Used Dorstener Wire Works for sale (55,141)

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Kjdpfx Agjxtwddszjnf

Condition: good (used), Zip Wire closed spiral in spools Kodpfswunmbox Agzonf 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Ksdpfsmk S Slox Agzonf Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled back stop up to 1000 mm Side stops and table extensions Kodpfx Agjxta Uxszjnf Cutting edge lighting Hydraulic shear angle adjustment knife sharpened Weight approx. 6500 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg Kodpfxjq Rxz Ts Agzsnf

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Knsdpof Nku Rsfx Agzjf Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89037, workpiece weight (max.): 13,000 kg, PARALLEL LATHE CWGIIOOE 500x5000mm weight 13000kg. Machine complete with 4 independent jaw self-centering chuck mm 1000. Height of tips mm 500. Distance between tips mm 5000. Kjdovzxatspfx Agzenf

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Ksdpfetr Azkex Agzonf Online production equipment machine testing available The roundness within 0.001

Year of construction: 1989, condition: used, Stop for press brake, edging bench, guillotine shears ... -Spare part: stop bar comes from a Dorstener BBM press brake type: APE80-3050 -Servo motor: manufacturer Stromag Kjdpfx Agegrzu Uszonf -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length unit approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg

Year of construction: 1989, condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from a Dorstener BBM press brake type: APE80-3050 -Piston diameter: approx. 150 mm -Piston rod: Ø 140 mm Knjdpfx Agegrzvnezef -Stroke: 200 mm -Admission piston rod: mm -Number: 2x cylinders available -Price: per piece -Dimensions: 400/380/H825 mm/piece -Weight: 270 kg/piece

Condition: used, Module converter, electronic module Knedpfx Ajfcl H Uegzof -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: used, Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit -Manufacturer: VEM, hydraulic unit from Dorstener APE80-3050 press brake -Drive: VEB type KMER 132 AC P 7.5 kW 1435 rpm -Delivery rate: l/min -Operating pressure: bar Knedpfegtat Uox Agzef -Dimensions: 720/340/H335 mm -Weight: 87 kg

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm -Weight: 8.1 kg Kjdpsfcl H Isfx Agzonf

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, axle configuration: 2 axles, first registration: 12/2025, next inspection (TÜV): 12/2028, fuel consumption (urban): 8.9 l/100km, fuel consumption (extra-urban): 7 l/100km, fuel consumption (combined): 7.5 l/100km, CO₂ emissions: 197 g/km, energy efficiency: A+, color: white, number of seats: 5, fuel: diesel, Equipment: airbag, cabin, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, trailer coupling, Passenger airbag, heated exterior mirrors, power steering, LED headlights, radio/tuner, tinted windows, electric window lifters, adjustable steering column, multifunction steering wheel, parking assistance (PDC) front sensors, parking assistance (PDC) rear sensors, parking assistance (PDC) with camera, pollen filter, seat heating, body-colored bumpers, full interior trim, partition wall, double passenger seat, partition wall with window, cargo area lining with wooden floor, side paneling in cargo area, LED daytime running lights, all-weather tires, privacy glass in rear compartment, power-folding exterior mirrors, electric exterior mirrors, hands-free system, Bluetooth hands-free system, height-adjustable driver’s seat, cabin air filter, keyless go, communication package, leather steering wheel, heated steering wheel, center armrest, multimedia system, non-smoker vehicle, USB port, hill-start assist, manual sliding doors, additional equipment available, start-stop system, technology package, traction control system (ASR), electronic traction system, outside temperature display, rear headrests, tire pressure monitoring system, rearview camera, automatic headlights, central locking with remote control, DAB+ digital radio, emergency brake assist, lumbar support, fatigue warning system, blind spot assist, touchscreen, traffic sign recognition, 2-zone automatic climate control, steel wheels, high beam assist, sliding door on both sides, left sliding door, right sliding door, keyless central locking, speed limiter, wireless charging for smartphones, fully digital instrument cluster, Android Auto, Apple CarPlay, spare wheel, Connect package, Worksite package, increased payload, higher ground clearance, engine protection cover underbody, digital rearview mirror for rear traffic and passenger side blind spot, Audio System IVI mid, 10-inch touchscreen, 12V, 120W socket in glove compartment and left D-pillar, bumpers, door handles and sliding door rail cover painted in body color, side moldings and exterior mirror caps painted black, 17-inch black steel wheels with wheel covers, interior design package: dashboard and door panels in black, chrome-plated air vents, closed storage compartments: center dashboard, under passenger side. Kodpsx Ik Uzefx Agzjnf

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 26021.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1657 hours Kedpexz Ufhofx Agzenf Battery capacity: 48 V / 750 Ah Options: - VNA (Very Narrow Aisle) truck - with wire guidance Condition: Like new!!

Condition: new, The scope of delivery includes: 2.070x wire grating, new Material color: sendzimir galvanized load: 500 kg; with evenly distributed load execution: laid on Depth: approx. 1.100 mm ( direction of bearing bar ) width: approx. 1.150 mm Knsdpfx Aji Hkphegzsf Mesh size: approx. 100 x 60 mm number of bars: 3 pcs. Weight: 5,00 kg | pcs.

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm Knodpfx Agsx I Icvszof -Weight: 6 kg

Condition: new, The scope of delivery includes: 01x wire grating, new Material color: sendzimir galvanized Execution: laid-on shelf grating, folded on both sides total depth: 1.112 mm clear span: 1.000 mm total width: 890 mm mesh size: 106 x 72.5 mm wire thickness: 3,8 mm Number of beams: 4 pcs. Unit weight: approx. 5.14 kg Technical data: Tested load capacity: 500 kg according to ANSI MH 26.2 for beam depth: 1.100 mm Assumed beam width: 50 mm Application for indoor use only Possibility of use: Shelf size/ modules required per shelf Knjdpoilk Ngofx Agzsf 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat resistant sheets: On request, we can offer you heat resistant sheets (see picture material) for sale; prices on request. Fire protection has special requirements. Therefore, the wire meshes can be provided with a welded-on heat shield. And should you need a push-through protection for cardboard boxes, the heat shield can also be made with a bend. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this article is subject to additional costs, which will be charged separately to the customer. depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ Kjdsx I H Rxspfx Agzjnf -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Condition: excellent (used), The scope of delivery includes: 01x lattice box, used Length: approx. 820 mm Depth: approx. 420 mm Height: approx. 420 mm Material: steel Material color: galvanized Wire Ø: approx. 4.50 mm Mesh width: approx. 54 x 54 mm Stackable: yes Stacking edge: 30 x 18 mm (W x H) Inner height: front approx. 185 mm | rear: approx. 390 mm Weight / piece: approx. 15.74 kg Note: half open in width Knjdpfx Agomnnvaszsf Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m Kjdpfxex I E U Ae Agzenf -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Condition: good (used), The scope of delivery includes: 106x wire gratings, new Material color: sendzimir galvanized load: 500 kg; with evenly distributed load execution: laid on Depth: approx. 1.100 mm ( bearing bar direction ) width: approx. 1.150 mm Mesh size: approx. 100 x 60 mm number of bars: 3 pcs. Kjdpji Hkpdofx Agzenf Weight: 5,00 kg | pcs.

Condition: good (used), MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg Knjdpefc T Tuofx Agzof

Condition: new, The scope of delivery includes: 01x wire grating, new Material color: sendzimir galvanized Execution: laid-on shelf grating, folded on both sides total depth: 1.112 mm clear span: 1.000 mm total width: 890 mm mesh size: 106 x 53 mm wire thickness: 3,8 mm Number of beams: 7 pcs. Unit weight: approx. 7.53 kg Technical data: Tested load capacity: 1,000 kg according to ANSI MH 26.2 for beam depth: 1,100 mm Assumed crosshead width: 50 mm Application for indoor use only Possibility of use: Shelf size/ modules required per shelf 1,100 x 1,800 mm/ 2 pcs. 1,100 x 2,700 mm/ 3 pcs. 1,100 x 3,600 mm/ 4 pcs. Heat resistant sheets: On request, we can offer you heat resistant sheets (see picture material) for sale; prices on request. Fire protection has special requirements. Therefore, the wire meshes can be provided with a welded-on heat shield. And should you need a push-through protection for cardboard boxes, the heat shield can also be made with a bend. Kjdpfx Asilk Nrjgzjnf General information about the article: This item is offered for pickup only. Any further transport or shipment of this or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, The scope of delivery includes: 01x wire grating, new Material color: sendzimir galvanized load: 500 kg; with evenly distributed load execution: laid on Depth: approx. 1.100 mm ( bearing bar direction ) width: approx. 1.150 mm Kodei Hkpaepfx Agzjnf Mesh size: approx. 100 x 60 mm number of bars: 3 pcs. Weight: 5,00 kg | pcs.