Used Wire Electrode for sale (3,132)

Condition: used, Wire electrode, welding wire, welding wire -Manufacturer: Bohler, started roll of MAG wire electrode -Type: DT 1.4829 AWS: ER 309 Ø 1.2 mm -Dimension: Ø 300/100 mm Rjdpfx Asfu Trkoc Tjcd -Weight roll: 12.8 kg

Condition: like new (used), ELBOR MAG welding wire electrode Type SG-3 Condition: as new – original packaging Rcedpfoxbftvex Ac Tjd EN ISO 14341-A-G4 G46 Si1 4M/G42 3C AWS A5.18-05: ER70S-6 15kg – pack Diameter 0.8 mm

Condition: like new (used), ELBOR MAG - Wire Electrode Rodpfx Acexbfnyo Tscd Type SG-3 Condition: As new EN ISO 14341-A- (2011) G 46 4M21 4Si1/G42 3C1 AWS A5.18-05: ER70S-6 Diameter: 1.0 mm 250 kg drum Approx. 230 kg still available in the drum

Year of construction: 2010, condition: new, Wire electrodes ELGACORE - MXA 100 Rjdshq T Iijpfx Ac Tecd 1.4 mm diameter Approx. 60 pieces from stock

Condition: good (used), Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm Rodpofcl H Ijfx Ac Tocd -Weight: 8.1 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V Rsdpfx Aeq Rxz Toc Tocd -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: used, Module converter, electronic module Rcodpfx Asfcl H Uoc Tod -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Redpsmk S Slsfx Ac Tocd Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Rcjdpfx Aey S Nmdsc Ted

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! Redpfxszlnrce Ac Tscd TECHNICAL DETAILS Travel range, X-axis: 350 mm Travel range, Y-axis: 220 mm Travel range, Z-axis: 220 mm Maximum workpiece dimensions: 1,000 × 550 × 220 mm Maximum workpiece weight: 750 kg Maximum taper: ±45° / 220 mm Standard taper: 30° Wire diameter: 0.1–0.3 mm Cutting speed: 300 mm²/min MACHINE DETAILS CNC control: PC-based multi-processor control Accuracy and surface finish Surface roughness Ra: min. 0.22 µm Measuring resolution: 0.05 µm EQUIPMENT Windows XP Touchscreen

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 193.006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, controller model: AGIEVISION / AGIE HSS-Steuerung, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, maximum dimensions: 750 × 550 × 250 mm Workpiece weight, maximum: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg Rjdpfx Ajzpypzec Tjcd EQUIPMENT Fully automatic wire threading

Condition: excellent (used), Year of construction: 1998, Ref:11126 . 1998 Rilecart B-599 Automatic Wire Binding Machine A productive ‘Wire-O’ binding machine with speeds up to 4000 bindings per hour, able to bind a wide variety of book thicknesses using diameters from 5/16” up to 1 inch for a maximum binding thickness of 23 mm. Comprising; Hand feed position for the feeding of pre punched book blocks B599 Automatic closing unit with; Twin Spool wire unwinds system, with paper waste extraction, with automatic change over when spool is low / empty, which ensures consistently high production. Computer controlled programming of binding, from one length, skip feed, up to five lengths in one pass. Automatic wire cutter, toothed belts for different pitch, 3:1 and 2:1. Rodpfx Acozmx Uds Tocd Sprockets for 2:1 and 3:1 pitch. Capable of processing either round or square punched work. Speed adjustable up to 4000 bindings per hour, depending on format, thickness, operator skill, and the quality of work being bound. Dedicated wire guide, turning, closing tools for each diameter, with fast change over times possible due to easy to install methods for the tooling. Microprocessor controlled quality checking systems to ensure that production runs smoothly, with read out on the computer screen advising the operator and management of faults, and productivity information. Extended shingle belt delivery. A set of tools for all common sizes of wire from 5/16” up to 1”. Specification: B599 – Formats, Max. binding size: 400mm, Max. transport size: 500 mm Min. binding size: 100mm, Min. transport size: 80 mm Max. bind thickness: 23 mm, Min. 3 mm Max. binding wire diameter: 1”, Min. 5/16” Tooling included; 2:1" pitch - 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Max. working speed: 4,000 books/hour. Electric supply: 3 x 380V. + neutral, 50 Hz. Power req. 8 kW. Compressed air supply (required): 8 Atm,10 mc/hour.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox AdvancedPunch Pro&eWire” wire-binding system. Items for sale: 1x Xerox AdvancedPunch Pro&eWire with the following accessories: Includes A-FN08 (C/Z Folder) Includes A-FN13 (PR Finisher) Includes ZVC-1 (PR Interface Module) Rcjdpfx Acozpwt De Ted Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for proper function Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Tank Dimensions: W 790 x D 590 x H 320mm Rodpjwqgh Aefx Ac Tscd Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Condition: excellent (used), Year of construction: 2003, Sodick AQ535L wire EDM machine Year: 2007 5-axis Technical details: X-axis travel of 550 mm Y-axis travel of 350 mm Z-axis travel of 300 mm U/V axis: 80/80 mm Work table size is 790 x 500 mm, Maximum workpiece weight capacity of 800 kg Work tank dimensions (W x D): 1100 x 720 mm Distance from floor to table top: 1005 mm Workpiece capacity: Maximum workpiece height: 290 mm Wire system: Rsdpfxozqzzns Ac Tjcd • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L

Condition: used, Year of construction: 2012, Automatic wire threading, Travel range: x 600 mm y 400 mm z 310 mm Rcodpjzcdwwofx Ac Tod Includes cooler Machine is in excellent condition.

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Rsdpfex Hgg Djx Ac Tecd

Condition: used, Year of construction: 2013, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Rcedpfx Acozcdtxe Ted Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm y 300 mm z 220 mm Wear-free tubular direct drive Water bath Rcjdem Uyuxopfx Ac Ted incl. cooler Automatic wire threading

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Rcodpfex Hghuox Ac Tjd incl. chiller Automatic wire threading Water bath

Condition: used, Year of construction: 2007, Travel distance: Rcjdjuu Dl Ropfx Ac Tsd X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Rcjdpjw Swd Aefx Ac Ted

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, The GF AgieCharmilles CUT 30P, manufactured in 2015, is a powerful and precise used wire EDM machine, specifically designed for demanding machining operations in the metalworking industry. Thanks to state-of-the-art technology and intelligent control, the CUT 30P offers the highest cutting quality, low maintenance requirements, and excellent return on investment. Key Features & Benefits: ✅ Large work area: Workpiece size: max. 1050 x 800 x 350 mm Maximum workpiece weight: 1,000 kg Travel: X/Y/Z: 600 x 400 x 350 mm U/V: ± 50 mm Tapered machining up to ± 25° / 80 mm ✅ High-precision machining: Positional accuracy through glass scales Automatic wire tensioning for consistently accurate cutting results Surface quality up to Ra < 0.25 µm ✅ Efficient wire system: Wire diameter: 0.15 – 0.30 mm Automatic wire feeding and re-threading 25 kg wire spool for long operating times ✅ Intelligent control & user-friendliness: Windows-based control with an intuitive user interface 15” LCD display for easy programming DXF import & 3D graphics check for precise simulations ✅ Reliability & low operating costs: Energy-efficient generator with low power consumption (9 kVA) Low maintenance costs thanks to robust design and durable wear parts Rcjdpfezmrnqex Ac Tjd Integrated collision protection for maximum safety Ideal for: ✔ Tool & mold making ✔ High-precision components ✔ Series production & prototyping Experience the highest productivity with the GF AgieCharmilles CUT 30P – the perfect choice for precise and economical wire EDM! 📌 Our used machine, manufactured in 2015, will be cleaned, inspected, and thoroughly tested before sale to ensure the highest quality and reliability. 📩 Contact us for a customized offer or a demonstration! We would also be happy to offer you commissioning and training on the machine.

Condition: good (used), Year of construction: 1998, workpiece weight (max.): 650 kg, travel distance X-axis: 520 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, overall weight: 2,300 kg, Erosion machine, type: A04B Redpfxszk U Hqo Ac Tecd

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Rcjdpeznkk Tefx Ac Tsd