Used Die Cutting Machine for sale (69,058)

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. Ibsdpfx Aezlahiskxea The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, Ibjdpfx Akezur Hpexoa – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Year of construction: 2000, condition: used, - 5 printing units - 1 flexo coating unit - 6 UV drying units (air-cooled) - Rotary die-cutting unit - GAP Master - BST POWER SCOPE 3000 "Pro Mark Edition" - video system for print image monitoring Ijdpoy H U Uisfx Akxeba The scope of delivery also includes a rotary die-cutting unit for the back side; this can be used in place of the flexo coating unit. Full rotary, 355.6 mm Maximum web width: 340 mm Minimum web width: 120 mm

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Ijdpfx Asztn Rnokxoba Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: new, Die cutting machine ML-2000 NXL The machine is brand new. It is the heaviest weightlifting machine in this format. Format: 2000 × 1400 mm Weight: 14000 kg 380 V power supply Engine: 15 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication Iedpfx Akeztn Nwexsba – pneumatic lifting system of the sheet on the pressure – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in Europe.

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication Isdpfx Aoztn Nqjkxjba – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately Ibsdsztn Nkspfx Akxoa 12-month warranty.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Ibjdpfx Akjztn I Hexja Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added according to customer requirements. The MEBR+ operates in full rotation and semi-rotation modes. The semi-rotation mode is suitable for small print runs, while the full rotation mode is ideal for large print runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and deceleration phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system, which ensures excellent web tension control when the machine operates in semi-rotative mode. Standard features: - Maximum rotation speed 200 m/min (656 ft/min) – label stock - Maximum rotation speed 120 m/min (394 ft/min) – die-cutting, precision fit - Maximum semi-rotation speed 40 m/min (131 ft/min), depending on the plate size – die-cutting, precision fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter, as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of rotary knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40, and 76 mm (1, 1.5, 3 in) - Detection of paper and matrix tears - Winding upon label entry/label exit - Remote support via internet connection - Automatic stop at the end of the parent roll with programmable end-of-roll function - Semi-automatic winding - Foot pedal for step-by-step machine operation - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotation mode - Die-cutting repeats 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotation mode Ibodpfxszqnxts Akxoa - Maximum winding diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwinding diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 anti-static bar 1 "Clear-on-Clear" sensor 1 corona treatment 1 speed package (80 m/min in semi-rotation mode) 1 revolver unwinder 2 flexo unit for spot coating with rotating register 1 web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotary mode approx. 700 die-cutting sheets An MAHO extraction system for the trimming waste is available as an option at an additional cost!

Condition: new, · Die easy to replace · Automatic feeding with double sheet detection and automatic correction · Allows plain paper, coated paper, cardboard, PE film, etc. · Mainly suitable for stickers, tags, wine labels, playing cards, small boxes, etc. · Rotary die-cutting machine with magnetic cylinder · High pile suction feeder · Touch screen · Machine with automatic stripping · Three-cylinder system, with cover plate · Precision pressure adjustment · Wrap-around ejection system Isdpfx Aefg Ahuskxoba · Sensor for top reading and front registration

Condition: ready for operation (used), One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: approx. 250stitches/min. Inspection possible by prior arrangement. Ibjdjzk Nb Aepfx Akxoa

Condition: ready for operation (used), Punching force: 3000kN, table surface: 2200x1600mm, clearance at maximum stroke position: 190mm, punching stroke, adjustable: 20-160mm, working height without punching pad: 1050mm, punching speed V (down): 63mm/s, V (up): 71mm/s, V (high pressure): 6,8mm/s, punching sliding table, usable area: 2200x1600mm, travel, constant: approx. 120mm, in/out travel time, adjustable: approx. 2s, voltage: 400V, phases: three-phase, frequency: 50Hz, rated current: 55A, upstream fuse: 80A, control voltage: 230/24V, rated power: 30kW, protection class: IP54, operating pressure: 6bar, weight: 18t, with hydraulic unit type 250, with documentation. An on-site inspection is possible. Iodpezukrdefx Akxsba

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Ibedpfx Akezt Nbzsxoa Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: new, ROLLMAT - Roll Die Cutting Machine Key Features: - Fast setup – ready for box production in seconds - 150 tons of punching force for various materials - Compatible with conventional wooden die-cut tools - Mitsubishi PLC control with three modes: single, dual, and automatic transfer - High flexibility – processes corrugated board, fiberboard, plastics, foam and more - Durable and reliable – built to high Zemat TG standards - Manual, semi-automatic, and automatic operation - Safety features – automatic stop, safety doors, and acoustic alarms Applications: - Packaging: die-cut boxes, inserts, blister packs - Materials: corrugated board, solid board, plastics (PVC, PP, PET, PE, HDPE) - Foams: various densities up to 100 mm thickness - Other industries: leather, nonwovens, stationery Additional Features: - Working table widths from 800 – 2500 mm - Auto-stop after transfer on both tables - Programmable cycle control for greater efficiency Ijdpfxswvidqo Akxjba - High-durability polymer-coated upper roller - Optional table extensions available - Custom machines and tooling on request CE/UL certified – compliant with industrial standards

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter Ibedpjzmu I Tjfx Akxea The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Year of construction: 1999, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1999 -Dimensions: 600/600/H1300 mm Ibsdpfjb A N T Hex Akxea -Weight: 50 kg

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Ibsdjc Uldrjpfx Akxoa -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Year of construction: 1996, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1996 Ibedpfx Akob A H U Eoxsa

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically Iedpfx Ajb A Nc Hokxoba -Year of manufacture: 1995

Year of construction: 1975, condition: ready for operation (used), An automatic Wupa flatbed die-cutting and creasing machine (auto platen) is available. Material weight range: 100-1000g/m², min. sheet size X/Y: 420mm/600mm, max. sheet size X/Y: 800mm/1120mm, max. die-cutting size X/Y: 780mm/1100mm, max. die-cutting force: 240t, max. production speed: approx. 3000sheets/h. An on-site inspection is possible. Iodpfsznx I Hex Akxsba

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Ibedpfeziytmex Akxea Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Year of construction: 2022, operating hours: 9,500,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 4131.05/22, -Bograma BSR 550 Servo with pallet feeder Ibsdpfozl Skpsx Akxoa -Cylinder heater -Registration mark reader -Interface box for controlling an external vacuum valve -Stack delivery STA 550BK for a maximum of 9 sheets -Performance: 12,000 sheets/hour, 165 m/min -Minimum format: 210 x 297 mm -Maximum format: 550 x 750 mm

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Iodpfev Nzpgex Akxeba Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Iodpfx Akszgc Ubexoba The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Iodpfx Akszfwxxjxoba Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.