Used Agi for sale (7,001)

Condition: used, Year of construction: 2007, Functionality: fully functional, Cliché washing machine for sale Bmmkbse0Wq Process steps: cleaning, rinse and dry The plate is automatically drawn into the processor by the dragging rolls Transport speed and temperature controlled by the computer Equipped with two brushes with alternative and floating movement Gas aspiration inside the tank via two blowers Possibility to connect the unit directly to your exhaust systems Temperature inside the solvent drum via the heater Max plate width 920 mm Min plate length 220 mm (with sticky plate any size) Drum recycle solvent capacity 35 Power 1,5 Kw Electrical 230V MONO 50/60HZ Dimensions 1830 x 1440 x 1060 mm

Condition: used, Year of construction: 2014, Overview This ETD ISO AGI brewing system was manufactured in 2014 and has a capacity of 3,000 liters. It is heated by steam and allows for temperature steps during mashing. The seller is offering the line for sale due to going out of business. The entire line is still in the owner's factory and can be inspected on site. The included steam boiler (Tecnivap Alfa 200) was last functional, but the seller cannot guarantee its current condition. Maintenance and inspection are recommended. Technical details Capacity: 3,000 L Heating system: Steam (certified installation required) Average filtration time: 1-2 hours for 2,500 L Scope of delivery  Brewhouse | ETD | ISO AGI | 2014 2x isobaric fermenter Helical pump Steam boiler | Tecnivap | Alfa 200 Isothermal storage tank for matured beer Steam installation Wort cooler Reverse osmosis system Boiler water tank Dosing pump Drcoa9

Condition: good (used), Year of construction: 1984, Used shear from Sagita Model 3110 Capacity 3100 x 10 mm Adjustable backgauge Including front supports Drh8Ej Machine tested, will be sold as traded in

Condition: excellent (used), Agie Wire EDM Model: AGIE Cut Classic V3 Control: AGIE B3A0Adrdes X – axis Travel: 500mm Y – axis Travel: 350mm Z- axis Travel: 426mm Workpiece Length: 1050mm Work piece width: 650mm Work piece height: 420mm Work piece weight: 800 kgs Dimensions: 1940 x 2300 x 2600mm high Weight: 3460 kg

Condition: used, Year of construction: 2005, x-axis 350 mm Dray9Z y-axis 250 mm z-axis 350 mm table length 600 mm table width 450 mm workpiece weight 400 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2010, Wire erosion / EDM Travel distance X: 800 mm Travel distanceY :550 mm Travel distance z: 525 mm max. workpiece size X: 1300 mm max. workpiece size Y: 1000 mm max. workpiece size Z: 510 mm max. workpiece weight: 3000 kg with AWF ( Automatic Wire Feeding ) U / V axis: ±70 mm submerged Cd7Zb3Y0A0 cooling unit Available wire diameters (Standard): 0.15 – 0.33 mm Permissible weight and types of spools (ISO): 25 kg Tank capacity: 1600 l Machine weight: approx. 6000 kg​

Year of construction: 2017, Condition: ready for operation (used), General Data Measurements width 2640 mm Measurements depth 2600 mm Measurements height 2340 mm Machine weight 3300 kg Control Unit Brand CHARMILLES Cazgncjyi0 Main Drive Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm This 5-axis AgieCharmilles CUT P 550 wire EDM machine was manufactured in 2017. Consider the opportunity to buy this AgieCharmilles CUT P 550 wire EDM machine. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 1997, x-travel 350 mm y-travel 250 mm z-travel 256 mm max. size of workpiece 750 x 550 x 250 mm U-axis +/- 70 mm V-axis +/- 70 mm rapid traverse X/Y/Z axis 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis 0,6 m/min max. concentricity 30° / 100 mm control AGIEVISION Drgqvt wire dia. 0,1 - 0,33 mm speed of wire 60 - 300 mm/sec wire retraction halbautomatisch total power requirement 9,1 kVA weight of the machine ca. 3,6 t dimensions of machine L x W x H 2,21 x 2,21 x 2,22 m

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture 2015 Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V-O Generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm (including KIT 70) Water bath machine with automatic wire threading With automatically lowering container (accessible from two sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D Including glass scales for the X and Y axes VISION 5 control system 15" LCD color screen, keyboard, and mouse Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg Includes a 6-month warranty We completely overhaul and test the machine. A customized test cut is also available. We also offer on-site commissioning and training for this machine. Drgxgb

Condition: excellent (used), Year of production: 2013 Drayf2 Control: System 6000 Touch Max sheet width: 2540 mm Max thickness: 2.25 mm Machine weight: 2500 kg Quantity: 2 pieces! - (PRICE PER PIECE)!!!!!

Condition: excellent (used), Year of construction: 2014, Machine Type: CNC EDM Hole Drilling Machine Year of Manufacture: 2014 Manufacturer: GF AgieCharmilles X-Axis Travel: 300 mm Y-Axis Travel: 200 mm Z-Axis Travel: 300 mm Table Size: 500 x 300 mm Maximum Workpiece Weight: 200 kg Electrode Diameter Range: 0.3 mm – 3.0 mm Max Drilling Depth: 300 mm Drilling Method: High-speed EDM (Electrical Discharge Machining) Cc9X73228K Generator Type: AGIE EDM Generator Input Power Supply: 400V / 50-60 Hz CNC Control: User-friendly CNC interface Functions: Automatic electrode positioning, drilling cycles, spark parameter adjustment Dielectric System: Integrated with filtration Cooling System: Built-in cooling unit Machine Dimensions: 1,500 x 1,200 mm Machine Weight: ~1,500 kg

Condition: used, Year of construction: 2008, Wire erosion / EDM Travel distance X: 800 mm Travel distanceY :500 mm Travel distance z: 525 mm max. workpiece size X: 1300 mm max. workpiece size Y: 1000 mm max. workpiece size Z: 500 mm max. workpiece weight: 3000 kg Drh2Yl with AWF ( Automatic Wire Feeding ) submerged Agievision 5 control unit

Condition: ready for operation (used), Year of construction: 2000, General Data Gnxi2C Measurements width 550 mm Measurements depth 750 mm Measurements height 250 mm Machine weight 200 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 Y-Axis Movement 250 Z-Axis Movement 256 This 3-axis AGIE AGIECUT CLASSIC S erosion machine was manufactured in 2000. It has impressive axis movements with x=350mm, y=250mm, and z=256mm, providing ample flexibility for handling erosion tasks. The machine accommodates a maximum piece size of 750mm in length, 550mm in width, and 250mm in height, and it can manage weights up to 200kg. The dimensions and capabilities make it suitable for a wide range of erosion processes, ensuring detailed and precise outcomes. The AGIE AGIECUT CLASSIC S machine we have for sale is designed for robust performance and precision. Contact us for more information about this erosion machine. Application Types EDM

Year of construction: 2014, Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm Ccaj9Yyilz MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Condition: refurbished (used), Year of construction: 2016, GF AgieCharmilles Progress VP3 Year of manufacture 2016 Travels: X = 500 mm, Y = 350 mm, Z = 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.20 µm Caqkllukzq Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient Setup AGIE IPG-VP Generator AGIEVISION 5 Control System Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled upon receipt of the order. You receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training.

Condition: refurbished (used), 50m3 stainless steel tank The main tank is made of stainless steel with a cylinder thickness of 3mm, with styrofoam insulation covered with a carbon steel sheet, and the second layer covered with a stainless steel sheet. Qsmrt Dim. 4.20x 5.80m Cyllinder thickness 3mm Bottom thickness 4mm 1.5 kW agitator The tanks are very clean inside, they were used in the food industry. 3 units available!

Condition: good (used), Year of construction: 2007, AgieCharmilles FI 240 ALP (2007) Technical Specifications of AgieCharmilles FI 240 ALP Wire Cutter (2007) • Manufacturer: AgieCharmilles • Model: FI 240 ALP • Year of Manufacture: 2007 • Machine Type: Wire EDM (Electrical Discharge Machining) Technical Data: • X-Axis Travel: 350 mm (13.78”) • Y-Axis Travel: 250 mm (9.84”) • Z-Axis Travel: 256 mm (10.08”) • U/V Axis Travel: ± 70 mm (± 2.76”) • Max Workpiece Dimensions: 750 x 550 x 250 mm (29.53” x 21.65” x 9.84”) • Max Workpiece Weight: 200 kg (440 lbs) • Wire Diameter: 0.1 – 0.3 mm (0.004” – 0.012”) Drgvtn • Max Taper Angle: ±30° at 100 mm height (±1.18” at 3.94”) • Wire Spool Capacity: 25 kg (55 lbs) • Generator Type: AgieCharmilles ALP (Adaptive Logic Pulse) • Surface Finish (Ra): Down to 0.2 µm • CNC Control: AgieCharmilles CNC • Power Supply: 400V, 50/60 Hz • Machine Dimensions: Approx. 2,000 x 2,000 x 2,000 mm (78.7” x 78.7” x 78.7”) • Machine Weight: Approx. 2,800 kg (6,170 lbs)

Year of construction: 2016, Condition: ready for operation (used), General Data Machine weight 4200 Cg73Jeoiww Main Drive Number of axis 4 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Workpiece Workpiece X 1000 mm Workpiece Y 700 mm Workpiece Z 400 mm Table Outer length 800 mm Outer width 600 mm This 4-axis AgieCharmilles FORM 30 die-sinking EDM machine was manufactured in 2016. It features X, Y, and Z-axis movements of 600 mm, 400 mm, and 400 mm respectively, and a C axis for enhanced versatility. The table measures 800 x 600 mm, supporting workpieces up to 1000 x 700 x 400 mm. Weighing 4200 kg, consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for further details regarding this machine. Application Types EDM

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS CROSS TABLE VERTICAL MACHINING CENTRE  X-AXIS TRAVEL: 1000 mm Y-AXIS TRAVEL: 550 mm Z-AXIS TRAVEL: 550 mm SPINDLE: 8000 rpm; 7,5 - 11 kW; ISO 40 TABLE SIZE: 1200 x 450 mm TOOL MAGAZINE: BASKET-TYPE ; 20 POS Qzewsvol CONTROL UNIT: HEIDENHAIN TNC 410 WEIGHT: 5150 Kg OVERALL DIMENSIONS: 2800 x 2200 x 2700 mm ACCESSORIES: PORTABLE HANDWHEEL

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, GF AgieCharmilles CUT 2000 Year of manufacture 2012 Equipped with AWC (Automatic Wire Changer) for the use of two different wire diameters Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Drgw9F Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm Water bath machine with automatic wire threading With automatically lowering container (accessible from two sides) Including AGIEJOGGER handbox for Convenient setup Including AGIESETUP 3D Including glass scales for the X and Y axes VISION 5 control system 15" LCD color screen, keyboard, and mouse Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg Including a 6-month warranty We completely overhaul and test the machine. A customized test cut is also available. We also offer on-site commissioning and training for this machine.

Year of construction: 2007, operating hours: 92,931 h, Condition: ready for operation (used), General Data Machine weight 3700 Additional Equipment Deionisation system is optional This AGIE Agiecut Challenge V2 was manufactured in 2007. A robust wire EDM machine, it features a weight of 3700kg, operates on 3x400V, and has a power output of 9kVA. With 92931 operating hours and 28581 eroding hours, it's a testament to its durability and performance. If you are looking to get high-quality EDM capabilities, consider the AGIE Agiecut Challenge V2 machine we have for sale. Contact us for more information. Application Types EDM Bsb3Vcmsjhe

Year of construction: 2016, operating hours: 7,800 h, Condition: ready for operation (used), General Data Machine weight 2400 kg Additional Equipment Tool Changer: 64 slots Dqtndt Cooling Unit: Cooling capacity 10.2 kW This 3-axis AgieCharmilles FORM 200 die-sinking EDM machine was manufactured in 2016. It features a 64-slot tool changer, a cooling unit with a 10.2 kW capacity, and can handle workpieces up to 500 kg. Optimized for energy efficiency and equipped with a user-friendly CNC system, it's ideal for precise tool and mold making. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 200 machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2008, Condition: ready for operation (used), General Data Machine weight 3000 Main Drive Number of axis 3 Workpiece Workpiece X 350 mm Workpiece Y 250 mm Br0Up7Ipe0K Workpiece Z 220 mm This 3-axis AGIE CUT 20 wire EDM machine was manufactured in 2008. It features a working area of 350mm (X) x 250mm (Y) with a maximum machining height of 220mm in Z. If you are looking to get high-quality EDM capabilities, consider the AGIE CUT 20 machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2012, Condition: ready for operation (used), General Data Machine weight 2850 Main Drive Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Workpiece Workpiece Z 400 mm G8Y7Mvfmc Workpiece weight 1200 kg This 3-axis AgieCharmilles CUT 300 wire EDM machine was manufactured in 2012. It features a high-frequency EDM generator, CNC control, and supports a wire diameter range of 0.15 to 0.33 mm. Ideal for precise cutting of hardened steel, copper, and ceramics, it has a maximum workpiece weight of 1,200 kg and includes a cooling unit. If you are looking to get high-quality cutting capabilities, consider the AgieCharmilles CUT 300 machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2022, Condition: ready for operation (used), General Data Machine weight 2300 kg Main Drive Number of axis 3 Additional Equipment Tool Changer: 64 slots This 3-axis die-sinking EDM machine manufactured in 2022 features a robust 350 x 250 x 300 mm working area and can handle a maximum workpiece weight of 500 kg. Equipped with a 64-slot tool changer and an energy-efficient cooling system with a 10.2 kW capacity, it ensures optimal performance and durability. Ideal for creating precise molds and tools, this AgieCharmilles FORM P 350 is a top choice for high-quality die-sinking capabilities. Contact us for more information. Dqtneh Application Types EDM