All electric injection molding machine buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
3
Producer: ARBURG Type: 520 A 1600-400 Electric Machine Year: 2006 Clamping unit clamping force: ton 160 opening Stroke: mm 575 distance between tie bars: mm 520 x 520 mould height min/max: mm 250 / 825 size of mould plates: mm 695 x 695 8p0jec0 Injection unit screw diameter: mm 45 injection volume: cm³ 254 shot capacity: gr 232 injection pressure: bar 1580 more
4
Injection molding machine Bz3uvhcwo Brand: Arburg Type: Allrounder 270M 500-90 Clamping force: 500 kN year of construction 1990 Operating voltage: 380 V 3-50 Hz Motor power: 3 kW / 400 v / 50 Hz Heating: 3.46 kW Pump motor: 11 kW Total connection: 14,8 kW Dimensions: 3600 x 1200 x 1500 (l x d x h) Weight ca. 2000 kg Machine in the apparently, according to age-good condition. Machine comes from a current production. Ready to use. Machine is sold without warranty or guarantee. ... more
6
CONDITION: The off timer has disconnected the electrical cabinet. Also, we have found that the Housing (plastic housing) the cam switch injection unit is broken. Used housing is provided. Machine without installation and function check! Bnwfp0j That's why Sionderpreis on request more
1
warehouse no.: 502244 manufacturer: ARBURG Typ: Allrounder 175 V 125 - 30 Controller Unit: SELOGICA year of construction: 2012 operating hours: 726 h clamping unit clamping force: 125 kN min. mould height: 77 mm max. open daylight: 302 mm opening stroke: 225 mm size of round table: 630 mm injection unit screw diameter: 15 mm swebt volume: 10 ccm injection pressure: 2200 bar equipment 3ioqj3ls8 Anti vibration mounts air valve fixed WAP CEE-socket 16A interface for ejector plates safety S... more
6
Netstal E-Jet, all electric injection moulding machine, previously used for DVD and Blue ray production W2g9uex79 - Take out handling on right side - suitable for DVD and Blu ray production - 5 x HB Therm 140 temperature Controllers - low operating time, as good as new Cycle time : 2,8 sec for DVD replication Control : DSP 3 Dimensions : L x W x H 3285 x 1005 x 1801mm Weight : approx. 4.500 kg AWM DVD and AWM Blu ray mould available on request more
6
Stock number: 150015 Type of machine: Injection molding machine Make: Arburg Type: Allrounder 221E / 150P Year: 1976 Location: Germany Shipping time: immediately Freight base: ex works / foundation 35 to closing. Machine is suitable for horizontal and vertical use. Machine is still in use, but can at any time be issued. Alterations and error in the technical details and statements. Uuttpr9uy more
4
Injection molding machine Brand: Arburg Type: Allrounder 170 CMD 150 45 Clamping force: 150 kN year of production 1988 Operating voltage: 380 V 3-50 Hz Motor power: 3 kW / 400 v / 50 Hz Heating: 2.49 kW Pump motor: 5,5 kW Total connection: 8,2 kW Ctavsrgc Weight ca. 1040 kg Machine in the apparently, according to age-good condition. Machine comes from a current production. Ready to use. Machine is sold without warranty or guarantee. You can visit the machine in 75334 Straub... more
4
Screw D = 45 mm = injection shot weight PS 260gr., with Geiger handling EA 21 Siemens Bj.12/95.,hydraulisches conveyor 3ifszv77a more
3
Netstal E-Jet, all electric injection moulding machine, previously used for DVD production He2epod8m 2 x machines available 1 x Ejet with take out on left side 1 x Ejet with take out on right side cycle time : 2,8 sec for DVD replication Control : DSP Dimensions : L x W x H 3285 x 1005 x 1801mm Weight : approx. 4.500 kg DVD mould available on request more
4
Injection molding machine Brand: Arburg Type: Allrounder 170 CMD 150 45 Clamping force: 150 kN year of construction 1989 Operating voltage: 380 V 3-50 Hz Heating: 2.49 kW Pump motor: 5,5 kW Total connection: 8,2 kW Weight ca. 1040 kg Machine in the apparently, according to age-good condition. 7daevqpz2 Machine comes from a current production. Ready to use. Machine is sold without warranty or guarantee. You can visit the machine in 75334 Straubenhardt, d 11. more


all electr...
every day

New machines via email!

Be informed!
4
Injection molding machine Brand: Arburg Type: Allrounder 270M 350-90 Clamping force: 500 kN year of construction 1990 Operating voltage: 380 V 3-50 Hz Heating: 3.46 kW Pump motor: 11 kW Total connection: 14,5 kW Dimensions: 3600 x 1200 x 1500 (l x d x h) Weight ca. 2000 kg 7dacsyinu Machine in the apparently, according to age-good condition. Machine comes from a current production. Ready to use. Machine is sold without warranty or guarantee. You can visit the machine in 753... more
4
Injection molding machine 7c98wy9jh Brand: Arburg Type: Allrounder 270 - 90-350 Clamping force: 350 kN year 1987 Operating voltage: 380 V 3-50 Hz Heating: 3.46 kW Pump motor: 11 kW Total connection: 14,5 kW Weight ca. 2000 kg Machine in the apparently, according to age-good condition. Machine comes from a current production. Ready to use. Machine is sold without warranty or guarantee. You can visit the machine in 75334 Straubenhardt, d 11. more
6
Injection moulding machine without control Brand: Arburg Type: Allrounder 270M 500-90 Clamping force: 500 kN year of production 1994 Operating voltage: 380 V 3-50 Hz Motor power: 3 kW / 400 v / 50 Hz Heating: 4 kW Pump motor: 1 x 15 kW Total connection: 19 kW Dimensions: 3600 x 1200 x 1500 (l x d x h) Weight 1800 kg Olslbfec Machine in the apparently, according to age-good condition. As defective without control. Machine is sold without warranty or guarantee. You can visit the... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cn3xv2y3 SUMITOMO SH220-C Injection Molding SystemSpecifications:Clamping System Type: Hydro-MechanicalPress Tonnage : 240 TonsShot Size: 23.8 [...] Size: 35” X 33”Tie Bar Spacing: 24” X 24”Minimum Shut Height: 9.8”Maximum Daylight Opening: 42.9”INCLUDES:Hydraulic Core PullSUMITOMO SH220-C Injection Molding System more
4
screw size:40 mm screw size:40 mm injection shot weight in Polysterol:166 g/PS closing pressure:1300 kN daylight:470 x 470 mm opening stroke:575 mm 7iszu3c7k mould height - Max./min.:275 mm control:Selogica daylight between platens - max.:850 mm dimensions of the machine ca.:4,50 x 2,00 x 2,20 m m weight of the machine ca.:6,3 t total power requirement:33,4 kW S-version IV - with Selogica control - technology step 2 - with 2 regulating pumps - increased - LCD control monitor, colour type -... more
2
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force 60 Kunststoffspritzgiesspresse-to-screw diameter 50 mm control Unilog 4000-spar spacing 320x320 mm core pull data collection terminal Msifww more
6
screw size 20 mm 9qlst injection shot weight in Polysterol 25 g/PS closing pressure 350 kN opening stroke 275 mm mould space 200 mm daylight opening 475 mm surface area 346x346 mm capacity of ejector 20 KN draw back pressure 12,3 KN ejector path 100 mm injection pressure 2500 bar control Arburg type Multitronica total power requirement 16 kW weight of the machine ca. 1,62 t dimensions of the machine ca. 3,3x1,7 m more
5
Dimensions (l x w x h) approx.: 5740 x 2040 x 2100 mm Weight approx.: 7800 kg Description: ARBURG ALLROUNDER 470V-2000-675 Injection Moulding Machine - working hours 89229 - connection power 57kW - normal capacity (pump) 2 x 22 kW - clamping force 2000 kN - clamping plates 715 x 715 mm - clamping unit distance 650mm - min. tool installation height 300 mm - max. opening width 950 mm - ejector stroke 225mm - ejector power back/forth 65 kN - screw diameter 45 mm - max. spray pressure 24... more
6
Kunstoffspritzgiessmaschine Manufacturer Demag Type ergotech viva 50-270 Year of construction 1998 Control of Demag 105 CC syringe volume 2576 bar injection pressure 50 to. Clamping force Machine is still in mode and is in a good condition Ccdo3epyk more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Dmigoe2 UBE Ultima UN720/204E Injection MolderSpecifications: -- Tonnage 720 Ton -- Shot Size 204 oz -- Platen 54.72" x 54.72" -- Tie Bar Spacing 37.40" x 37.40" -- Height 15.75" / 39.37" -- Daylight 55.12" / 78.74" -- Clamp Stroke 39.37" -- Ejector Stroke 7.08" -- Dimensions: 482.13" x 89.13" x 122.46" -- Weight: 104,500 LbsUBE Ultima UN720/204E Injection Molder more
3
Control: Unilog B4 closing force: 450 t Screw diameter: 75 mm Injection volume: 1657 cm³ Plate size: 1120 x 1120 mm Ekcs9d9 distance between lights: 800x800mm Shot weight: 1508 g Weight 20500 kg more
6
Manufacturer: Giardina, Type: MCD, Year: 1992, Work piece width min-max mm: 80 - 240, Min.-max. workpiece height in mm: 80 - 240, Feeding speed m/min: 15 - 50, Electrical power consumption kW: 48, FREE TEXT: 6 UV Röhren - 30 KW, Year :1992 Bw0gp7xae more
6
screw size 15 mm injection shot weight in Polysterol 25 g/PS closing pressure 250 kN opening stroke 275 mm mould space 200 mm Rw2skqmc daylight opening 475 mm surface area 346x346 mm capacity of ejector 17 KN draw back pressure 10 KN ejector path 100 mm injection pressure 2450 bar control Arburg type Multitronica total power requirement 12 kW weight of the machine ca. 1,62 t dimensions of the machine ca. 3,3x1,7 m more
5

Injection Molding Machine for Plastic Molded Parts REMU HMSY 2200

Düsseldorf Germany
6383 km
1991
USED
Closing bid
Auction finished
Dimensions (l x w x h) approx.: 18450 x 3370 x 3850 mm Weight approx.: 116000 kg 20yq2d27 Description: Clamping force 2200 kN, clear span tie-bars 1600 x 1600 mm, ejector stroke 600 mm, screw diameter 160 mm, tool opening path 2200 mm, max. opening width 4000 mm, min./max. mold thickness 600 mm - 1600 mm, contact pressure 1677 kg/cm², injection unit: shot weight 12560 g, injection speed 800 kg/h, injection capacity 13000 g more
5
Lager # 1203 Spritzgiessmaschine KM 110-520 C2 Baujahr: 1998 Bktienx8 Fabrikat: Krauss Maffei Typ: KM 110-520 C2 Lagerort: D-31535 Neustadt Frachtbasis: EXW D-31535 Neustadt more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Wz0vhxm7 BOY 30T2 Horizontal Plastic Injection Molding MachineSpecifications:Tonnage 30 TonShot Size 3 ozTie Bar Spacing: 10' x 10"Equipped with BOY Diptronic Controls/BOY 30T2 Horizontal Plastic Injection Molding Machine more
5
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force 50 Kunststoffspritzgiesspresse-to-opening stroke mm 375-sheet size 375/430 mm machine weight 3 to 37zbvoln more
5
screw size:115 mm injection shot weight in Polysterol:4395 g clamping force:10000 kN : INJECTION UNIT: screw size:115 mm max. swept volumne:4.830 cm³ injection shot weight in Polysterol:4.395 g/PS injection pressure:1.656 bar : CLAMPING UNIT: closing pressure:1.000 t tie bar distance:1.400 x 1.120 mm mould hight - min.:700 mm mould hight - max.:1.200 mm opening stroke:1.700 mm : CONTROL: microprocessor control:MC3F screen text:deutsch Manual:deutsch / german : EQUIPMENT: robot interfa... more
1
screw size:30 mm injection shot weight in Polysterol:71 g/PS closing pressure:500 kN Gowbawkva daylight:320 x 320 mm opening stroke:350 mm mould height - Max./min.:225 mm control:Selogica daylight between platens - max.:575 mm total power requirement:26,1 kW weight of the machine ca.:2,3 t dimensions of the machine ca.: m S version II - highly wear resistant plastification unit - with Selogica control - technology stage 2 - servo-regulated hydraulic plant with 2 regulating pumps - needle valv... more
5

Vertical Injection Molding Machine WAVE SWISS ARGOV 90

Düsseldorf Germany
6383 km
2016
USED
Closing bid
Auction finished
Dimensions (l x w x h) approx.: 3000 x 1200 x 1800 mm Weight approx.: 8000 kg Dmi0ws2 Description: Line pressure 140 bar, injection capacity 106 cm³, mold thickness min./max. 100/520 mm, type plate and details see photos more
3
Stock Nr. 1202 Clamping force 1250 kN Size of mould platens 745x770 mm Holm distance 530x470 mm Mounting height 300 mm Mould height min 900 mm Control System MC4 Language german Injection Unit Screw diameter 40 mm Stroke volume 217 ccm Injection pressure 2300 bar Dimension 4,60 x 1,52 x 2,20 m Capacity of pump motor 18,5 kW Heating capacity 13 kW Oil filling 345 l Net weight 7,7 to Color RAL 1013 7jtswg8lk Additional Information 2 Key features, 6 controlstations for heating duct. Connection fo... more
5
clamping force:150 t clamping force:1500 kN injection pressure:2022 bar robot interface:ja total connection power:35,0 kW max. swept volumne:377 cm³ microprocessor control:MC3-F opening stroke:620 mm screw size:50 mm injection shot weight in Polysterol:339 g CONTROL:MC 3 mould hight min.:450 mm total weight:9000 kg dimension L x W x H:6,2 x 2,1 x 2,1 m Cjhxjbpy more
5
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force 90 Kunststoffspritzgiesspresse-to-control Micro Control MC-3 opening stroke mm 610-sheet size 525/570 Machine weight 4.4 to Dyfaydl more
2
screw size:35 mm injection shot weight in Polysterol:153 g clamping force:1600 kN : INJECTION UNIT: screw size:35 mm max. swept volumne:168 cm³ injection shot weight in Polysterol:153 g/PS injection pressure:2.644 bar CLAMPING UNIT: clamping force:160 t tie bar distance:520 x 520 mm mould hight min.:275 mm opening stroke:500 mm centering ejector plate:160 mm centering nozzleplate:160 mm CONTROL: microprocessor control:NC5 screen text:deutsch / german Manual:deutsch / german EQUIPMENT: ro... more
6
1.0 St. gebr. Injection blow molding machine Manufacturer: UNILOY Type: IBS 45-3 S Year of construction: 1999 Assembly spray with hydraulic motorization Screw diameter: 35 mm Mtoul Maximum injection power: 190 gr. Maximum plasticising capacity: 28 kg / h form tonnage injection: 360 KN Form closing force bubbles: 90 KN Maximum dimension Form plates: 380 x 456 mm Closed shape height: 254 mm Form span: 128 mm Additional equipment of set of: Drop band Temperature control more
1
screw size 25 mm moulding weight 41,8 g closing pressure 350 kN tie bars distance 304 x 304 mm opening stroke 325 mm dayligth 150 mm injection pressure 2149 bar total power requirement 14,5 kW weight of the machine ca. 2,2 t Control: Unilog 4000 B Machine has one pit draw. belt convoyer Oiphs8gvy HB-Therm 80° Serial Nr. A35/04/11/0/05 more
5
screw size:35 mm Lumrjhmr injection shot weight in Polysterol:121 g/PS closing pressure:1000 kN daylight:420 x 420 mm opening stroke:500 mm (max.) mm mould height - Max./min.:min. 250 mm control:Selogica daylight between platens - max.:750 mm mm total power requirement:26,6 kW weight of the machine ca.:3,2 t dimensions of the machine ca.: m CS-version III - technology step 2 - with 2 regulating pumps - highly wear resistant plastification unit - interface for robot - connection for sorter uni... more
1
warehouse no.: 502148 manufacturer: ENGEL Typ: ES 2550-300 HL EC 100 year of construction: 1996 technical data: Clamping unit clamping force: 3000 kN size of mould plates h x v: 1150 x 900 mm 7gvqlsclv min. mould height: 350 mm max. open daylight: 1200 mm opening stroke: 850 mm technical data:injection unit screw diameter: 80 mm swept volume: 1558 ccm injection pressure: 1400 bar equipment included ✔ Schuko-socket 10A ✔ Anti vibration mounts ✔ machine without material hopper ✔ screen tex... more
5
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force 60 Kunststoffspritzgiesspresse-to-control Unilog 4000-spar spacing 490x490 mm core pull data collection terminal-weight 4 to Hivbtnp9o more
5
screw size:115 mm injection shot weight in Polysterol:5858 g clamping force:20000 kN : 2sv223o7n INJECTION UNIT: screw size:115 mm max. swept volumne:6.232 cm³ injection shot weight in Polysterol:5.858 g/PS injection pressure:2.205 bar CLAMPING UNIT: closing pressure:2.000 t tie bar distance:1.900 x 1.500 mm mould hight - min.:1.000 mm mould hight - max.:1.700 mm opening stroke:2.600 mm CONTROL: microprocessor control:Polaris screen text:deutsch / german Manual:deutsch / german EQUIPMEN... more
3
Manufacturer: Falconi Leistenspritzmaschine, Type: Profiplus, Year: 2007, Control: Programm, Work piece width min-max mm: 10-240, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-80, Working width mm: 300, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 5, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm: 400, Feeding speed m/min: 10-60, Number of units: 5, Feeding speed continous ad... more
1
screw size 40 mm injection shot weight in Polysterol 182 g/PS closing pressure 950 kN mould height - Max./min. 250 - 725 mm opening stroke 475 mm Oipksj88c tool clamping area 640 x 640 mm 420 x 420 mm total power requirement 27,5 kW weight of the machine ca. t dimensions of the machine ca. m CNC Injection Moulding Machine Unilog 4000 Control with core drawing with belt convoyer, HB Therm 80° drying air drier more
6
screw size mm injection shot weight in Polystyrol g/PS closing pressure kN ----- MOULD CLAMPING UNIT - locking force 1250 to - die opening stroke max. mm - mould height min. mm Xmlya8wd - mould height max. mm - max. distance between tool-plates 2700 mm - space between tie bars L1 mm - space between tie bars L2 mm INJECTION UNIT - Diameter of screw 125 mm - Injection pressure bar - Shot volume ... more
1
screw size:30 mm injection shot weight in Polysterol:65 g/PS closing pressure:800 kN daylight:420 x 420 mm opening stroke:max. 450 mm mm mould height - Max./min.:250 mm control:Selogica daylight between platens - max.:700 mm total power requirement:29,9 kW weight of the machine ca.:3,8 t Zvsguxrx dimensions of the machine ca.:4,50x1,30x2,00 m S version III - advanced simultaneous machine movement over enlarged holding pump - LCD control monitor, colour type - Selogica control - technology ste... more
5
Injection molding machine, injection molding machine, plastic injection molding, plastic injection molding machine, clamping force Kunststoffspritzgiesspresse-250 to control Micro Control MC-3 opening stroke mm 820-sheet size 900 x 830 Machine weight 12.5 to Qkzt0ay2j more
1
screw size:25 mm injection shot weight in Polysterol:54 g clamping force:350 kN : INJECTION UNIT: B92mfxwwo screw size:25 mm max. swept volumne:61,3 cm³ injection shot weight in Polysterol:54 g/PS injection pressure:2.000 bar : CLAMPING UNIT: closing pressure:35 t tie bar distance:280 x 280 mm mould hight - min.:180 mm opening stroke:350 mm : CONTROL: microprocessor control:NC4 screen text:deutsch Manual:deutsch : EQUIPMENT: robot interface:nein core pull:1 x without hopper / witho... more
2
screw size unbek. mm injection shot weight in Polysterol unbek. g/PS Vq0t8a closing pressure 650 kN total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
1
warehouse no.: 502252 manufacturer: ENGEL Typ: ES 80-35 HL-ST year of construction: 1992 clamping force: 350 kN size of mould plates h x v: 470 x 280 mm min. mould height: 150 mm max. open daylight: 480 mm opening stroke: 330 mm screw diameter: 25 mm swept volume: 49 ccm injection pressure: 1600 bar equipment included: ✔ CEE-socket 16A ✔ machine without material hopper ✔ Anti vibration mounts 7frsjitxc ✔ interface for ejector plates safety ✔ screen text german ✔ machine incl. water flo... more
5
screw size 80 mm injection shot weight in polystyrene 1764 g/PS clamping force 6.000 kN ***** injection unit ***** for processing thermoplastics screw size 80 mm max. swept volume 1.960 cm³ injection shot weight in polystyrene 1.764 g/PS spec. injection pressure increased 2.025 bar srew and barrel L/D 22 srew wear resistant S 6 cylinder in bi-metall M 3 regulated traverse cooling heating capacity 45 kW without material hopper ***** Clamping unit ***** hydromechanical 2-platen ... more
4
The following machines are offered: (1) 2-Component Injection molding machine Ferromatik Milacron K-Tec 155 S / MONO built 2007, clamping force: 1550kN, injection pressure: 2058bar, stroke volume: 471cm³, clamping plates: 750x750mm. (2) Injection molding machine Ferromatik Milacron K-Tec 155 S built 2002, clamping force: 1550kN, injection pressure: 2300bar, stroke volume: 382cm³, clamping plates: 750x750mm. Mtas9 more


all electr...
every day

New machines via email!

Be informed!

to

to

Change search
ALL ELECTRIC INJECTION MOLDING MACHINE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +49 201 - 451 854 83
or sell immediately
Try out the Machineseeker app now!
Machineseeker app for iPhone and Android.