Used Wire EDM machines with x-travel of 500-699mm for sale (61)

Condition: good (used), Year of construction: 2006, General Data Measurements width 2610 Measurements depth 3270 Measurements height 2240 Machine weight 2600 Control Unit Brand FANUC Model System 16-WB Main Drive Max taper angle ± 30 degrees/80 mm (option ± 45 degrees/40 mm) Number of axis 5 Movement X-Axis Movement 520 mm Y-Axis Movement 370 mm Z-Axis Movement 300 mm (275 mm in water bath) U-Axis Movement ± 60 mm W-Axis Movement ± 60 mm Workpiece Workpiece X 790 mm Workpiece Y 730 mm Workpiece Z 275 mm Workpiece weight 650 kg (with coaxial spindle), 450 kg (with water bath) Table Outer length 750 mm Outer width 590 mm Additional Equipment Bsg8Qfdp8A8 Bedra wire unwinding device BAS 45/100E (to the left of the machine), capable of handling wire spools weighing up to 45 kg This 5-axis FANUC Robocut Alpha 1C erosion machine was manufactured in 1997. It features a coordinate travel of 520 x 370 mm on the X and Y axes, and a Z-axis adjustment of 300 mm. The machine can handle a maximum workpiece weight of 650 kg and offers a rapid traverse of 900 mm/min. Ideal for precision erosion tasks, the FANUC Robocut Alpha 1C machine we have for sale. Contact us for further details regarding this erosion machine.

Condition: excellent (used), Year of construction: 2019, operating hours: 540 h, Functionality: fully functional, machine/vehicle number: 396.900.217.2416, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 3,400 mm, workpiece height (max.): 350 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, input voltage: 400 V, worktable length: 1,030 mm, worktable width: 800 mm, input frequency: 50 Hz, nominal current: 13 A, AGIE CHARMILLES CUT E 600 WIRE ERODER MACHINE Excellent Running Condition, can be inspected under power by prior appointment. Videos available on request. Model - CUT E 600 YEAR 2019 CONTROL - GF Charmilles with tapering facility, cam easy software, 0.1 mm minimum wire capacity, slug jet flush feature. Specifications: WORK AREA 1030 x 800 x 350 mm MAX. PART WEIGHT 1000 kgs LEVEL OF DIELECTRIC MIN./MAX. 0/380 mm AIR SUPPLY PRESSURE 6.5-8 bar AIR MIN FLOW 150 L/min TRAVEL X, Y, Z 600 x 400 x 350 mm Uhbebfnn2T TRAVEL U, V ± 50 mm X, Y, U, V, Z MOVEMENT RESOLUTION 0.1 um SPEED OF AXIS MOVEMENT (XYZ) 0-3 m/min MACHINE DIMENSIONS 2160 x 3400 x 2320 MACHINE WEIGHT 4230 KGS

Condition: refurbished (used), Year of construction: 2008, GF AgieCharmilles Progress V3 Year of manufacture 2008 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm Togmpdrm0 Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achieveable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for comfortable Setting up AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and overhauled after receipt of the order. You receive a 6-month warranty on all machine parts. We are also happy to offer you commissioning and training

Year of construction: 1997, Condition: good (used), control Mitsubishi CNC travel X/Y/Z 500/350/300 mm max. workpiece weight 800 kg Bb7Tt2Ue80 table size 780x630 mm

Condition: good (used), Year of construction: 2007, Functionality: fully functional, A well-maintained Fanuc Robocut Alpha 0iC wire EDM machine is for sale. The year of manufacture is 2007. The Fanuc Robocut is still powered. The EDM machine is ready for use and immediately available. Dqwgt9 Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2008, Fanuc robocut Alpha 1ID in very good condition year of construction 2008 working hours 26222 x,y,z 600 x 400 x 310 mm u,v 200 mm internal dimensions work tray 110 x 80 cm Czunj9Py max. workpiece dimensions 1050 x 775 x 300 mm wire diameter 0.1 mm to 0.3 mm (0.25 present on the machine) automatic wire cutting and feeding up to 16 kg roll of wire incl. all accessories in the photos incl. digital documentation

Condition: good (used), Year of construction: 1999, EDM drilling machine Sodick 1KCN, year of manufacture 1999 Description: - Axis travel X x Y x Z: 200 x 300 x 300 [mm] Sofadvwey - Table size: 250 x 350 [mm] - Max. weight of the workpiece: 100 [kg] - Max. diameter of the electrode: ~ 0.3 ~ 3.0 [mm] - Base area: 860 x 830 x 1990 [mm - Weight: 500 [kg]

Condition: good (used), Year of construction: 2017, The machine is in good technical condition, after prior agreement it is possible to test it. X-axis movement: 400 mm • Y-axis movement: 300 mm • Z-axis movement: 255 mm Toazvcck8 • Max. workpiece weight: 500 kg • Total power consumption: 13 kVA • Control system: Fanuc 31i • U: 120 mm • V: 120 mm

Condition: reconditioned (used), Year of construction: 2021, Functionality: fully functional, GF Machining Solutions CUT P550 Pro Year of manufacture 2021 Uniqua control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Dqxg97 Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface: Ra 0.08 µm Available wire diameters: 0.15 to 0.33 mm Incl. wire cutter Incl. 3D probe Dimensions of the complete system: 2600 x 2640 x 2340 mm Total weight of the system: 3300 kg The machine is still in use by our customer and will be cleaned, serviced and thoroughly tested by us before delivery. You receive a 6-month warranty on the machine. We would be happy to offer to commission the machine for you.

Year of construction: 1999, Condition: good (used), Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm Be8Ymkljsd cooling unit

Condition: used, Year of construction: 2007, Travel distance X: 570 mm Travel distance Y :370 mm Dqrlpj Travel distance z: 350 mm LQ33W CNC Control Linear motor (X, Y, U, V axis) Linear glass scales (X, Y, U, V axis) 3 sided drop-tank 15" TFT screen Super jet AWT (Automatic wire threader) Integrated Heart NC software for generating NC codes Digital PIKA W Plus for super surface finish Dielectric cooling unit Ceramic components

Condition: excellent (used), Year of construction: 2006, mitsubishi FA 20 S year of construction 2006 x,y,z 500 x 350 x 300 mm u,v 32mm 15 degree conical maximum at 100 mm high max. workpiece dimensions 1050 x 800 x 295 mm max. workpiece weight 800 kg automatic cutting and threading chiller wire diameter 0,1 to 0,3 mm ( 0,25 mm available) attachment to straighten the wire drawer cabinet (empty) 2x clamping table documentation machine is connected for inspection Dpkmbp

Condition: excellent (used), Year of construction: 2006, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, Fanuc Robocut alfa-1iC 600 Wire EDM Machine Travels X-550mm Y-370mm Z-310mm, rare version with enlarged tank enabling cutting of large parts. Pbnsumvvi Plugged into power and ready for testing.

Year of construction: 2000, Condition: ready for operation (used), Cutting Erosion Machine MAKINO EU 64 Hgrpi3N X=600 mm Y=400 mm Z=260 mm workpiece dimensions WxDxH max 940x650x260 mm Workpiece weight max 1500 kg Service due before commissioning !!! Current service report from Makino can be sent on request

Year of construction: 2008, Condition: refurbished (used), AGIECUT Challenge V3, Year of manufacture 2008 travels: X= 500 mm, Y= 350 mm, Z= 256 mm travels U/V-axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER- hand box for comfortable set-up Incl. AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and extensively tested by us after receipt of order. Incl. user training at Techma on your overhauled machine Optional: transport, commissioning, training, cooler Dowclbix3X

Condition: good (used), Year of construction: 2013, Only about 11'000 Working hours Dqpqap Datasheet:

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 2,160 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 5,440 kg, table length: 950 mm, net weight: 4,440 kg, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table load: 1,000 kg, input voltage: 380 V, tank capacity: 1,000 l, Equipment: cooling unit, documentation/manual, fridge, Wire EDM machine Manufacturer: GF Machining Solutions Model: CUT E 600 Year of manufacture: 2016 Travels: X / Y / Z: 600 / 400 / 350 (mm) Extras: 16kg spools Condition: Very good and well maintained condition Terms of payment: 100% before disassembly and loading We are a tool shop and are downsizing our production. We bought the machine new in 2016 and it has been in use with us ever since. The machine is under power and will continue to be used. A viewing and trial run are possible. The machine can be handed over at short notice by arrangement. We can also offer the following with a purchase: - Training of your personnel Bhnfg8Op - Cleaning of the machine - Attachment of transport locks - Loading onto the truck - Transportation with our own truck - Unloading at your site - Bringing the machine to your location - Alignment of the machine - Connecting and commissioning

Condition: good (used), Year of construction: 2005, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 570 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 350 mm, workpiece height (max.): 350 mm, workpiece width (max.): 520 mm, workpiece length (max.): 770 mm, net weight: 5,200 kg, Selling our Sodick AQ537L wire EDM machine Machine is in good condition, being sold due to new purchase. YEAR OF MANUFACTURE 2005 Inspection under power possible, test cuts also possible. Accuracy of the machine very good. Cm0Pigcp9W No maintenance backlog, the wire guides, rollers etc. were recently replaced. Due to the linear drives, the machine is very accurate even after years. The many ceramic parts also contribute to accuracy in terms of thermal expansion. Taper deflection in both axes (U and V) +-60mm possible.

Condition: new, The machines of the NeoSpark CNC series are among the most precise wire EDM machines with reciprocal wire guidance on the market. They offer excellent performance when machining electrically conductive materials in mold and tool making. The NeoSpark series is a popular choice for companies that specialize in additive manufacturing and want to separate the finished part from its base plate with high precision. High speed ​​wire cutting guarantees deformation-free and burr-free cutting of even the most delicate 3-D printed metal structures with the best surface quality Ceja8Whv

Condition: used, Year of construction: 2016, travel -x axis 600 mm travel -y axis 400 mm travel -z axis 350 mm max. workpiece weight 1.000 kg wire dia. 0,1 ~ 0,3 mm wire-forward-feed 420 mm/sec Wire Eroding Machine | SODICK - ALC 600 G Dqlxl2 The machine has has approx. 19,000h cutting hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ALC600G | ALC600 G | ALC-600 G | ALC 600G

Year of construction: 2006, Condition: refurbished (used), AGIECUT Challenge 3 eCut Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE generator with eCut technologies for faster and more efficient processing Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of the order. We then put the machine into operation on your premises. You receive a 6-month warranty on the machine. We are happy to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables Ygweo - Clamping devices - Transportation

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, max workpiece dimensions: 800 x 570 x 340 mm Dqkleh

Condition: ready for operation (used), Year of construction: 2018, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 2,160 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 5,440 kg, table length: 950 mm, net weight: 4,440 kg, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table load: 1,000 kg, input voltage: 380 V, tank capacity: 1,000 l, Equipment: cooling unit, documentation/manual, fridge, Wire EDM machine Manufacturer: GF Machining Solutions Model: CUT E 600 Year of manufacture: 2018 Travels: X / Y / Z: 600 / 400 / 350 (mm) Extras: 16kg spools Condition: Very good and well maintained condition Terms of payment: 100% before disassembly and loading We are a tool shop and are downsizing our production. We bought the machine new in 2018 and it has been in use with us ever since. The machine is under power and will continue to be used. Bsbshvffgxi A viewing and trial run are possible. The machine can be handed over at short notice by arrangement. We can also offer the following with a purchase - Training of your personnel - Cleaning of the machine - Attachment of transport locks - Loading onto the truck - Transportation with our own truck - Unloading at your site - Bringing the machine to your location - Alignment of the machine - Connecting and commissioning

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, Charmilles Robofil 440 CCS Year of manufacture 2011 Charmilles Millenium control system Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. Taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cvqokfscym Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2810 x 2240 mm Total weight of the system: 3300 kg The machine is cleaned and overhauled by us after receipt of order and tested for all functions. We are also happy to carry out an individual test cut for you. We offer the following services on request: - Commissioning of the machine at your premises - Warranty of 6 months - Control training - Accessories such as coolers and clamping devices

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, AGIECUT Vertex 3 Year of construction 2010 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 - 0.33 mm Water bath machine with automatic wire threading Cm8Un7Qg3M With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION 5 control unit AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is completely cleaned, overhauled and thoroughly tested after receipt of the order. A laser measurement of the axes is carried out at our premises. We would also be happy to carry out an individual test on the Vertex 3 for you. Incl. user training at Techma on your overhauled machine We are happy to offer you an optional service: - transportation - commissioning - Cooling unit - Clamping devices - Consumables