Used Die Casting Machines for sale (67,730)

Condition: used, Year of construction: 1972, functionality: limited functionality, FRECH DAM 100, year of manufacture 1972. General overhaul by Brescia Presse in 2000. The hydraulic system was converted to an external two-stage hydraulic pump with tube cooler. Mold spraying system Wollin, cooling belt and holding furnace RAUCH MO 125 E by RAUCH. Further details and pictures on request. Kdedsxn Sp Dspfx Ab Sog

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Kodpfx Abewywn Es Sjdg

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Kdedpfxew R Dgze Ab Sog

Condition: ready for operation (used), Year of construction: 1982, Clamping force: 300t, mold clamping area X/Y: 880mm/880mm, plunger stroke: 400mm, column diameter: 100mm, ejector force: 18t. Height adjustment: 200mm, clamping surface between the columns X/Y: 555mm/555mm, mold height min./max.: 200mm/650mm, mold opening stroke: 540mm, max. casting weight: 5.2kg. Dimensions X/Y/Z: approx. 6150mm/1950mm/2615mm, weight: approx. 16000kg. This machine is a spare parts carrier. Controls, electrics and paintwork must be renewed. On-site inspection is possible. Kedpfxett Dybo Ab Sjdg

Condition: good (used), Year of construction: 2020, Foundry machine for aluminum, IDRA 320PRP Refurbished Ontogepszerviz in year 2020 Kdsdjwpr Ufopfx Ab Sjg Good working condition AVAILABLE FOR SALE STARTING WITH 1ST OF SEPT 2025 SALE CONDITION IS EXW - DISMATLING AND TRANSPORT NOT INCLUDED IN THE SALE PRICE

Condition: used, functionality: fully functional, Specifications: Ksdpfxowtzpyj Ab Sjdg - (54) 22'' x 8'' x 3'' - 7.5 kg capacity moulds on transfer chain - Propane burner - CSA approved

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Press capacity: 250 tons Working length: 3100 mm Stroke: 365 mm Kodoya Iaqopfx Ab Sodg Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis travel: 620 mm Backgauge R-axis travel: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y-axis rapid traverse: 200 mm/s Y-axis working speed: 1-10 mm/s Y-axis return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC Control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable stop fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop points up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electrical foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for the lower tool, height 160 mm x width 60 mm, with 14 x 23 mm locating slot - TRUMPF tool system, without tooling Dimensions L x W x H: 0 x 2500 x 3400 mm Machine height: 3350 mm (max. height 3400 mm) Weight: 17,000 kg In good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) Kdsdpfx Aohmmfksb Ssg - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) Kdsdpfx Abexpqy Do Sjg - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) Kdjdpfx Absw Iq Ugs Seg - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 1300 mm Measurements height 2500 mm Machine weight 1540 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Kodpox D Inbsfx Ab Sjdg Table Table load 400 kg Additional Equipment Max. Electrode Weight: 80 kg This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm Kedpfx Abjc R Iyas Ssdg -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable Kdedpfxei Eg Nko Ab Sjg -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch Kodpfoc Uldrsx Ab Sjdg -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Kdodpjlyqrcsfx Ab Ssg Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 570 x 820 mm Minimum sheet size 230 x 280 mm Max. cutting pressure 1.8 MN Maximum number of strokes per hours 8.000 sh h Kdjdpfx Abjlyqpds Seg Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000g/m² Corrugated board up to a maximum thickness of 3 mm Equipment Feeder Strippingstation including auxiliary pile for Non-Stop delivery Centerline 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform Ksdpfxolyp Eme Ab Sjdg 1 tool set Machine delivery time: 6-8 month after order

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Kdodjyaq S Aspfx Ab Sog Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Condition: excellent (used), Year of construction: 2017, Manufacturer Fanuc Model Robocut ∝-C 600iB Year 2017 Condition Used Maximum weight of the part 1000 kg X 600 mm Y 400 mm Z 310 mm Z (optional) 410 mm U ±100 mm V ±100 mm Maximum tapered cutting angle ±30° in 150 mm Kdodpfxjx Avh Hj Ab Ssg Wire diameter 0.10 to 0.30 mm CNC System FANUC Series 31i-WB Machine dimensions (W x D x H) 2440 x 2430 x 2160 mm Machine weight 3000 kg

Condition: ready for operation (used), functionality: fully functional, Machinery for the production of structural packaging. Includes a die-cutter H-142, year 1986, size 900x1400 mm + box maker, manufacturer Pack Projekt, year unknown – purchased in 2009 – feed width 1450 mm – additional creasing bar for vertical creases – slitting blade 350 mm + gluing machine for self-adhesive tapes including silicone tape dispenser and tear-open thread – feed width 1400 mm – year 2010 – hot melt glue system. All machines are used. Ready for operation and functional. SEE PICTURES AND DOCUMENTS Kdsdpfeyan I Ijx Ab Seg

Year of construction: 2014, condition: ready for operation (used), General Data Measurements width 2700 mm Measurements depth 1600 mm Measurements height 2858 mm Machine weight 4400 kg Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm This AgieCharmilles FORM 30 was manufactured in 2014. A robust die-sinking EDM machine, it's ideal for detailed and precise metalwork. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking edm machine. Contact us for more information. Kedpox D D Dfjfx Ab Sjdg Application Types EDM

Year of construction: 1996, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Kdjdpfx Asb A H U Esb Seg -pneumatically operated -Year of manufacture: 1996

Condition: used, Year of construction: 2003, total height: 2,980 mm, total width: 2,400 mm, total length: 3,000 mm, Empty weight: 5.000 kg Price: On request EDM, Erodeermachine, vonkmachine Model: CNC Manufacturer: AGIE Type: Agietron Impact 3 Year: 2003 Controller: Agie Agievision Table: 800x600mm Travel: 500x350x500mm Max. Workpiece weight: 800kg Max. Electrode-weight: 50kg Kodjwnhfkepfx Ab Sjdg Video available Documentation available Machine-dimensions: 2850x2150x2850mm Machine-weight: 3800kg - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Control type: Agie Agievision - Control: CNC - Transport dimensions: 3000mm x 2400mm x 2980mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Control: Kodexxbwxepfx Ab Sodg - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables + MultiTool + Thread forming with thread counter + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning Kdedpfx Absxxbdlj Sjg - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post