Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 007707133, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Boln Uxswhdnzol Rowl TECHNICAL DETAILS Tool diameter: 550 mm Saw blade speed: 2,800 rpm MACHINE DETAILS Total weight: 1,400 kg Air requirement: 200 Nl/min Operating pressure: 6 bar Further information according to the manufacturer - without guarantee Control: R 700 Angle adjustment: 45°-90° Cutting length: min. 3,700 mm Dimensions: 5.4 x 1.4 x 1.9 m at a cutting length of 3,700 mm Weight: 1.4 t

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds Bslswgi Sijn Uxl Rowl - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, Year of construction: 1989, saw blade diameter 420 mm cutting length 6000 mm 150 mm Bwolowfyqtjn Uxl Rsl turning speeds 2800 U/min engine output je 4,0 kW connected load 8,0 kW weight of the machine ca. 1,8 t Dimensions (LxWxH) 7,0 x 1,5 x 1,5 m Double miter saw Minimum cutting length at 90° or 45°: 350mm Inward tilt range: 90° - 45° (up to 22.5° manually with digital display) Inward tilt range: 90° - 45° pneumatically Compressed air connection: 7 bar Including 3 spare saw blades

Condition: good (used), Year of construction: 2011, Functionality: fully functional, Federhenn's fully automated rod machining center performs all the machining required for windows and front doors in a process-optimized manner. Capacity: approximately 100 rods per 8 hours. Bwelnewgd Acs Uxl Rol

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, WEGOMA SD25 with 500-grit saw blade Bsln Uowf I Igexl Rewl BECKHOFF C2001 controller with pneumatic tilting. Fully functional

Condition: used, saw blade diameter 400 mm cutting diameter 130 mm stroke 135 mm mitter cutting - all-position 0-45 ° turning speed range 1420 / 2840 U/min capacity 45 degrees: square 110 mm capacity 45 degrees: flat 50 x 240 mm capacity 90 degrees: flat 95 x 240 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm voltage 400 V Bwsln Usd Scrrsxl Rol total power requirement 3,7 / 4,5 kW weight of the machine ca. 600 kg dimensions of the machine ca. 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm Boln Uxsv U Dluol Rswl weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Year of construction: 1995, Condition: ready for operation (used), Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible. Beln Uxlewfg E Re Rswl

Condition: used, Rotox water slot cutter for aluminum and PVC profiles Bwjln Uxsv Tx S Hsl Rol

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, spindle speed (max.): 24,000 rpm, travel distance X-axis: 4,175 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle motor power: 8,500 W, ZC 4035 3,5 Axis Aluminum Machining Center - Robust mechanical structure suitable for high speed - Axis speeds with an average of 95 m/d - Profiling length 4175 mm - Machinable profile section size 300 x 300 mm - Number of clamps 6 pieces - Spindle motor 8.5 kW 24,000 rpm - The number of magazine sets is 8 - Ø 200 mm saw- Mitsubishi PLC control unit - Vices positioned by the X-axis - Automatic tool recovery in case of power failure Design - Mechanical structure that can process aluminum and steel profiles at high speed and high quality - Stress relieved cast and welded parts to ensure consistent high speed accuracy - Axis speeds with an average of 95 m/min. - Ability to perform milling, notching, drilling, threading, countersinking, cutting, etc. - Profile machining length 4175 mm - Machinable profile section size 300 x 300 mm - Automatic lubrication system - Coolant spray system Control Panel - Versatile adjustable, ergonomic kiosk - 19'' screen - User-friendly Kaban interface with Windows-based, easily adjustable parametric structure - Compatibility with .NCX extension software - High performance 3 axis Mitsubishi PLC control unit- Optical communication and command increment - Communication via Ethernet- Working with G-Code - Data transfer via USB and COM Port Spindle - 8.5 kW / 24,000 rpm - HSK F63 tool holder - Encoder - Temperature control - Liquid cooling - Tool cooling Magazine - 8 tool holder capacity - Tool change in up to 8 seconds - Ø 200 mm saw can be attached Profile Supports Bsln Uewfyuxjxl Rewl - Automatic profile support system on both sides - Suitable for working with long profiles Vices - Narrow, designed vices protected against external factors - 6 standard clamps - Vices positioned by the X-axis - Profile sliding comfort on the vise surface with the roller system - Three different clamping forces according to the profile thanks to the pressure regulator Safety - Ability to continue from where it left off in case of power failure with the UPS system - Auto-recovery function that sends the spindle to the safe zone - Working safety with cover and safety barriers Technical Support - Periodic maintenance reminder function - Service support with remote connection

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 101.5, Symatec corner polishing machine type Trimer 2. • equipped / programmed for VEKA profiles 82 Softline Bsln Ujwb Eqksxl Rowl

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm cutting lenght max. 4000 mm saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min coolant Bwsln Uxsd Il A Isl Rol capacity 45 degrees: square 95 mm capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment

Condition: used, Year of construction: 2008, AUTOMATIC LINE FOR THE PRODUCTION OF PVC WINDOWS COMPOSED OF: DOUBLE CUTTING CENTRE AND COMPLETE PROFILE MACHINING Bwolnswd S Afj Uxl Rel AUTOMATIC UNLOADING SYSTEM IN THE FINISHED PRODUCT WAREHOUSE SUPPLY WAREHOUSE Automatic loader with a useful length of 6500 mm (more optional) Loading capacity of up to 12 profiles (more optional) and 1 profile in operation Profile gripper on 3 CNC servo axes: numerical positioning sev width and height of the profile MACHINING AND SAWING UNIT 3 saw motors - cutting movements on servo-assisted axes - adjustable from the control Possibility of V-cutting - cutting movements on CNC axes, speeds and positions adjustable from the control A high-performance machining unit on 2x3 CNC axes: operations can be performed from top to bottom and from front to back simultaneously and independently The machined profile is automatically removed from the work center and sorted into a compartment or wagon frame, removed according to the welding machine request X & Y controlled transport system with servomotors 0-position sliding system

Condition: good (used), Year of construction: 2009, Bürck + Lang underfloor saw with automatic feed, profile clamping device, lateral adjustment options for the cutting width, fully functional Bwjln Uxswb H T Tel Rel

Condition: as good as new (ex-display), End Milling Machine Bwsln Uxsrcfumsl Rsl

Condition: good (used), Copy milling machine Window router Rotox Bwoln Uxerwfnzel Rol Type EKF 3 with 3 milling spindles length 800 mm width 650 mm height 1500 mm

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, For sale is a complete glass bonding machine for components measuring 4m x 3.5m. Bwjlnjwbcy Ao Uxl Rjl See the pictures for more details. The system can be viewed in operation by appointment. Dismantling by the customer. System availability: Immediately

Condition: good (used), Year of construction: 1984, Functionality: fully functional, Double miter saw DGL 400 Manufacturer: Rapid Type: DGL 400 Year: 1984 with Ferrocontrol control Saw blade: 500 mm Pivotable up to 45° Bwoln Uxlev T R E Ss Rjl

Year of construction: 2008, Condition: used, PROFTEQ 4-HEAD WELDING LINE FOR PVC WINDOWS Bwjlnewd Suuo Uxl Rel

Condition: excellent (used), Year of construction: 2014, Ruchser glazing press RU-HSK-83°/90°- 2.5 L in very good condition, sturdy design, tiltable and infinitely height adjustable Belnswb H Taj Uxl Rewl

Year of construction: 2019, Condition: as good as new (ex-display), Complete PVC Window Line 60 Windows Beln Uoux Aqoxl Rswl Consisting of: Double Mitre Saw DS-110/3.5M End Miller AKF-210 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Two Head Welder WSA-2 LV, 0.2-2.0mm restrictions Glazing Bead Cutting Saw GLSP-200E with stop system

Year of construction: 2018, Condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Adjustable table height Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 30mm HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Variable measuring stick 3.0m Bwolneuxxxs Uxl Rel Support for measuring stops 3.0m

Year of construction: 2017, Condition: as good as new (ex-display), Complete PVC Window Line 30 Windows Consisting of: Mitre Saw GS-400/M with length stops End Miller AKF-210 Sight surface groover 7405 Handle Drilling and Routing Machine KF-130S with self centring Bweln Uoux Adoxl Rjl Waterslot Drainage Router SK-8/3 Single Head Welder WSA-1E, 2.0mm restrictions Glazing Bead Cutting Saw GLSM-200E

Year of construction: 2021, Condition: as good as new (ex-display), Automatic Double Screw Unit Bwjln Usuxyyjxl Rol SE5 S With automatic screw feeding Head only bench mount Automatic working operations Depth stop control,...

Year of construction: 2020, Condition: as good as new (ex-display), Glazing & Control Press Bweln Uouxy Esxl Rol VK-3522 Adjustable height pneumatic 500 mm Clamping height: 2.200 mm, Clamping width: 3.000 mm Pneumatic clamping press beam Clamping pads: 120 mm width L= 3.900 x W= 1.050 x H= 2.500 mm