Used Die Cutter for sale (6,606)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, TS1600 creasing and die cutter machine is an indispensable piece of post press equipment which is widely used for die cutting, and creasing of adhesive stickers, carrier bags, book covers, packing boxes, greeting cards, desk calendars, corrugated cartons, etc. It can effectively cut the desired material into large numbers of the same shape. Max. die cutting size 1600 mm X 1200 mm Dsdpjy Sz S Sofx Ackoch Working speed 20±2 pieces/min Machine is at our premises, testing on-site is possible.

Year of construction: 1997, condition: excellent (used), Ref: 11107 . 1997 Bobst SP 104 E Excellent condition, ex Swiss print house, only 32,500 hours worked! Now fully cleaned & checked by specialist engineer. Die cutting machine with stripping and blanking. Equipped with: Automatic feeder Double-sheet sensor Central line for quick job change Dcodpoy Uyb Rofx Ackoh Bobst C.U.B. electronic control system. E. (Bobst Electronic Control Unit) Micrometric adjustment Quick Lock cutting chase 1-4 mm cutting plate Micrometric Adjusting Upper pull-out stripping frames Central pull-out stripping frame Lower pull-out stripping frames Upper and lower stripping hardware Non-stop device Automatic waste removal apron Synchronization device timing the sheet arrival against the front lays Lateral adjustment for suction device Pull guide OOS Chase changer Auto delivery with non stop Specification: Speed: 8000 sheets/h Pressure: 2,5 MN (250 tones) Sheet size: 104 x 74 cm max.40 x 35 cm min., sheet thickness: 0,4 cm, Punching with gripper margin: 104 x 71 cm Punching without gripper margin: 104 x 74 margin adjustable: 9-17 mm Embossing format: 104 x 71 cm Punching line height: 23,8 mm, Height of embossing plate: 6.35 / 7 mm Material: Paper from 80/90 g/m², Solid board 250 to 2000 g/m² Corrugated board E and B up to 4 mm.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Dcedpoy Umkfefx Ackeh Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. Djdoy Tu Sbepfx Ackjch The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: good (used), Original Heidelberg GT 34×46 Automatic Die Cutter Djdpjy Tu R Rofx Ackjch This machine can cut, creas, perforate, and even print (optional). Excellent condition, recently serviced. 100% original, no modifications. Machine format: 34x46cm Pressure: 60t Weight: 600gsm Working speed: 4000 sheets/h Weight: 2300kg Fully complete, includes frame and spare parts, but no print rollers. A very rare machine on the market.

Condition: excellent (used), Year of construction: 2003, operating hours: 40,000 h, functionality: fully functional, cutting width (max.): 790 mm, color channels: 5, Good working condition, stripping Dedpjhtncuofx Acksch

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Dcjdpfoy Sfbkex Ackjh Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: excellent (used), Year of construction: 2002, Iberica JRK-105 Automatic Die Cutter Year – 2002 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 400 x 350 mm Cardboard thickness up to 1.5 mm Corrugated board thickness up to 3 mm Clamping capacity: 9-17 mm Maximum speed: 8500 sheets/hour Dodpfxoy Uwzns Ackoch Maximum pressure: 300 t Stripping section Separation section Centerline 1 mm plate Micro-adjustment Double sorting unit

Year of construction: 1997, operating hours: 27,000 h, condition: excellent (used), Bobst SP 130-SER in very good condition, available due to business closure. Dsdpfsy S A Hwjx Ackech Max. sheet size: 130 x 92 cm Min. sheet size: 58 x 54 cm Cutting force: 500 tons Speed: 6,500 sheets/hour Operating hours: 27,000 hours For any further inquiries, please contact us via email or WhatsApp.

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Dedpfx Aey Szlxockech Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides 2 rotary punches, numerous adjustment options Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. Dcsdpfx Ajy Syivockeh We can provide support for integrating the machine into an existing profiling system or other equipment.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks. Dedpfjy E Ex Aox Ackjch

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers Dcodpsy Rumyofx Ackeh - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console Dcodpfjy Rummjx Acksh – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame Dedoy Rumaepfx Ackech – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Djdpfey Rulvex Acksch Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Dcsdpsy Rulcjfx Ackeh MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Dodpfxjx Syvce Ackech

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Equipment: Krause autofeed die cutter Dcedpfx Acsvfx Ulskoh Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: ready for operation (used), Year of construction: 2005, Bobst SP 104 ER Die-cutter Diecutter with stripping and blanking station Technical specifications: Djdpfx Acowgz H Eekoch Paper min. 90 g/m2 Cardboard max. 2000 g/m2 Corrugated board max. 4 mm Min. sheet size: lxw 350 x 400 mm Max. sheet size: lxw 740 x 1040 mm Max. dimensions of cutting die: Max. lxw 725 x 1040 mm Cutting force: 250 tons Running speed: max. 8.000 s/h. Centerline for job quick-change Adjustable centering at the stripping and at the delivery, Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic) Non Stop Feeder, Steel plate, Double Sheet Sensor, Left hand pull lay, Right hand pull lay, Micrometic adjustment, Centerline, Double Action Stripper, Blanking Station, Quick lock stripping frame,

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. Dcedoymmqzopfx Ackeh • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB Dodpfx Aeyuw S Eockoch >>2025 generalüberholt / 2025 complete overhauld

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____ Djdpfeyz Adnex Ackech

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system Dodsdzqmzepfx Ackjch - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Dcjdpfeylqd Aex Acksh Included frame and tools Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test