Used Machines with a clamping force of 250 - 999 kN for sale (286)

Condition: used, Year of construction: 2010, Machine/vehicle number: 201107032033317, screw size:55 mm injection shot weight in Polysterol:36 g/PS closing pressure:3200 kN total power requirement:65,7 kW Bohhigi7Oso weight of the machine ca.:13 t

Condition: used, Year of construction: 2001, ENGEL ES 80/25 HL-V Clamping force: 25 ton + Picker Engel Controll : CC100 Dpjd97 Year : 2001 Serial nr. 45277 Screw: 22 mm

Condition: ready for operation (used), Used machine injection molding machine Manufacturer Krauss Maffei KM 80 - 520 C1 Year of construction: 1999 - 2003 Machine hours 35 - 66.000 h Technically all machines are identically equipped. 5 pieces in stock no delivery time, immediately available Inspection possible by appointment Machines are no longer under power Have been professionally stored Dptfbv Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Distance between tie bars (mm) 405×405 Installation height (mm) 250 Platen distance (mm) 750 MC4 control unit On-screen text German Injection unit Screw diameter (mm) 45 Injection pressure (bar) 1878 Stroke volume (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons Further photos on request.

Condition: good (used), Year of construction: 2004, Operating hours: 77,192 h, Functionality: fully functional, Clamping force: 700,000 N, Screw diameter: 35 mm, Total height: 2,000 mm, Injection pressure: 1,600 bar, Overall weight: 5,200 kg, Total length: 4,400 mm, Total width: 1,500 mm, Displacement volume: 154 cm³, Ejector force: 40,000 N, Type of input current: three-phase, Ejector stroke: 100 mm, Plate width: 670 mm, Plate length: 420 mm, Clear span: 600 mm, Input frequency: 50 Hz, Input voltage: 400 V, Equipment: Documentation/Manual, injection moulding machine ENGEL VICTORY 200-70 Tech warehouse no.: 503473 manufacturer: ENGEL type: VICTORY 200-70 Tech controller: CC100 year of construction: 2004 operation hours: 77192 h technical data clamping unit clamping force: 700 kN size of mould plates h x v: 670 x 420 mm min. mould height: 144 mm max. open daylight: 600 mm opening stroke: 594 mm C0Ug20Bmu0 ejector stroke: 100 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 675 kg technical data injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar screw length: 20 l/d screw speed: 400 min plasticising rate: 21 g/s PS injection rate into the open: 151 g/s PS number of heating zones: 4 nozzle stroke: 250 mm measures & weight measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 5200KG equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 1x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A

Condition: excellent (used), Year of construction: 2017, Operating hours: 400 h, Functionality: fully functional, Vertical injection molding machine with 3-station rotary indexing table Condition: very good Czqcfkq9Qw Operating hours: 400 h Machine is ready for operation and can be demonstrated under power The machine has been operated in automatic/robotic mode and therefore does not have a CE mark. Ideal for integration into a production line. CE certification may be required.

Condition: good (used), We offer a used injection molding machine. Ughmx7Kdhl DEMAG Extra 80 - 430. Year of manufacture: 2006. Details: see type plate.

Condition: used, Year of construction: 2006, Machine/vehicle number: 163132, screw size:60 mm closing pressure:2200 kN weight of the machine ca.:14,8 t dimensions of the machine ca.:7,00 x 2,50 x 2,20 m R3Jm3C9T0V

Condition: used, Year of construction: 2007, Clamping force: 80 tons Mould height: 300 mm Distance between platens: 600 mm Table diameter: 1200 mm Screw diameter: 30 mm Injection volume: 71 cm3 Shot wight (PS): 65 g Equipment: Cores: 2x Istvuoy Heating zones: 3x SELOGICA controll Machine was fully tested by Arburg , Very good condition! Machine has only 24.000 hours!!!

Condition: used, Year of construction: 2005, screw size 35 mm injection shot weight in Polysterol 152 g/PS closing pressure 800 kN Dpr9Bn Control CNC total power requirement 9,4 kW weight of the machine ca. 3,7 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2004, Operating hours: 83,909 h, Functionality: fully functional, Clamping force: 700,000 N, Screw diameter: 25 mm, Total height: 2,000 mm, Total length: 4,000 mm, Total width: 1,450 mm, Displacement volume: 69 cm³, Ejector force: 40,000 N, Type of input current: three-phase, Ejector stroke: 100 mm, Plate width: 670 mm, Plate length: 600 mm, Clear span: 594 mm, Input frequency: 50 Hz, Equipment: Documentation/Manual, injection moulding machine ENGEL VICTORY 200-70 Tech warehouse no.: 503474 manufacturer: ENGEL type: VICTORY 200-70 Tech controller: CC100 year of construction: 2004 operation hours: 83909 h technical data clamping unit clamping force: 700 kN size of mould plates h x v: 670 x 600 mm min. mould height: 144 mm max. open daylight: 594 mm opening stroke: 450 mm ejector stroke: 100 mm ejector force: 40 kN centering diameter of moving platen: 125 mm Dpsoi7 centering diameter of fixed platen: 125 mm weight of mould: 675 kg technical data injection unit screw diameter: 25 mm swept volume: 69 ccm injection pressure: 2090 bar screw stroke: 140 mm screw speed: 480 min injection rate into the open: 104 g/s PS number of heating zones: 4 nozzle stroke: 200 mm measures & weight measures of machine l x w x h: 4m x 1.45m x 2m total weight: 5200KG equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 1x air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A

Condition: good (used), Year of construction: 2006, 1x Arburg 320C 500-170 Year of construction: 2006 Ma-No. 202052 Screw: 25mm Uez93Jlx92 Blow out: 1x Core pull: 1x Conveyor belt electric Handling interface Temperature release up to 450°C Printer interface Interface coloring device The machine comes from current production and is available immediately! Delivery possible at cost, please contact us!

Condition: excellent (used), Year of construction: 2014, KRAUSS MAFFEI KM 65-180 CX (26.000 h)(S&P 3754) Hu3Oeps Manufacture year: 2014 Operating hours: 26,000 Stunden Screw: 35 mm Injection pressure: 1488 bar Stroke volume: 115 cm³ Clamping Force: 65 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4300 x 1500 x 2200 mm Eeight: 3900 kg Connected load: 15 kW price: 23.900 € MC 6 Programming, Robot Interface, Corepuller, heating injectionunit till 450°C, high wear/resistance screw and barrell contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2010, Arburg universal machine possible to use in Horizontal also Vertical position. Eha3J2Ug2 Clamping force: 35 tons Distance between tie bars: 270 x 270 mm Platten dimensions: 380 x 380 mm Screw diameter: 25 mm Injection volume: 49 cm3 Shot weight (PS): 45 g Injection pressure: 2000 bar Equipment: Cores: 2+5 Heating zones: 12 Hours: 31.000 only!

Condition: good (used), Year of construction: 2004, Functionality: fully functional, Clamping force: 350,000 N, Screw diameter: 18 mm, Total height: 2,000 mm, Overall weight: 2,750 kg, Displacement volume: 23 cm³, Ejector force: 26,000 N, Type of input current: three-phase, Ejector stroke: 100 mm, Clearance between the columns: 280 mm, Plate width: 460 mm, Plate length: 450 mm, Clear span: 530 mm, Input frequency: 50 Hz, Input voltage: 400 V, Equipment: Documentation/Manual, injection moulding machine DEMAG Extra 35/280-80 warehouse no.: 503175 manufacturer: DEMAG type: concept 35-280-80 controller: NC4 year of construction: 2004 technical data clamping unit clamping force: 350 kN distance between tie-bars h x v: 280 x 280 mm size of mould plates h x v: 460 x 450 mm min. mould height: 180 mm max. open daylight: 530 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 26 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm weight of mould: 230 kg technical data injection unit screw diameter: 18 mm swept volume: 23 ccm injection pressure: 2868 bar screw length: 20 l/d screw stroke: 90 mm plasticising rate: 3 g/s PS injection rate into the open: 68 g/s PS C0Sq2I72Cw number of heating zones: 4 nozzle stroke: 170 mm measures & weight measures of machine l x w x h: 3.42m x 1.38m x 2m total weight: 2750KG equipment included screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A

Condition: excellent (used), Year of construction: 2012, Machine number:220683 Designation: 320 C 500 - 170 0001/000 CG series 0006/090 320 C 500 - 170 0060/035 Thermoplastic cylinder cpl. 35 mm highly wear-resistant 0061/010 Standard worm gear coupling Coupling geometry double edge 0131/005 Selogica direct control unit 0132/006 Hydraulic system with 2 control pumps 0134/000 Anniversary model GOLDEN EDITION 0135/001 Thermoplastic processing 0220/035 Open nozzle 35 mm 0300/000 Nozzle tip for open nozzle 0320/000 Heating band for open nozzle 0356/011 Clamping plate set 320 central Ø 125 mm 0361/011 Connection for blow-out device 1 0361/012 Connection for blow-out unit 2 0375/000 Selector unit incl. connection 0391/000 Continuous oil cooling and filtration 0412/002 Electric conveyor belt 0424/002 Preparation for INTEGRALPICKER V 0425/005 Robot system interface (to EUROMAP 67), 50-pin 0437/010 OPC-UA host computer interface 0454/003 Interface printer serial USB 0455/005 CompactFlash interface for data record storage 0455/006 Operating authorization with chip card according to EUROMAP 65 0493/000 Interface coloring device 0525/001 Machine-related cooling circuits manually adjustable 0555/001 Extended monitoring equipment package 0555/002 Equipment package extended travel movements 0555/003 Production control equipment package 0555/005 Optimization / operating aids equipment package 0555/006 Quality assurance equipment package 0555/007 Documentation equipment package 0592/003 CD Operating instructions and spare parts list 0600/006 Without granulate container 50 L 0600/007 Without cooling water distribution for tool 0605/003 Oscillating elements 0605/005 Connection ejector plate fuse 0605/006 Ejector quick-release coupling 0605/007 Water-cooled switch cabinet 0605/008 Socket outlet vert. 1 CEE,1 Schuko Fzjcqxc 0605/009 Hydraulic ejector 0605/021 Protective device open at the top 0660/000 Control extension for special signals 0690/001 Machine equipped with INTEGRALPICKER

Condition: excellent (used), Year of construction: 2012, ARBURG A 320 C 500-170 GE Integralpicker V (S&P 3753) year: 2012 Operating hours: 56,000 Stunden Screw: 35 mm Injection pressure: 1470 bar Stroke volume: 115 cm³ Gxcyr9I Clamping Force: 50 t Tie bar distance: 320 x 320 mm Mould installation height min.: 200 mm Plate distance max.: 550 mm Dimensions: 3200 x 1500 x 2200 mm Eeight: 2370 kg Price: € 23.800,00 contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2005, Operating hours: 74,968 h, Clamping force: 800,000 N, Screw diameter: 40 mm, Total height: 2,100 mm, Overall weight: 3,180 kg, Total length: 4,240 mm, Total width: 1,600 mm, Displacement volume: 188 cm³, Ejector force: 40,000 N, Type of input current: three-phase, Ejector stroke: 175 mm, Clearance between the columns: 370 mm, Plate width: 570 mm, Plate length: 570 mm, Clear span: 750 mm, Input frequency: 50 Hz, Input voltage: 400 V, Equipment: Documentation/Manual, injection moulding machine ARBURG Allrounder 370C 800-250 warehouse no.: 503419 manufacturer: ARBURG type: Allrounder 370 C 800-250 controller: Selogica year of construction: 2005 operation hours: 74968 h technical data clamping unit clamping force: 800 kN distance between tie-bars h x v: 370 x 370 mm size of mould plates h x v: 570 x 570 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 175 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 40 mm swept volume: 188 ccm injection pressure: 1820 bar screw length: 18 l/d screw speed: 57 min screw torque: 450 N plasticising rate: 202 g/s PS number of heating zones: 4 nozzle stroke: 240 mm measures & weight measures of machine l x w x h: 4.24m x 1.6m x 2.1m total weight: 3180KG Dpsnix equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. water flow regulator Machine without Handling machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67

Condition: good (used), Year of construction: 2004, 1x used Arburg 320C 600-250 Ma-no.195978 year of construction: 11/2004 Auger: 30mm Uez2Hi92Oj The machine is immediately available!

Condition: excellent (used), Year of construction: 2016, DR.BOY 55 A DUROPLAST (7.278 h) (S&P 3725) Year: 2016 Operating hours: 7.278 h Screw: 32 Duroplast mm Injection pressure: 2127 bar Ugf3Kgiaxd Injection volume: 96 ccm Clamping force: 55 t Tiebare distance: 360 x 335 mm Mouldheight: 250 mm Daylight max.: 650 mm Size: 3200 x 1200 x 2000 mm Weight: 2430 kg Power: 11 kW Price: € 26.800,00 contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2008, Operating hours: 49,673 h, Clamping force: 800,000 N, Screw diameter: 35 mm, Total height: 2,000 mm, Injection pressure: 2,429 bar, Overall weight: 6,500 kg, Total length: 5,350 mm, Total width: 1,700 mm, Displacement volume: 154 cm³, Installation height: 300 mm, Ejector force: 22,000 N, Type of input current: three-phase, Ejector stroke: 100 mm, Clearance between the columns: 520 mm, Plate width: 640 mm, Plate length: 740 mm, Clear span: 790 mm, Input frequency: 50 Hz, Equipment: Documentation/Manual, injection moulding machine KRAUSS MAFFEI KM 80-380 EX warehouse no.: 503232 manufacturer: KRAUSS MAFFEI type: KM 80-380 EX controller: MC5 year of construction: 2008 operation hours: 49673 h Czwyl2Uays technical data clamping unit clamping force: 800 kN distance between tie-bars h x v: 520 x 420 mm size of mould plates h x v: 640 x 740 mm min. mould height: 300 mm max. open daylight: 790 mm ejector stroke: 100 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 2429 bar screw length: 23 l/d screw speed: 477 min injection rate into the open: 289 g/s PS number of heating zones: 5 measures & weight measures of machine l x w x h: 5.35m x 1.7m x 2m total weight: 6500KG equipment included screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB Schuko-socket 10A mould heating 24x

Condition: good (used), Year of construction: 2008, Operating hours: 59,283 h, Functionality: fully functional, Clamping force: 550,000 N, Screw diameter: 38 mm, Total height: 2,040 mm, Overall weight: 2,250 kg, Total length: 3,250 mm, Total width: 1,090 mm, Displacement volume: 136 cm³, Ejector force: 20,000 N, Type of input current: three-phase, Ejector stroke: 80 mm, Clearance between the columns: 360 mm, Input voltage: 400 V, Frequency: 50 Hz, Equipment: Type Plate Available, injection moulding machine Dr. BOY 55 A warehouse no.: 503447 manufacturer: BOY type: 55 A controller: Procan year of construction: 2008 operation hours: 59283 h technical data clamping unit clamping force: 550 kN distance between tie-bars h x v: 360 x 335 mm min. mould height: 250 mm max. open daylight: 650 mm opening stroke: 400 mm ejector stroke: 80 mm ejector force: 20 kN technical data injection unit screw diameter: 38 mm Czwuuu7Wxk swept volume: 136.1 ccm injection pressure: 1508 bar screw length: 17 l/d screw stroke: 120 mm screw speed: 325 min screw torque: 390 N plasticising rate: 130 g/s PS number of heating zones: 5 nozzle stroke: 210 mm measures & weight measures of machine l x w x h: 3.25m x 1.09m x 2.04m total weight: 2250KG equipment included screen text german machine incl. water flow regulator Anti vibration mounts

Condition: good (used), Year of construction: 2008, Operating hours: 53,460 h, Functionality: fully functional, Clamping force: 550,000 N, Screw diameter: 38 mm, Total height: 2,040 mm, Overall weight: 2,250 kg, Total length: 3,250 mm, Total width: 1,090 mm, Displacement volume: 136 cm³, Ejector force: 20,000 N, Type of input current: three-phase, Ejector stroke: 80 mm, Clearance between the columns: 360 mm, Input voltage: 400 V, Frequency: 50 Hz, Equipment: Type Plate Available, injection moulding machine Dr. BOY 55 A warehouse no.: 503448 manufacturer: BOY type: 55 A controller: Procan year of construction: 2008 operation hours: 53460 h technical data clamping unit clamping force: 550 kN distance between tie-bars h x v: 360 x 335 mm min. mould height: 250 mm max. open daylight: 650 mm opening stroke: 400 mm ejector stroke: 80 mm ejector force: 20 kN technical data injection unit screw diameter: 38 mm swept volume: 136.1 ccm injection pressure: 1508 bar screw length: 17 l/d screw stroke: 120 mm screw speed: 325 min Dpseo2 screw torque: 390 N plasticising rate: 130 g/s PS number of heating zones: 5 nozzle stroke: 210 mm measures & weight measures of machine l x w x h: 3.25m x 1.09m x 2.04m total weight: 2250KG equipment included screen text german machine incl. water flow regulator Anti vibration mounts

Condition: excellent (used), Year of construction: 2009, Operating hours: 70,171 h, Functionality: fully functional, Clamping force: 900,000 N, Screw diameter: 38 mm, Total height: 2,000 mm, Injection pressure: 2,060 bar, Overall weight: 6,700 kg, Total length: 4,400 mm, Total width: 1,500 mm, Displacement volume: 38 cm³, Ejector force: 40,000 N, Type of input current: three-phase, Ejector stroke: 130 mm, Plate width: 740 mm, Plate length: 680 mm, Clear span: 800 mm, Input frequency: 50 Hz, Input voltage: 400 V, Equipment: Documentation/Manual, injection moulding machine ENGEL VICTORY 80-90 tech warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h technical data clamping unit clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm ejector stroke: 130 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit Dprjc7 screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar screw length: 19 l/d screw stroke: 100 mm screw speed: 360 min injection rate into the open: 78 g/s PS number of heating zones: 4 nozzle stroke: 230 mm measures & weight measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x

Condition: excellent (used), Year of construction: 2012, Operating hours: 47,142 h, Functionality: fully functional, Clamping force: 1,000,000 N, Screw diameter: 35 mm, Total height: 1,700 mm, Injection pressure: 2 bar, Overall weight: 5,280 kg, Total length: 4,400 mm, Total width: 1,620 mm, Displacement volume: 144 cm³, Clearance between the columns: 470 mm, Plate width: 637 mm, Plate length: 637 mm, Mold height (min.): 250 mm, Opening stroke: 350 mm, Input voltage: 400 V, technical data clamping unit clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm opening stroke: 350 mm ejector stroke: 175 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 760 kg technical data injection unit screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 150 mm screw torque: 380 N plasticising rate: 20 g/s PS injection rate into the open: 113 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 4.4m x 1.62m x 2m total weight: 5280KG equipment included screen text german CEE-socket 16A Dpri3B air valve 1x machine incl. water flow regulator machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety interface for dosing unit interface USB Schuko-socket 10A mould heating 6x Videos

Condition: excellent (used), Year of construction: 2010, Operating hours: 54,863 h, Functionality: fully functional, Clamping force: 7,000,000 N, Screw diameter: 30 mm, Total height: 2,600 mm, Injection pressure: 1,066 bar, Overall weight: 6,200 kg, Total length: 3,400 mm, Total width: 1,800 mm, Displacement volume: 99 cm³, Ejector force: 20,000 N, Type of input current: three-phase, Ejector stroke: 105 mm, Plate width: 590 mm, Plate length: 320 mm, Opening stroke: 305 mm, Input voltage: 400 V, Rotary table diameter: 1,200 mm, Equipment: Documentation/Manual, injection moulding machine ENGEL insert 200H-70 warehouse no.: 503444 manufacturer: ENGEL type: insert 200H-70 controller: CC200 year of construction: 2010 operation hours: 54863 h technical data clamping unit clamping force: 700 kN size of mould plates h x v: 590 x 320 mm min. mould height: 270 mm max. open daylight: 570 mm opening stroke: 305 mm round table diameter: 1200 mm Cxeelcg2Rm ejector stroke: 105 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1066 bar screw length: 17 l/d screw stroke: 140 mm screw speed: 480 min injection rate into the open: 204 g/s PS number of heating zones: 4 nozzle stroke: 530 mm measures & weight measures of machine l x w x h: 3.4m x 1.8m x 2.6m total weight: 6200KG equipment included screen text german screen text english CEE-socket 16A machine with rotary index table machine incl. water flow regulator Anti vibration mounts electric interface for handling units according to Euromap 12 interface EUROMAP 67 interface for handling mould heating 4x