ventilation, as well as a support frame of 20 mm. Turning Turning device – lateral As soon as the tray reaches the position at the outlet of the press, the turning head rotates the entire workpiece mat by 180°. During the turning process, a vacuum system is activated to fix the door mat under the turning head. As soon as the turning head reaches the end position, the vacuum is switched off, and the doors can be trimmed by the operator in one step with a special knife. - Robust, welded steel frame construction for supporting the machine elements - Hydraulically controlled turning process - Turning table with plastic cover - Vacuum system for the turning table - Turning process approx. 18 seconds Electrical control: Programmable controllers (PLC) of type SIEMENS Step 7 for the entire scope of supply. Control panel as a touch panel for the PLC control SIEMENS MP 277 with a 10-inch color monitor in the national language. Decentralized switching and control panel including wiring. Analog modem for monitoring the program sequence of the PLC controllers.

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 1,500 mm, overall weight: 1,145 kg, No minimum price – guaranteed sale to the highest bidder! The press is in new condition and has not yet been used! TECHNICAL DETAILS Press force: 100 t Stroke: max. 380 mm Table width: 1,500 mm Height adjustment: 1,000 mm Ram speed: 10 mm/s Dwedpfx Aao Af Hd Ujrjd Column spacing: 1,500 mm MACHINE DETAILS Press type: Single-acting Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 2,100 mm Net weight: 1,145 kg Number of transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg Dwjdsx Edl Ejpfx Aared

Condition: used, Year of construction: 1970, Used Machine Year of manufacture: 1970 Features and Technical Specifications: - Equipped with gold-anodized ELKOM energy-saving plates - Platen size: 2550 x 1350 mm Dsdpfx Aao Ahr A Iorewd - Total pressing force: 100 metric tons - 4 pressure cylinders, 100 mm in diameter - Opening width: 400 mm - Weight: approx. 4,700 kg The machine does not have a safety pull cord; this can be retrofitted upon request

Condition: new, Hydraulic cylinder Cilinder stand exchange cylinder Chamber filter press Dodsd Hgahspfx Aarjwd As a spare part for your chamber filter press, we supply hydraulic cylinders for all manufacturers and formats.

Condition: used, Letter Press Cylinder DIE Cutter Heidelberg KSB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Dwjdpfxoyfhthe Aared Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Dsdpfjz S Utlsx Aarswd Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement.